The planar type 1 kW class solid oxide fuel cell (SOFC) stack using metallic interconnects such as ferritic stainless steel has been developed for application in a residential power generation system. For the intermediate temperature operation of the SOFC, a higher performance of anode-supported single cells of with a thin electrolyte layer of yttria-stabilized zirconia were fabricated by slurry coating, and their performances were improved by a microstructure-controlled anode substrate and by introducing alternative cathode materials. The thicknesses of the electrolyte and the cathode layers were about and , respectively. and ac impedance characteristics of single cells were evaluated at an intermediate temperature by using hydrogen gas as fuel. The maximum power density of the anode-supported cells was about at and at . In this work a 1 kW class SOFC stack composed of 37 cells was successfully manufactured and a SOFC system with balance of plant (BOP) (reformer, heat exchanger, catalytic burner, etc.) integrated for combined heat and power. The system designed for power generation by using a natural gas as fuel can concurrently produce electricity at a SOFC stack and hot water from recuperating heat. The system showed a maximum dc output of . Detailed status and experimental results of the 1 kW SOFC system will be discussed in this paper.
Skip Nav Destination
e-mail: yungsung@kepri.re.kr
Article navigation
May 2009
This article was originally published in
Journal of Fuel Cell Science and Technology
Research Papers
Fabrication and Demonstration of 1 kW Class SOFC Stack and System for Residential Power Generation Application
Young-Sung Yoo,
e-mail: yungsung@kepri.re.kr
Young-Sung Yoo
Korea Electric Power Research Institute (KEPRI)
, 103-16 Munji-Dong, Yuseong-Gu, Daejeon 305-380, Korea
Search for other works by this author on:
Taehee Lee,
Taehee Lee
Korea Electric Power Research Institute (KEPRI)
, 103-16 Munji-Dong, Yuseong-Gu, Daejeon 305-380, Korea
Search for other works by this author on:
Jin Hyeok Choi,
Jin Hyeok Choi
Korea Electric Power Research Institute (KEPRI)
, 103-16 Munji-Dong, Yuseong-Gu, Daejeon 305-380, Korea
Search for other works by this author on:
Tae-Sung Park,
Tae-Sung Park
Korea Electric Power Research Institute (KEPRI)
, 103-16 Munji-Dong, Yuseong-Gu, Daejeon 305-380, Korea
Search for other works by this author on:
Je-Myung Oh,
Je-Myung Oh
Korea Electric Power Research Institute (KEPRI)
, 103-16 Munji-Dong, Yuseong-Gu, Daejeon 305-380, Korea
Search for other works by this author on:
Chong-Young Kim
Chong-Young Kim
Korea Electric Power Research Institute (KEPRI)
, 103-16 Munji-Dong, Yuseong-Gu, Daejeon 305-380, Korea
Search for other works by this author on:
Young-Sung Yoo
Korea Electric Power Research Institute (KEPRI)
, 103-16 Munji-Dong, Yuseong-Gu, Daejeon 305-380, Koreae-mail: yungsung@kepri.re.kr
Taehee Lee
Korea Electric Power Research Institute (KEPRI)
, 103-16 Munji-Dong, Yuseong-Gu, Daejeon 305-380, Korea
Jin Hyeok Choi
Korea Electric Power Research Institute (KEPRI)
, 103-16 Munji-Dong, Yuseong-Gu, Daejeon 305-380, Korea
Tae-Sung Park
Korea Electric Power Research Institute (KEPRI)
, 103-16 Munji-Dong, Yuseong-Gu, Daejeon 305-380, Korea
Je-Myung Oh
Korea Electric Power Research Institute (KEPRI)
, 103-16 Munji-Dong, Yuseong-Gu, Daejeon 305-380, Korea
Chong-Young Kim
Korea Electric Power Research Institute (KEPRI)
, 103-16 Munji-Dong, Yuseong-Gu, Daejeon 305-380, KoreaJ. Fuel Cell Sci. Technol. May 2009, 6(2): 021008 (5 pages)
Published Online: February 24, 2009
Article history
Received:
June 14, 2007
Revised:
April 1, 2008
Published:
February 24, 2009
Citation
Yoo, Y., Lee, T., Choi, J. H., Park, T., Oh, J., and Kim, C. (February 24, 2009). "Fabrication and Demonstration of 1 kW Class SOFC Stack and System for Residential Power Generation Application." ASME. J. Fuel Cell Sci. Technol. May 2009; 6(2): 021008. https://doi.org/10.1115/1.2971129
Download citation file:
Get Email Alerts
Cited By
Optimization of Thermal Non-Uniformity Challenges in Liquid-Cooled Lithium-Ion Battery Packs Using NSGA-II
J. Electrochem. En. Conv. Stor (November 2025)
In Situ Synthesis of Nano PtRuW/WC Hydrogen Evolution Reaction Catalyst for Acid Hydrogen Evolution by a Microwave Method
J. Electrochem. En. Conv. Stor (November 2025)
Intelligently Constructing Polyaniline/Nickel Hydroxide Core–Shell Nanoflowers as Anode for Flexible Electrode-Enhanced Lithium-/Sodium-Ion Batteries
J. Electrochem. En. Conv. Stor (November 2025)
State of Health Estimation Method for Lithium-Ion Batteries Based on Multifeature Fusion and BO-BiGRU Model
J. Electrochem. En. Conv. Stor (November 2025)
Related Articles
Demonstration of a 4-Cells SOFC Stack Under Different Experimental Conditions
J. Fuel Cell Sci. Technol (February,2008)
Computational Fluid Dynamic Analysis of a Seal-Less Solid Oxide Fuel Cell Stack
J. Fuel Cell Sci. Technol (November,2009)
Analysis of Intermediate Temperature Solid Oxide Fuel Cell Transport Processes and Performance
J. Heat Transfer (December,2005)
Stainless Steel/Yttria Stabilized Zirconia Composite Supported Solid Oxide Fuel Cell
J. Fuel Cell Sci. Technol (October,2011)
Related Proceedings Papers
Related Chapters
Introduction
Consensus on Operating Practices for Control of Water and Steam Chemistry in Combined Cycle and Cogeneration
Research and Development of Hydrogen Permeation Barrier Coatings on Stainless Steel Surface
Proceedings of the International Conference on Technology Management and Innovation
Physiology of Human Power Generation
Design of Human Powered Vehicles