Skip Nav Destination
1-9 of 9
Proc. ASME. GT2021, Volume 4: Controls, Diagnostics, and Instrumentation; Cycle Innovations; Cycle Innovations: Energy Storage; Education; Electric Power, V004T09A008, June 7–11, 2021
Paper No: GT2021-59470
...Abstract Abstract This paper describes the full-scale turbine section validation of the GT36 heavy duty gas turbine, which was conducted in a test Power Plant in Birr, Switzerland. The GT36 Test Power Plant is extensively instrumented with both standard and specialised instrumentation...
Proc. ASME. GT2020, Volume 2D: Turbomachinery, V02DT38A018, September 21–25, 2020
Paper No: GT2020-15207
..., computational power and finally, processing and validation of output data. Additionally, different applications have been used for thermal and structural modelling in order to utilise best capabilities in thermal and contact modelling but also enable scalability on high performance computing. However, utilising...
V. Granet, P. Sierra Sanchez, A. Cuquel, P. Günster, A. Wickström, D. Pennell, G. Singla, G. Früchtel
Proc. ASME. GT2020, Volume 4B: Combustion, Fuels, and Emissions, V04BT04A032, September 21–25, 2020
Paper No: GT2020-16013
.... The development and validation of a two-stage sequential combustor, so-called Constant Pressure Sequential Combustion (CPSC) system, to achieve these goals has been accomplished by Ansaldo Energia. The CPSC consists of a premix burner system (First Stage) and of a sequential burner (SB) in series within a can...
Proc. ASME. GT2020, Volume 9: Oil and Gas Applications; Organic Rankine Cycle Power Systems; Steam Turbine, V009T21A008, September 21–25, 2020
Paper No: GT2020-15213
... that is in a class by itself in the Oil and Gas industry. To give an idea of the dimensions, the ball bearing installed has a bore diameter of 320mm with a ball diameter close to 60mm. The test bench was crucial to validate the sump configuration for on-shore and off-shore applications and to define the inputs range...
Proc. ASME. GT2010, Volume 7: Turbomachinery, Parts A, B, and C, 1937-1949, June 14–18, 2010
Paper No: GT2010-22666
... for rather large scale turbo machines and that they are not necessarily suitable for application to small turbines. In this paper many of the commonly known and well established loss models used for the preliminary design of radial turbines were collected, reviewed, and validated with respect...
Proc. ASME. GT2008, Volume 3: Combustion, Fuels and Emissions, Parts A and B, 913-919, June 9–13, 2008
Paper No: GT2008-51208
... of emissions and operational requirements. Furthermore, the development / validation program will continue to reduce emissions through extended programs for future engines. Siemens H-Class Combustion system Testing Validation Proceedings of ASME Turbo Expo 2008: Power for Land, Sea and Air...
Proc. ASME. GT2007, Volume 6: Turbo Expo 2007, Parts A and B, 879-893, May 14–17, 2007
Paper No: GT2007-28123
..., a design tool is needed which can be executed quickly for each of many operating conditions, and on each of several design sections which will accurately capture loss, turning and loading. This paper presents the validation of a boundary layer code, MISES, versus experimental data from a 2-D linear cascade...
Proc. ASME. GT2007, Volume 6: Turbo Expo 2007, Parts A and B, 1379-1386, May 14–17, 2007
Paper No: GT2007-27744
... stator and stator protrusions were carried out and the results compared to previously gathered experimental data in order to validate the CFD code and improve confidence in its ability to model the given situations. Comparisons of cooling air flow enthalpy rises, torques required to drive the disc...
Proc. ASME. GT2004, Volume 2: Turbo Expo 2004, 97-105, June 14–17, 2004
Paper No: GT2004-53281
... with the experimental data. 25 11 2008 Bearing chamber PIV CFD turbulence modelling validation Proceedings of ASME Turbo Expo 2004 Power for Land, Sea and Air Keywords: Bearing modelling, validation INTRODUCTION The evolution of based on correlatio knowledge collated ov consuming experime...