In this paper the contact mechanism between stator and rotor will be considered in detail, which plays a key role in ultrasonic motors. A planar contact model for the stator-rotor interaction in traveling-wave type ultrasonic motors is derived, including rotor flexibility and differenciating between stick and slip regions in the contact zones. The model analysis shows that depending on the motor’s operating conditions, complicated contact behavior may occur with several stick-slip subzones in each contact zone. The typical nonlinear resonance observed in ultrasonic motors can be explained with the present analysis. Both the stiffness of the contact layer and of the rotor may drastically influence the speed-torque characteristics. The results will contribute to a better understanding of the contact mechanics in ultrasonic motors.
Skip Nav Destination
e-mail: thomas.sattel@tu-ilmenau.de
Article navigation
Research Papers
The Contact Problem in Ultrasonic Traveling-Wave Motors
Thomas Sattel,
Thomas Sattel
Mechatronics Group, Department of Mechanical Engineering,
e-mail: thomas.sattel@tu-ilmenau.de
Ilmenau University of Technology
, Max-Planck-Ring 12, Building F, 98684 Ilmenau, Germany
Search for other works by this author on:
Peter Hagedorn,
Peter Hagedorn
Fellow ASME
Dynamics and Vibrations Group, Department of Mechanical Engineering,
Darmstadt University of Technology
, 64289 Darmstadt, Germany
Search for other works by this author on:
Joachim Schmidt
Joachim Schmidt
Dynamics and Vibrations Group, Department of Mechanical Engineering,
Darmstadt University of Technology
, 64289 Darmstadt, Germany
Search for other works by this author on:
Thomas Sattel
Mechatronics Group, Department of Mechanical Engineering,
Ilmenau University of Technology
, Max-Planck-Ring 12, Building F, 98684 Ilmenau, Germanye-mail: thomas.sattel@tu-ilmenau.de
Peter Hagedorn
Fellow ASME
Dynamics and Vibrations Group, Department of Mechanical Engineering,
Darmstadt University of Technology
, 64289 Darmstadt, Germany
Joachim Schmidt
Dynamics and Vibrations Group, Department of Mechanical Engineering,
Darmstadt University of Technology
, 64289 Darmstadt, GermanyJ. Appl. Mech. May 2010, 77(3): 031014 (11 pages)
Published Online: February 23, 2010
Article history
Received:
January 17, 2004
Revised:
July 24, 2009
Online:
February 23, 2010
Published:
February 23, 2010
Citation
Sattel, T., Hagedorn, P., and Schmidt, J. (February 23, 2010). "The Contact Problem in Ultrasonic Traveling-Wave Motors." ASME. J. Appl. Mech. May 2010; 77(3): 031014. https://doi.org/10.1115/1.4000380
Download citation file:
Get Email Alerts
Mechanics of a Tunable Bistable Metamaterial With Shape Memory Polymer
J. Appl. Mech (January 2025)
Phase Diagrams for Anticlastic and Synclastic Bending Curvatures of Hexagonal and Reentrant Honeycombs
J. Appl. Mech (January 2025)
Nucleation of Fracture: The First-Octant Evidence Against Classical Variational Phase-Field Models
J. Appl. Mech (January 2025)
Related Articles
Modal Analysis and Output Characteristics of an Ultrasonic Motor With a Square Prismatic Shell Stator
J. Vib. Acoust (April,2024)
Effect of the Rotor/Stator Interface Condition Including Contact Type, Geometry, and Material on the Performance of Ultrasonic Motor
J. Tribol (October,1994)
FE Analysis and LDA Measurement of the Dynamic Rotor/Stator Contact in a Ring-Type Ultrasonic Motor
J. Tribol (October,1993)
A New Manipulator Based on ISMAAs and TWUSMs
J. Mech. Des (November,2009)
Related Proceedings Papers
Related Chapters
Fans and Air Handling Systems
Thermal Management of Telecommunications Equipment
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
QP Based Encoder Feedback Control
Robot Manipulator Redundancy Resolution