The contact of regular patterned rough surface in magnetic recording was analyzed to predict the contact area, meniscus force and permissible load under thin-film lubricated conditions. The contact area, the meniscus force, and the permissible load at the magnetic head-disk interface were studied as a function of the shape, size and the occupation of asperities. Optimum design criteria for both constant occupation and nonconstant occupation of identical asperities were developed to design future magnetic head and disk surfaces.
Issue Section:
Technical Papers
Topics:
Magnetic recording,
Surface roughness,
Design,
Disks,
Stress,
Magnetic heads,
Shapes,
Thin films
1.
Bhushan, B., 1990, Tribology and Mechanics of Magnetic Storage Devices, Springer-Verlag, New York.
2.
Bhushan
B.
1993
, “Magnetic Slider/Rigid Disk Substrate Materials and Disk Texturing Techniques—Status and Future Outlook
,” Adv. Info. Storage Syst.
, Vol. 5
, pp. 175
–209
.3.
Bhushan, B., Yang, L., Gao, C., Suri, S., Miller, R. A., and Marchon, B., “Friction and Wear Studies of Magnetic Thin-Film Rigid Disks with Glass-Ceramic, Glass and Aluminum-Magnesium Substrates,” Wear, Submitted for publication.
4.
Bowden, F. P., and Tabor, D., 1950, The Friction and Lubrication of Solids, Clarendon Press, Oxford, UK.
5.
Gao, C., Tian, X., and Bhushan, B., 1995, “A Meniscus Model for Optimization of Texturing and Liquid Lubrication of Magnetic Thin-Film Rigid Disks,” Trib. Trans.(in press).
6.
Israelachvili, J. N., 1992, Intermolecular and Surface Forces, Academic Press, 2nd ed., San Diego.
7.
Johnson, K. L., 1985, Contact Mechanics, Cambridge University Press, UK.
8.
Shigley, J. E., 1972, Mechanical Engineering Design, 2nd ed., McGraw-Hill, New York.
9.
Tabor, D., 1951, Hardness of Metals, Oxford University Press, UK.
10.
Tanaka
H.
Sugimoto
H.
Gomi
K.
1991
, “Friction of Magnetic Rigid Disks with Well-Defined Surface Texture
,” Adv. Info. Storage Syst.
, Vol. 3
, pp. 107
–116
.11.
Tanaka
H.
Ishikawa
F.
Gomi
K.
Yamaguchi
N.
Miyake
Y.
1994
, “Tribological Behavior of Thin Film Rigid Disks with Regular Dot Array Texture on Carbon Overcoats
,” IEEE Trans. Magn.
, Vol. 30
, pp. 4113
–4115
.
This content is only available via PDF.
Copyright © 1995
by The American Society of Mechanical Engineers
You do not currently have access to this content.