0
TECHNICAL PAPERS

Long-Term Structural Analysis of 3-D Ship Structures Using a New Stiffened Plate Element

[+] Author and Article Information
Y. V. Satish Kumar, Madhujit Mukhopadhyay

Department of Ocean Engineering and Naval Architecture, Indian Institute of Technology, Kharagpur-721 302, India

Tanmay Sarkar

Ship Surveyor, Indian Register of Shipping, Mumbai-400 072, India

J. Offshore Mech. Arct. Eng 123(1), 29-37 (Oct 27, 2000) (9 pages) doi:10.1115/1.1336800 History: Received February 07, 2000; Revised October 27, 2000
Copyright © 2001 by ASME
Your Session has timed out. Please sign back in to continue.

References

Taylor,  K. V., and Lundgren,  J., 1975, “Full-Scale Static and Dynamic Measurements on m. v. ‘NIHON’,” Trans. RINA,117, pp. 49–72.
Hattori,  K., and Iwahashi,  Y., 1985, “A Consideration in the Phase Difference Between the Longitudinal and transverse strength,” J. Soc. Naval Architects Jpn.,156, pp. 273–282.
Mano,  H., and Horita,  M., 1987, “Longitudinal Strength of Destroyer (1st Report) Wave Load (in Japanese),” J. Soc. Naval Architects Jpn.,161, pp. 226–233.
Katory,  M., and Chiu-Fai,  L., 1992, “Hydroelastic Performance Predictions for Three Ships,” Trans. RINA,134, pp. 109–130.
Bolyston,  J. W., de Koff,  D. J., and Muntjweref,  J. I., 1974, “SL-7 Container Ships: Design, Construction and Operational Experience,” Trans. SNAME,82, pp. 427–478.
Taylor,  K. V., Payer,  H. G., and Swift,  P. M., 1986, “Strength Investigations of Tanker Longitudinal Bulkhead Plating,” Trans. RINA,128, pp. 121–141.
Elbatouti,  A. M. T., Jan,  H.-Y., and Stiansen,  S. G., 1976, “Structural Analysis of a Container Ship Steel Model and Comparison with Test Results,” Trans. SNAME,84, pp. 146–168.
Paik,  Jeom K., Kim,  Deo H., Bong,  Hyon S., Kim,  Man S., and Han,  Sung K., 1992, “Deterministic and Probabilistic Safety Evaluation for a New Double-Hull Tanker with Transverseless System,” Trans. SNAME,100, pp. 173–198.
Mukhopadhyay,  M., and Satsangi,  S. K., 1984, “Isoparametric Stiffened Plate Bending Element for the Analysis of Ship’s Structures,” Trans. RINA,126, pp. 141–151.
Sinha,  G., Sheikh,  A. H., and Mukhopadhyay,  M., 1992, “A New Finite Element Model for the Analysis of Arbitrary Stiffened Shells,” Finite Elem. Anal. Design, 12, pp. 241–271.
Garrison, C. J., and Chow, P. Y., 1972, “Wave Forces on Submerged Bodies,” Proc. ASCE, Waterways and Harbour Division, 98 , pp. 375–392.
Sarkar, T. and Singh, S. P., 1998, “Estimation of Short and Long Term Hydrodynamic Loading—Present Status at IRS,” Technical Report, Indian Register of Shipping, India.
Allman,  D. J., 1984, “A Compatible Triangular Element Including Vortex Rotations for Plane Elasticity Analysis,” Comput. Struct., 19, pp. 1–8.
Cook, R. D., Malkus, D. S., and Plesha, M. E., 1990, Concepts and Application of Finite Element Analysis, Wiley, New York.
Jankowski, J., 1993. “Long-Term Prediction of Ship Motions and Loads—Practical Approach,” Ship Motions and Loads—Formulation of Rules, Polski Rejestr Statkon Classification, Gdansk, Poland, pp. 8–23.
Mizusawa,  T., Kajita,  T., and Naruoka,  M., 1980, “Buckling of Skew Plate Structures using B-Spline Functions,” Int. J. Numer. Methods Eng., 15, pp. 87–96.
Mukherjee,  A., and Mukhopadhyay,  M., 1990, “Finite Element Buckling Analysis of Stiffened Plates,” Comput. Struct., 34, pp. 795–803.
Satish Kumar, Y. V., and Mukhopadhyay, M., “Finite Element Analysis of Ship Structures Using a New Stiffened Plate Element,” Applied Ocean Research (in press).
IRS—Rules and Regulations, Part III: General Hull Requirements, 1996, Indian Register of Shipping, India.

Figures

Grahic Jump Location
Section of a rectangular box-shaped vessel
Grahic Jump Location
Variation of stress, σy, along the centerline of the main deck of a rectangular box-shaped vessel
Grahic Jump Location
Variation of stress, σx, across the cross section of the rectangular box-shaped vessel at frame 30
Grahic Jump Location
Finite element mesh of the mini-bulk carrier
Grahic Jump Location
Quadrilateral panels of the hydrodynamic model of the mini-bulk carrier
Grahic Jump Location
Rectangular plate with T-stiffeners
Grahic Jump Location
Variation of moment, Mx, at y=1.27 m in a rectangular plate with T-stiffeners
Grahic Jump Location
Variation of stress, σx, along the main deck of mini-bulk carrier
Grahic Jump Location
Stress contours on main deck
Grahic Jump Location
Stress contours on transverse bulkhead at frame 53
Grahic Jump Location
DKT plate bending element
Grahic Jump Location
Stiffener inside the plate element
Grahic Jump Location
60-m rectangular box-shaped vessel
Grahic Jump Location
Variation of stress, σx, along the tank bottom of the mini-bulk carrier

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In