Many phenomena depend on the features of the fine-scale structure of turbulence, including its intermittency. This article discusses the problem of the turbulent “shear” in biotechnology including the effect of the shear stress on particles (cells, flocs, cells immobilized on microcarriers). Traditionally, the effect of intermittency has not been taken into account in the shear problem and the theory of isotropic turbulence introduced by Kolmogorov (1941) based on average values of the rate of kinetic energy dissipation, velocity fluctuactions, rates of strain, turbulent stresses etc. has been applied. In this paper a multifractal formalism is employed to describe intermittency; the results of multifractal approach are then compared with predictions of other models of intermittent and non-intermittent turbulence. The multifractal model of intermittent turbulence has been used to derive equations describing flow-particle interactions, including: equations describing turbulent stresses acting upon particles in the inertial and viscous subranges of turbulence; mass transfer to small particles suspended in turbulent fluid; turbulent rupture of flocs; particles encounters in turbulent flow including the average number of collisions per unit time in the inertial and viscous subranges of turbulence and the severity of collisions; mechanical stress generated by bubble coalescence. Generally, the article shows how the traditional approach to the shear problem in turbulence, based on the Kolmogorov theory, can be extended by including the influence of intermittency. This review article includes 47 references.
Skip Nav Destination
Article navigation
January 1998
Review Articles
Influence of Turbulent Mechanical Stresses on Microorganisms
J. Bałdyga,
J. Bałdyga
Department of Chemical and Process Engineering, Warsaw University of Technology, PL00645, Warsaw, Poland
Search for other works by this author on:
R. Pohorecki
R. Pohorecki
Department of Chemical and Process Engineering, Warsaw University of Technology, PL00645, Warsaw, Poland
Search for other works by this author on:
J. Bałdyga
Department of Chemical and Process Engineering, Warsaw University of Technology, PL00645, Warsaw, Poland
R. Pohorecki
Department of Chemical and Process Engineering, Warsaw University of Technology, PL00645, Warsaw, Poland
Appl. Mech. Rev. Jan 1998, 51(1): 121-140 (20 pages)
Published Online: January 1, 1998
Article history
Online:
April 20, 2009
Citation
Bałdyga, J., and Pohorecki, R. (January 1, 1998). "Influence of Turbulent Mechanical Stresses on Microorganisms." ASME. Appl. Mech. Rev. January 1998; 51(1): 121–140. https://doi.org/10.1115/1.3098987
Download citation file:
13
Views
0
Citations
Get Email Alerts
Cited By
A State-of-the-Art Review on Hemming: A Materials Processing Technology for Mechanical Joints
Appl. Mech. Rev (March 2022)
Constant Torque Mechanisms: A Survey
Appl. Mech. Rev (January 2022)
Design of Acoustic/Elastic Phase Gradient Metasurfaces: Principles, Functional Elements, Tunability, and Coding
Appl. Mech. Rev (March 2022)
Related Articles
Particle Diagnostics and Turbulence Measurements in a Confined Isothermal Liquid Spray
J. Eng. Gas Turbines Power (July,1993)
The Effect of Swirl on the Velocity and Turbulence Fields of a Liquid Spray
J. Eng. Gas Turbines Power (January,1992)
A Simple Kinetic Theory for Granular Flow of Rough, Inelastic, Spherical Particles
J. Appl. Mech (March,1987)
Performance of Two-Equation Turbulence Models for Flat Plate Flows With Leading Edge Bubbles
J. Fluids Eng (February,2008)
Related Chapters
Introduction
Mechanical Blood Trauma in Circulatory-Assist Devices
Antilock-Braking System Using Fuzzy Logic
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3
Laminar Fluid Flow and Heat Transfer
Applications of Mathematical Heat Transfer and Fluid Flow Models in Engineering and Medicine