In the work of Fischer et al. (2002, “Forces on Particles in an Oscillatory Boundary Layer,” J. Fluid Mech., 468, pp. 327–347, 2005; “Influence of Wall Proximity on the Lift and Drag of a Particle in an Oscillatory Flow,” ASME J. Fluids Eng., 127, pp. 583–594) we computed the lift and drag forces on a sphere, subjected to a wall-bounded oscillatory flow. The forces were found as a function of the Reynolds number, the forcing frequency, and the gap between the particle and the ideally smooth rigid bounding wall. Here we investigate how the forces change as a function of the above parameters and its moment of inertia if the particle is allowed to freely rotate. Allowing the particle to rotate does not change appreciably the drag force, as compared to the drag experienced by the particle when it is held fixed. Lift differences between the rotating and nonrotating cases are shown to be primarily dominated in the mean by the pressure component. The lift of the rotating particle varies significantly from the fixed-particle case and depends strongly on the Reynolds number, the forcing frequency, and the gap; much less so on the moment of inertia. Of special significance is that the lift is enhanced for small Reynolds numbers and suppressed for larger ones, with a clear transition point. We also examine how the torque changes when the particle is allowed to rotate as compared to when it is held fixed. As a function of the Reynolds number the torque of the fixed sphere is monotonically decreasing in the range $Re=5$ to $Re=400$. The rotating-sphere counterpart experiences a smaller and more complex torque, synchronized with the lift transition mentioned before. As a function of the gap, the torque is significantly larger in the fixed particle case.

Skip Nav Destination

Article navigation

October 2008

Research Papers

# Influence of Torque on the Lift and Drag of a Particle in an Oscillatory Flow

Paul F. Fischer,

Paul F. Fischer

Mathematics and Computer Science Division,

Argonne National Laboratory

, Argonne, IL 60439
Search for other works by this author on:

Gary K. Leaf,

Gary K. Leaf

Mathematics and Computer Science Division,

Argonne National Laboratory

, Argonne, IL 60439
Search for other works by this author on:

Juan M. Restrepo

Juan M. Restrepo

Department of Mathematics, and Physics Department,

University of Arizona

, Tucson, AZ 85721
Search for other works by this author on:

Paul F. Fischer

Mathematics and Computer Science Division,

Argonne National Laboratory

, Argonne, IL 60439
Gary K. Leaf

Mathematics and Computer Science Division,

Argonne National Laboratory

, Argonne, IL 60439
Juan M. Restrepo

Department of Mathematics, and Physics Department,

University of Arizona

, Tucson, AZ 85721*J. Fluids Eng*. Oct 2008, 130(10): 101303 (9 pages)

**Published Online:**September 4, 2008

Article history

Received:

October 21, 2007

Revised:

June 5, 2008

Published:

September 4, 2008

Citation

Fischer, P. F., Leaf, G. K., and Restrepo, J. M. (September 4, 2008). "Influence of Torque on the Lift and Drag of a Particle in an Oscillatory Flow." ASME. *J. Fluids Eng*. October 2008; 130(10): 101303. https://doi.org/10.1115/1.2969456

Download citation file:

### Get Email Alerts

### Cited By

Effect of Power-Law Fluids Flow Structures on Germicides Disinfection Through Taylor–Couette Configuration

J. Fluids Eng (March 2024)

A Method to Determine Bubble Distribution in Liquid Using Data of Inverse Acoustical Scattering

J. Fluids Eng (March 2024)

### Related Articles

Flow Past a Sphere With Surface Blowing and Suction

J. Fluids Eng (December,2007)

Freeman Scholar Review: Passive and Active Skin-Friction Drag Reduction in Turbulent Boundary Layers

J. Fluids Eng (September,2016)

Drag Coefficients of Viscous Spheres at Intermediate and High Reynolds Numbers

J. Fluids Eng (December,2001)

Forcing Boundary-Layer Transition on a Single-Element Wing in Ground Effect

J. Fluids Eng (October,2017)

### Related Proceedings Papers

### Related Chapters

Vortex-Induced Vibration

Flow Induced Vibration of Power and Process Plant Components: A Practical Workbook

Cavitating Structures at Inception in Turbulent Shear Flow

Proceedings of the 10th International Symposium on Cavitation (CAV2018)

A Computational Framework for Antibiofouling System Design

Advances in Computers and Information in Engineering Research, Volume 2