Blood flow dynamics in the human right coronary artery have not been adequately quantified despite the clinical significance of coronary atherosclerosis. In this study, a technique was developed to construct a rigid flow model from a cast of a human right coronary artery. A laser photochromic method was used to characterize the velocity and wall shear stress patterns. The flow conditions include steady flow at Reynolds numbers of 500 and 1000 as well as unsteady flow with Womersley parameter and peak Reynolds number of 1.82 and 750, respectively. Characterization of the three-dimensional geometry of the artery revealed that the largest spatial variation in curvature occurred within the almost branch-free proximal region, with the greatest curvature existing along the acute margin of the heart. In the proximal segment, high shear stresses were observed on the outer wall and lower, but not negative, stresses along the inner wall. Low shear stress on the inner wall may be related to the preferential localization of atherosclerosis in the proximal segment of the right coronary artery. However, it is possible that the large difference between the outer and inner wall shear stresses may also be involved.
Skip Nav Destination
Article navigation
August 1999
Technical Papers
Velocity and Wall Shear Stress Patterns in the Human Right Coronary Artery
A. Kirpalani,
A. Kirpalani
Institute of Biomedical Engineering, University of Toronto, Toronto, Ontario, Canada
Search for other works by this author on:
H. Park,
H. Park
Institute of Biomedical Engineering, University of Toronto, Toronto, Ontario, Canada
Search for other works by this author on:
J. Butany,
J. Butany
Department of Pathology, University of Toronto, Toronto, Ontario, Canada
Search for other works by this author on:
K. W. Johnston,
K. W. Johnston
Institute of Biomedical Engineering; Department of Surgery, University of Toronto, Toronto, Ontario, Canada
Search for other works by this author on:
M. Ojha
M. Ojha
Institute of Biomedical Engineering; Department of Surgery, University of Toronto, Toronto, Ontario, Canada
Search for other works by this author on:
A. Kirpalani
Institute of Biomedical Engineering, University of Toronto, Toronto, Ontario, Canada
H. Park
Institute of Biomedical Engineering, University of Toronto, Toronto, Ontario, Canada
J. Butany
Department of Pathology, University of Toronto, Toronto, Ontario, Canada
K. W. Johnston
Institute of Biomedical Engineering; Department of Surgery, University of Toronto, Toronto, Ontario, Canada
M. Ojha
Institute of Biomedical Engineering; Department of Surgery, University of Toronto, Toronto, Ontario, Canada
J Biomech Eng. Aug 1999, 121(4): 370-375 (6 pages)
Published Online: August 1, 1999
Article history
Received:
March 10, 1998
Revised:
March 3, 1999
Online:
October 30, 2007
Citation
Kirpalani, A., Park, H., Butany, J., Johnston, K. W., and Ojha, M. (August 1, 1999). "Velocity and Wall Shear Stress Patterns in the Human Right Coronary Artery." ASME. J Biomech Eng. August 1999; 121(4): 370–375. https://doi.org/10.1115/1.2798333
Download citation file:
Get Email Alerts
Related Articles
Computational Modeling of LDL and Albumin Transport in an In Vivo CT Image-Based Human Right Coronary Artery
J Biomech Eng (February,2009)
Effect of Geometrical Assumptions on Numerical Modeling of Coronary Blood Flow Under Normal and Disease Conditions
J Biomech Eng (June,2010)
Computation of Hemodynamics in Tortuous Left Coronary Artery: A Morphological Parametric Study
J Biomech Eng (October,2014)
A Fluid–Structure Interaction Model of the Left Coronary Artery
J Biomech Eng (December,2018)
Related Proceedings Papers
Related Chapters
Cavitating Structures at Inception in Turbulent Shear Flow
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Dynamic Behavior of Pumping Systems
Pipeline Pumping and Compression Systems: A Practical Approach
Concluding remarks
Mechanical Blood Trauma in Circulatory-Assist Devices