A unified viscoplastic constitutive law, the Anand model, was applied to represent the inelastic deformation behavior for solders used in electronic packaging. The material parameters of the constitutive relations for 62Sn36Pb2Ag, 60Sn40Pb, 96.5Sn3.5Ag, and 97.5Pb2.5Sn solders were determined from separated constitutive relations and experimental results. The achieved unified Anand model for solders were tested for constant strain rate testing, steady-state plastic flow and stress/strain responses under cyclic loading. It is concluded that the Anand model can be applied for representing the inelastic deformation behavior of solders at high homologous temperature and can be recommended for finite element simulation of the stress/strain responses of solder joints in service.
Issue Section:
Technical Papers
1.
Darveaux
, R.
, and Banerji
, K.
, 1992
, “Constitutive Relations for Tin-Based Solder Joints
,” IEEE Trans. CHMT
,15
, No. 6
, pp. 1013
–1024
.2.
Weinbel
, R. C.
, Tien
, J. K.
, Pollak
, P. A.
, and Kang
, S. K.
, 1987
, “Creep Fatigue Interaction in Eutectic Lead-Tin Solder Alloys
,” J. Mater. Sci. Lett.
, 6
, pp. 3091
–3096
.3.
Kashyap
, B. P.
, and Murty
, G. S.
, 1981
, “Experimental Constitutive Relations for the High Temperature Deformation of a Pb-Sn Eutectic Alloy
,” Mater. Sci. Eng.
, 50
, pp. 205
–213
.4.
Lau, J., and Rice, J. R., 1990, “Thermal Stress/Strain Analyses of Ceramic Quad Flat Pack Packages and Interconnections,” Proc. Elect. Components and Technology 40th Conf., Las Vegas, Nevada, Vol. 1, pp. 824–834.
5.
Sarihan
, V.
, 1993
, “Temperature Dependent Viscoplastic Simulation of Controlled Collapse Solder Joint Under Thermal Cycling
,” ASME J. Electron. Packag.
, 115
, pp. 16
–21
.6.
Pao
, Y. H.
, Badgley
, S.
, Jih
, E.
, Govila
, R.
, and Browning
, J.
, 1993
, “Constitutive Behavior and Low Cycle Thermal Fatigue of 97Sn3Cu Solder Joints
,” ASME J. Electron. Packag.
, 115
, No. 6
, pp. 147
–152
.7.
Knecht
, S.
, and Fox
, L. R.
, 1990
, “Constitutive Relation and Creep-Fatigue Life Model for Tin-lead Solder
,” IEEE Trans. CHMT
, 13
,, No. 2, pp. 424
–433
.8.
Busso
, E. P.
, Kitano
, M.
, and Kumazawa
, T.
, 1994
, “Modeling Complex Inelastic Deformation Processes in IC Packages’ Solder Joints
,” ASME J. Electron. Packag.
, 116
, No. 3
, pp. 6
–15
.9.
Busso
, E. P.
, and Kitano
, M.
, 1992
, “A Visco-Plastic Constitutive Model for 60/40 Tin-Lead Solder Used in IC Package Joints
,” ASME J. Eng. Mater. Technol.
, 114
, pp. 331
–337
.10.
Qian, Z., and Liu, S., 1997, “A Unified Viscoplastic Constitutive Model for Tin-Lead Solder Joints,” Advances in Electronic Packaging, ASME EEP-Vol. 19-2, pp. 1599–1604.
11.
Skipor
, A. F.
, et al., 1996
, “On the Constitutive Response of 63/37 Sn/Pb Eutectic Solder
,” ASME J. Eng. Mater. Technol.
, 118
, pp. 1
–11
.12.
Ma
, X.
, Wang
, L.
, Fang
, H. Y.
, and Qian
, Y. Y.
, 1998
, “Bodner-Partom Constitutive Relations for Eutectic Tin-Lead Solder
,” Chinese J. Applied Mechanics
,15
, No. 2
, pp. 87
–90
(in Chinese).13.
Weber
, G. G.
, Lush
, A. M.
, Zavaliangos
, A.
, and Anand
, L.
, 1991
, “An Objective Time-Integration Procedure for Isotropic Rate-Independent and Rate-Dependent Elastic-Plastic Constitutive Equations
,” Int. J. Plast.
, 6
, pp. 701
–744
.14.
Anand
, L.
, 1985
, “Constitutive Equations for Hot Working of Metals
,” J. Plasticity
, 1
, pp. 213
–231
.15.
Brown
, S. B.
, Kim
, K. H.
, and Anand
, L.
, 1989
, “An Internal Variable Constitutive Model for Hot Working of Metals
,” Int. J. Plast.
, 5
, pp. 95
–130
.16.
Garofalo
, F.
, 1963
, “An Empirical Relation Defining the Stress Dependence of Minimum Creep Rate in Metals
,” Trans. AIME
, 227
, 351
–362
.17.
Arrowood, R., Mukherjee, A., and Jones, W. B., 1991, “Hot Deformation of Two-Phase Mixtures,” Solder Mechanics: A State of the Art Assessment. Frear, D. R., Jones, W. B., and Kinsman, K. R., eds., TMS, Warrendale, pp. 107–153.
18.
Grivas
, D.
, Murty
, K. I.
, and Morris
, J. W.
, 1979
, “Deformation of Pb/Sn Eutectic Alloys at Relatively High Strain Rates
,” Acta Metall.
27
, pp. 731
–737
.19.
Solomon
, H. D.
, 1986
, “Creep, Strain-Rate Sensitivity and Low Cycle Fatigue of 60/40 Solder
,” Brazing and Soldering
, 11
, pp. 68
–75
.20.
Holden
, S. J.
, and Wallace
, E. R.
, 1999
, “Modeling the Effects of Microstructure in BGA Joints
,” Int. J. Microcircuits Electron. Packag., Second Quarter
, 22
, No. 2
, pp. 80
–85
.21.
Wang
, J.
, Qian
, Z.
, Zou
, D.
, and Liu
, S.
, 1998
, “Creep Behavior of a Flip-Chip Package by Both FEM Modeling and Real Time Moire Interferometry
,” ASME J. Electron. Packag.
, 120
, pp. 179
–185
.22.
Hong
, B. Z.
, and Burrell
, L. G.
, 1997
, “Model Thermally Induced Viscoplastic Deformation and Low Cycle Fatigue of CBGA Solder Joints in a Surface Mount Package
, IEEE Trans. CPMT-Part A
, 20
, No. 3
, pp. 280
–285
.23.
Wiese, S., Feustel, F., Rzapka, S., and Meusel, E., 1998, “`Experimental Characterization of Material Properties of 63Sn36Pb Flip Chip Solder Joints, Proc. Mat. Res. Soc. Symp., Vol. 515, pp. 233–238.
24.
Fusaro
, J. M.
, and Darveaux
, R.
, 1997
, “Reliability of Copper Base-plate High Current Power Modules,”
, Int. J. Microcircuits Electron. Packag., Second Quarter
, 20
, No. 2
, pp. 81
–88
.25.
Pao, Y. H., Jih, E., Badgley, S., and Browning, J., 1992, “Thermal Cyclic Behavior of 97Sn-3Cu Solder Joints,” ASME 92-WA/EEP-21, pp. 1–6.
26.
Wilde, J., Cheng, Z. N., and Wang. G. Z., 1999, “Influences of Packaging Materials on the Solder Joints Reliability of Chip Scale Assemblies,” Proc. 1999 Inter. Symp. on Advan. Packag. Mater., (Braselton, Georgia), pp. 141–149.
27.
Pao
, Y. H.
, Badgley
, S.
, Govila
, R.
, Baumgartner
, L.
, Allor
, R.
, and Cooper
, R.
, 1992
, “Measurements of Mechanical Behavior of High Lead Lead-Tin Solder Joints Subjected to Thermal Cycling
,” ASME J. Electron. Packag.
, 114
, pp. 135
–145
.Copyright © 2001
by ASME
You do not currently have access to this content.
