This present study deals with a new mechanical device consisting of a set of safety membranes, which has been successfully applied in several middle and small hydropower stations in China instead of a surge tank. Safety membranes are installed on the penstock near the powerhouse as controlled weak points. When the pressure caused by load rejection rises to the preset explosive value, one or more membranes rupture, protecting the penstock and the unit from damage. The device is simple, reliable and economical. The method of characteristics is employed to establish numerical model of safety membranes to simulate their rupture behavior, which is then introduced to investigate how to determine the number and diameter of membranes from two aspects, large fluctuation and hydraulic disturbance. The results show that the diameter of the membranes depends on the negative pressure along pipeline under hydraulic disturbance while the number of the membrane depends on the maximum water hammer pressure under large fluctuation during load rejection of the unit. The conclusion of membrane selection can perfect the present theory of safety membranes, and provide the theoretical guidance and practical basis for membrane device design and safety operation.
- Fluids Engineering Division
Numerical Simulation on Rupture Behavior and Selection of Safety Membranes
- Views Icon Views
- Share Icon Share
- Search Site
Sheng, C, Jian, Z, & Yu, X. "Numerical Simulation on Rupture Behavior and Selection of Safety Membranes." Proceedings of the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting collocated with the ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels. Volume 1A, Symposia: Advances in Fluids Engineering Education; Turbomachinery Flow Predictions and Optimization; Applications in CFD; Bio-Inspired Fluid Mechanics; Droplet-Surface Interactions; CFD Verification and Validation; Development and Applications of Immersed Boundary Methods; DNS, LES, and Hybrid RANS/LES Methods. Chicago, Illinois, USA. August 3–7, 2014. V01AT02A003. ASME. https://doi.org/10.1115/FEDSM2014-21097
Download citation file: