Skip Nav Destination
1-7 of 7
Keywords: swirling flowClose
Proc. ASME. FEDSM2021, Volume 3: Fluid Mechanics; Micro and Nano Fluid Dynamics; Multiphase Flow, V003T08A007, August 10–12, 2021
Paper No: FEDSM2021-66013
... to study the erosion behavior and mitigate the erosion problem for safety purposes and greater equipment longevity. In order to alleviate the adverse results of sand erosion in elbows, the current study investigated the potential of the geometrically induced swirl flow generated from flow passing through...
Proc. ASME. FEDSM2020, Volume 2: Fluid Mechanics; Multiphase Flows, V002T03A037, July 13–15, 2020
Paper No: FEDSM2020-20064
...Abstract Abstract Stereo-PIV is used to map turbulent strongly swirling flow inside a pipe connected to a closed recirculating system with a transparent test section of 0.6 m in length and a pipe diameter of 0.041 m. The Perspex pipe was immersed inside a water trough to reduce the effects...
Proc. ASME. AJKFluids2019, Volume 3A: Fluid Applications and Systems, V03AT03A045, July 28–August 1, 2019
Paper No: AJKFluids2019-4802
... Abstract The present study addresses itself to the performance assessment of a novel in-line gas-liquid separator. The separator is developed by FRAMES company under the name of SwirlSep based on the interaction of a swirling flow, generated by an innovative devise called swirl cage...
Proc. ASME. AJKFluids2019, Volume 5: Multiphase Flow, V005T05A034, July 28–August 1, 2019
Paper No: AJKFluids2019-4685
... Abstract This paper presents an experimental study conducted on turbulent single and two-phase swirling flow in a circular pipe with a bluff body. Laser Doppler Velocimetry (LDV) was used to measure liquid velocity radial profiles. The measurements were performed in a closed water-air loop...
Proc. ASME. FEDSM2003, Volume 1: Fora, Parts A, B, C, and D, 1353-1361, July 6–10, 2003
Paper No: FEDSM2003-45183
... in this region, the distance the plume will travel down the leeward side of the chimney is a function of the ambient wind velocity and the plume velocity. Prediction of this complex, turbulent, three dimensional swirling flow including mixing of different temperature gases and the development of remedial devices...
Proc. ASME. FEDSM2003, Volume 1: Fora, Parts A, B, C, and D, 1061-1070, July 6–10, 2003
Paper No: FEDSM2003-45582
... Streamwise development of the axial velocity field in a confined, decaying swirling flow is explored in the present study. A tangential injection mechanism produces swirling flow at the inlet of a constant diameter pipe. Particle image velocimetry is employed for axial velocity measurements...
Proc. ASME. FEDSM2005, Volume 1: Symposia, Parts A and B, 677-686, June 19–23, 2005
Paper No: FEDSM2005-77210
... Time-dependent simulations of a particle-laden swirl flow in a pipe expansion based on the Euler-Lagrange approach are presented. Two equation and Reynolds Stress Models were used in the calculation of turbulent quantities in the continuous phase. Additional attention was payed to the influence...