Skip Nav Destination
1-6 of 6
Proc. ASME. AJKFluids2019, Volume 3A: Fluid Applications and Systems, V03AT03A047, July 28–August 1, 2019
Paper No: AJKFluids2019-4902
...EFFECT OF MOISTURE CONTENT ON MIXING AIR WITH WATER-LIQUID FLOWING THROUGH INVERTED U-TUBE FOR POWER PLANT CONDENSER APPLICATIONS Khaled Yousef1, Ahmed Hegazy2 Mechanical Engineering Department, Menoufia University, Shibin El Kom, Egypt Abraham Engeda3 Turbomachinery Lab, Michigan State University...
Proc. ASME. AJKFluids2019, Volume 3A: Fluid Applications and Systems, V03AT03A042, July 28–August 1, 2019
Paper No: AJKFluids2019-5308
...- tion formed on a can surface is also considered. The effect of condensation is taken into account by adjusting a contact angle. The liquid pouring from a can trickles down along the can body. The computation reproduces these experimental observations. Keywords: Numerical simulation, Beverage can...
Proc. ASME. AJKFluids2019, Volume 5: Multiphase Flow, V005T05A019, July 28–August 1, 2019
Paper No: AJKFluids2019-4917
...Abstract Abstract Condensation phenomenon has been studied actively for decades because of its extensive and significant applications in various fields of technology and engineering. The condensation phenomenon of condensable component in supersonic flows is still not understood very well...
Proc. ASME. FEDSM2007, Volume 2: Fora, Parts A and B, 1377-1385, July 30–August 2, 2007
Paper No: FEDSM2007-37644
... different flow velocities in a paper by Mariscal et al. . Bourgriou et al  used the film method which takes the influence of mass transfer on the thermal calculation into account. They developed a model to simulate the heat transfers by condensation of the humid air on fined-tubes 1 Copyright © 2007...
Proc. ASME. HT-FED2004, Volume 3, 203-210, July 11–15, 2004
Paper No: HT-FED2004-56559
... 03 03 2009 A model has been developed for predicting the amount of condensate retained as drops on the air-side of heat exchangers operating under dehumidifying conditions. For a coil with a given surface wettability, characterized by the advancing contact angle, the maximum diameter...
Proc. ASME. FEDSM2003, Volume 1: Fora, Parts A, B, C, and D, 2981-2987, July 6–10, 2003
Paper No: FEDSM2003-45277
... water causes flashing and generates steam. Steam is then condensed by the water in the containment. This paper describes our study of high pressure saturated water that rapidly contacts low-pressure, low-temperature water. The purpose of the study was to clarify the transient phenomena that occur when...