Skip Nav Destination
Issues
February 2012
This article was originally published in
Journal of Fuel Cell Science and Technology
ISSN 1550-624X
EISSN 1551-6989
In this Issue
Research Papers
Influence of High Current Cycling on the Performance of SOFC Single Cells
J. Fuel Cell Sci. Technol. February 2012, 9(1): 011001.
doi: https://doi.org/10.1115/1.4004639
Topics:
Current density
,
Cycles
,
Electrolytes
,
Mechanical stability
,
Reliability
,
Solid oxide fuel cells
,
Stress
,
Electrodes
,
Membrane electrode assemblies
,
Lanthanum
Intermediate Temperature Fuel Cell and Oxygen Reduction Studies With Carbon-Supported Platinum Alloy Catalysts in Phosphoric Acid Based Systems
J. Fuel Cell Sci. Technol. February 2012, 9(1): 011002.
doi: https://doi.org/10.1115/1.4004461
Topics:
Catalysts
,
Fuel cells
,
Oxygen
,
Platinum alloys
,
Temperature
,
Electrodes
,
Carbon
,
Platinum
The Influence of Chitosan Membrane Properties for Direct Methanol Fuel Cell Applications
J. Fuel Cell Sci. Technol. February 2012, 9(1): 011003.
doi: https://doi.org/10.1115/1.4005382
Design of a Membraneless Passive Planar Four-Cell Direct Borohydride Fuel Cell
J. Fuel Cell Sci. Technol. February 2012, 9(1): 011004.
doi: https://doi.org/10.1115/1.4005383
Topics:
Catalysts
,
Design
,
Fuel cells
,
Membranes
,
Ion exchange
,
Metals
,
Oxygen
,
Temperature
The Effects of Membrane Properties and Structural Parameters on the Non-Minimum Phase Behavior of the PEM Fuel Cell Humidification System
J. Fuel Cell Sci. Technol. February 2012, 9(1): 011005.
doi: https://doi.org/10.1115/1.4003752
Topics:
Design
,
Membranes
,
Proton exchange membrane fuel cells
,
Feedback
,
Mass transfer
,
Humidifiers
,
Control equipment
Investigation of the Effects of Catalyst Loading and Gas Flow Rate on Polymer Electrolyte Membrane (PEM) Fuel Cell Performance and Degradation
J. Fuel Cell Sci. Technol. February 2012, 9(1): 011006.
doi: https://doi.org/10.1115/1.4005120
Transient Model Validation of a Desulfurizer and a Syngas Generator for High Temperature Fuel Cells
J. Fuel Cell Sci. Technol. February 2012, 9(1): 011007.
doi: https://doi.org/10.1115/1.4005122
Topics:
Fuel cells
,
Generators
,
Geometry
,
Heat
,
Heat transfer
,
Methane
,
Modeling
,
Natural gas
,
Oxidation
,
Solid oxide fuel cells
Densification of Plasma Sprayed SOFC Electrolyte Layer Through Infiltration With Aqueous Nitrate Solution
J. Fuel Cell Sci. Technol. February 2012, 9(1): 011008.
doi: https://doi.org/10.1115/1.4004503
A Two-Dimensional Model for CO2/Fuel Multiphase Flow on the Anode Side of a DMFC
J. Fuel Cell Sci. Technol. February 2012, 9(1): 011009.
doi: https://doi.org/10.1115/1.4005384
Topics:
Anodes
,
Bubbles
,
Carbon dioxide
,
Direct methanol fuel cells
,
Flow (Dynamics)
,
Gas diffusion layers
,
Multiphase flow
,
Simulation
,
Fuels
,
Fibers
Modeling, Control, and Integration of a Portable Solid Oxide Fuel Cell System
J. Fuel Cell Sci. Technol. February 2012, 9(1): 011010.
doi: https://doi.org/10.1115/1.4005386
Topics:
Batteries
,
Control equipment
,
Fuel cells
,
Fuels
,
Solid oxide fuel cells
,
Capacitors
,
Temperature
,
Electronics
,
Modeling
,
Stress
PEMFC Flow Channel Geometry Optimization: A Review
J. Fuel Cell Sci. Technol. February 2012, 9(1): 011011.
doi: https://doi.org/10.1115/1.4005393
Topics:
Flow (Dynamics)
,
Proton exchange membrane fuel cells
,
Water
,
Design
Quantifying Individual Losses in a Direct Methanol Fuel Cell
J. Fuel Cell Sci. Technol. February 2012, 9(1): 011012.
doi: https://doi.org/10.1115/1.4005394
Dynamic Modeling of a Compact Heat Exchange Reformer for High Temperature Fuel Cell Systems
J. Fuel Cell Sci. Technol. February 2012, 9(1): 011013.
doi: https://doi.org/10.1115/1.4004709
Topics:
Flow (Dynamics)
,
Heat
,
Simulation
,
Temperature
,
Transients (Dynamics)
,
Fuels
,
Solid oxide fuel cells
,
Fuel cells
,
High temperature
,
Methane
Advanced Study of Non-Uniform Cell Voltage Distribution for a PEMFC Stack
J. Fuel Cell Sci. Technol. February 2012, 9(1): 011014.
doi: https://doi.org/10.1115/1.4005121
Fabrication Characteristics of SOFC Single Cell Using Nanocrystalline 1Ce10ScSZ Electrolyte Powder prepared by Co-Precipitation Process
J. Fuel Cell Sci. Technol. February 2012, 9(1): 011015.
doi: https://doi.org/10.1115/1.4003783
Topics:
Electrolytes
,
Solid oxide fuel cells
,
Coprecipitation
,
Temperature
,
Manufacturing
A Two-Dimensional Modeling Study of a Planar SOFC Using Actual Cell Testing Geometry and Operating Conditions
J. Fuel Cell Sci. Technol. February 2012, 9(1): 011016.
doi: https://doi.org/10.1115/1.4005124
Topics:
Anodes
,
Diffusion (Physics)
,
Electrodes
,
Flow (Dynamics)
,
Fuels
,
Geometry
,
Modeling
,
Porosity
,
Solid oxide fuel cells
,
Testing
Degradation Issues in Solid Oxide Cells During High Temperature Electrolysis
J. Fuel Cell Sci. Technol. February 2012, 9(1): 011017.
doi: https://doi.org/10.1115/1.4003787
Topics:
Delamination
,
Electrodes
,
Electrolysis
,
Electrolytes
,
Solid oxide fuel cells
,
Modeling
,
Hydrogen
CO2 Separation From Combined Cycles Using Molten Carbonate Fuel Cells
J. Fuel Cell Sci. Technol. February 2012, 9(1): 011018.
doi: https://doi.org/10.1115/1.4005125
HeteroFoaMs: Electrode Modeling in Nanostructured Heterogeneous Materials for Energy Systems
J. Fuel Cell Sci. Technol. February 2012, 9(1): 011019.
doi: https://doi.org/10.1115/1.4005142
Technical Briefs
Maximizing the Use of Platinum Catalyst by Ultrasonic Spray Application
J. Fuel Cell Sci. Technol. February 2012, 9(1): 014501.
doi: https://doi.org/10.1115/1.4004462
Topics:
Carbon
,
Catalysts
,
Coating processes
,
Coatings
,
Fuel cells
,
Platinum
,
Platinum catalysts
,
Sprays
,
Inks
,
Membranes
Design Innovation
Vapor Delivery Systems for the Study of the Effects of Reformate Gas Impurities in HT-PEM Fuel Cells
J. Fuel Cell Sci. Technol. February 2012, 9(1): 015001.
doi: https://doi.org/10.1115/1.4005123
Topics:
Flow (Dynamics)
,
Fuel cells
,
Temperature
,
Vapors
,
Proton exchange membrane fuel cells
,
Methanol
,
Anodes
Errata
Errata: “Mathematical Model of a Direct Methanol Fuel Cell” [J. Fuel Cell Sci. Tech. 1 (1), pp. 43–48 (2004)]
J. Fuel Cell Sci. Technol. February 2012, 9(1): 017001.
doi: https://doi.org/10.1115/1.4003995
Email alerts
RSS Feeds
State of health estimation method for Lithium-ion batteries based on multi-feature fusion and BO-BiGRU model
J. Electrochem. En. Conv. Stor
A Fault Diagnosis Method for Electric Vehicle Lithium Power Batteries Based on Dual-Feature Extraction From the Time and Frequency Domains
J. Electrochem. En. Conv. Stor (August 2025)
Optimization of thermal non-uniformity challenges in liquid-cooled lithium-ion battery packs using NSGA-II
J. Electrochem. En. Conv. Stor
Ultrasound-enabled adaptive protocol for fast charging of lithium-ion batteries
J. Electrochem. En. Conv. Stor
Effects of Sintering Temperature on the Electrical Performance of Ce0.8Sm0.2O1.9–Pr2NiO4 Composite Electrolyte for SOFCs
J. Electrochem. En. Conv. Stor (August 2025)