We present a method for multi-parameter sensing in the application of thermal vector flow sensors. The method is based on the property that two independent signals can be obtained from a single sensing element, viz. a thermal vector flow sensor. For particular applications, this reduces the number of sensors in the measurement process. It may also allow redundant measurement of physical parameters, such as temperature; these redundant measurements are important for self-diagnostics of proper operation of a measurement system. The method is applied to a bidirectional silicon flow sensor, that generates two independent signals, both being a function of the Re number and the fluid temperature. This allows both temperature and mass flow measurement by use of a single sensor. Temperature estimates are accurate within 0.64 K and mass flow estimates within 5.6%.
Issue Section:
Technical Papers
1.
Mettlen, D., Mu¨ller, A. (ed)., 1988, Discharge and Velocity Measurement, Balkema, Rotterdam.
2.
Sydenham, P. H. (ed.), 1983, Handbook of Measurement Science, Vol 2, Practical Fundamentals, Wiley, New York.
3.
Meijer, G. C. M. and Herwaarden, A. W. (eds.), 1994, Thermal Sensors, IOP Publishing, London.
4.
Go¨pel, W., Hesse, J., and Zemel, J. N. (eds.), 1990, Sensors: A Comprehensive Survey, Vol. 4, Thermal Sensors, VCH Verlagsgesellschaft GmbH, Weinheim.
5.
Van Putten, A. F. P., 1988, Integrated Silicon Anemometers, PhD thesis, Katholieke Universiteit Leuven, Belgium.
6.
Van Oudheusden, B., 1989, Integrated Silicon Flow Sensors, PhD thesis, Delft University of Technology, The Netherlands.
7.
Sze, S. M. (ed.), 1994, Semiconductor Sensors, Wiley, New York.
8.
Verhoeven, H.-J, 1995, Smart Thermal Flow Sensors, PhD thesis, Delft University of Technology, The Netherlands.
9.
Van Putten
, M. J. A. M.
, Van Putten
, M. H. P. M.
, and Van Putten
, A. F. P.
, 1994
, “Full Additive Drift Elimination Using the Alternating Direction Method
,” Sens. Actuators
, 44
, pp. 13
–17
.10.
Van Putten, M. H. P. M., Van Putten, M. J. A. M., Van Putten, A. F. P. and Van Putten, P. F. A. M., 1995, “Method for Drift Elimination in Sensors,” USA patent 5426969 and European patent application 94202293.0.
11.
www.vpinstruments.com.
12.
Van Putten
, A. F. P.
, 1980
, “Thermal Feedback Drives Sensor Bridge Simultaneously with Constant Supply Voltage and Current
,” IEEE Trans. Instrum. Meas.
, 39
, pp. 48
–51
.13.
Van Putten
, A. F. P.
, and Middelhoek
, S.
, 1974
, “An Integrated Silicon Anemometer
,” Electron. Lett.
, 10
(21
), pp. 425
–426
.14.
Van Putten
, A. F. P.
, 1990
, “Thermal Feedback Drives Sensor Bridge Simultaneously with Constant Supply Voltage and Current
,” IEEE Trans. Instrum. Meas.
, 39
, pp. 48
–51
.15.
Churchill
, S. W.
, 1977
, “A Comprehensive Correlating Equation for Laminar Assisting Forced and Free Convection
,” AIChE J.
, 23
(1
), pp. 10
–16
.16.
Chen
, T. S.
, Armaly
, B. F.
, and Ramachandran
, N.
, 1986
, “Correlations for Laminar Mixed Convection Flows on Vertical, Inclined and Horizontal Flat Plates
,” ASME J. Heat Transfer
, 108
, pp. 835
–840
.17.
Bird, R. B., Stewart, W. E. and Lightfoot, E. N., 1994, Transport Phenomena, Wiley, New York.
18.
Van Putten, M. J. A. M., 2000, “Flow Measurements with Thermal Silicon Sensors,” PhD thesis, Delft University of Technology, The Netherlands.
19.
Van Putten
, M. J. A. M.
, and Van Putten
, M. H. P. M.
, 2001
, “Facing Drift: A Comparison of Three Methods
,” Sens. Actuators
, 90
, pp. 172
–180
.20.
Van Putten
, M. J. A. M.
, Van Putten
, M. H. P. M.
, and Van Putten
, A. F. P.
, 1999
, “Flow Measurements at Gr/Re2≫1 with Silicon Thermal Anemometry
,” IEEE Trans. Instrum. Meas.
, 48
(3
), pp. 724
–729
.21.
Van Putten
, M. J. A. M.
, Kleijn
, C. R.
, and Van den Akker
, H. E. A.
, 2001
, “Heat Transfer and Temporal Behavior of the Laminar Mixed-Convection Flow Around a Ducted Flat-Plate Thermal Flow Sensor
,” Exp. Heat Transfer
, 14
, pp. 229
–250
.22.
Johnson
, R. G.
, and Higashi
, R. E.
, 1987
, “A Highly Sensitive Silicon Chip Microtransducer for Air Flow and Differential Pressure Sensing Applications
,” Sens. Actuators
, 11
, pp. 63
–72
.23.
Robadey
, J.
, Paul
, O.
, and Baltes
, H.
, 1995
, “Two-Dimensional Integrated Gas Flow Sensors by CMOS IC Technology
,” J. Micromech. Microeng.
, 5
(3
), pp. 243
–250
.24.
Van Putten
, M. J. A. M.
, Van Putten
, M. H. P. M.
, Van Putten
, A. F. P.
, Pompe
, J. C.
, and Bruining
, H. A.
, 1997, “A Silicon Bidirectional Flow Sensor for Measuring Respiratory Flow,” IEEE Trans. Biomed. Eng., 205–208.25.
Toda
, K.
, Sanemasa
, I.
, and Ishikawa
, K.
, 1996
, “Simple Temperature Compensation of Thermal Air-Flow Sensor
,” Sens. Actuators
, A57
, pp. 197
–201
.Copyright © 2002
by ASME
You do not currently have access to this content.
