Skip Nav Destination
Issues
August 1935
This article was originally published in
Transactions of the American Society of Mechanical Engineers
ISSN 0097-6822
In this Issue
Research Papers
Photoflow Method of Water Measurement
Trans. ASME. August 1935, 57(6): 273–280.
doi: https://doi.org/10.1115/1.4020010
Topics:
Water
,
Flow (Dynamics)
,
Errors
,
Pressure
,
Flowmeters
,
Instrumentation
,
Photography
Pitot-Tube Practice
Trans. ASME. August 1935, 57(6): 281–294.
doi: https://doi.org/10.1115/1.4020011
Topics:
Flowmeters
,
Flow (Dynamics)
,
Pipelines
,
Pipes
,
Cycles
,
Water
,
Calibration
,
Design
,
Errors
,
Flow measurement
Research Investigation of Current-Meter Behavior in Flowing Water
Trans. ASME. August 1935, 57(6): 295–301.
doi: https://doi.org/10.1115/1.4020012
Topics:
Construction
,
Flow (Dynamics)
,
Flow measurement
,
Flowmeters
,
Flumes
,
Water
Water Gaging for Low-Head Units of High Capacity
Trans. ASME. August 1935, 57(6): 303–316.
doi: https://doi.org/10.1115/1.4020013
Topics:
Gages
,
Water
,
Testing
,
Engineers
,
Flow (Dynamics)
,
Atlantic Ocean
,
Design
,
Flow measurement
,
Hydroelectric construction
,
Preferences
Draft-Gear Action in Long Trains
Trans. ASME. August 1935, 57(6): 317–334.
doi: https://doi.org/10.1115/1.4020014
Topics:
Gears
,
Trains
,
Design
,
Freight cars
,
Particulate matter
,
Pressure
,
Waves
Locomotive Tractive Effort in Relation to Speed and Steam Supply
Trans. ASME. August 1935, 57(6): 335–341.
doi: https://doi.org/10.1115/1.4020015
Topics:
Locomotives
,
Steam
,
Horsepower
,
Boilers
,
Cylinders
,
Economics
,
Pressure
,
Weight (Mass)
Discussions and Closures
Discussion: “The Design and Performance of an Axial-Flow Fan” (Marks, Lionel S., and Weske, John R., 1934, Trans. ASME, 56, pp. 807–813)
Trans. ASME. August 1935, 57(6): 343–344.
doi: https://doi.org/10.1115/1.4020016
Topics:
Axial flow
,
Design
Discussion: “The Design and Performance of an Axial-Flow Fan” (Marks, Lionel S., and Weske, John R., 1934, Trans. ASME, 56, pp. 807–813)
Trans. ASME. August 1935, 57(6): 344–345.
doi: https://doi.org/10.1115/1.4020017
Topics:
Axial flow
,
Design
Discussion: “The Design and Performance of an Axial-Flow Fan” (Marks, Lionel S., and Weske, John R., 1934, Trans. ASME, 56, pp. 807–813)
Trans. ASME. August 1935, 57(6): 345–346.
doi: https://doi.org/10.1115/1.4020018
Topics:
Axial flow
,
Design
Closure to “Discussions of ‘The Design and Performance of an Axial-Flow Fan’” (1935, Trans. ASME, 57, pp. 343–346)
Trans. ASME. August 1935, 57(6): 346.
doi: https://doi.org/10.1115/1.4020019
Topics:
Axial flow
,
Design
Discussion: “Air Flow in Fan-Discharge Ducts” (Marks, L. S., 1934, Trans. ASME, 56, pp. 871–878)
Trans. ASME. August 1935, 57(6): 346–347.
doi: https://doi.org/10.1115/1.4020020
Discussion: “Air Flow in Fan-Discharge Ducts” (Marks, L. S., 1934, Trans. ASME, 56, pp. 871–878)
Trans. ASME. August 1935, 57(6): 347.
doi: https://doi.org/10.1115/1.4020021
Discussion: “Air Flow in Fan-Discharge Ducts” (Marks, L. S., 1934, Trans. ASME, 56, pp. 871–878)
Trans. ASME. August 1935, 57(6): 347–348.
doi: https://doi.org/10.1115/1.4020022
Discussion: “Air Flow in Fan-Discharge Ducts” (Marks, L. S., 1934, Trans. ASME, 56, pp. 871–878)
Trans. ASME. August 1935, 57(6): 348–349.
doi: https://doi.org/10.1115/1.4020023
Discussion: “Air Flow in Fan-Discharge Ducts” (Marks, L. S., 1934, Trans. ASME, 56, pp. 871–878)
Trans. ASME. August 1935, 57(6): 349.
doi: https://doi.org/10.1115/1.4020024
Discussion: “Air Flow in Fan-Discharge Ducts” (Marks, L. S., 1934, Trans. ASME, 56, pp. 871–878)
Trans. ASME. August 1935, 57(6): 349.
doi: https://doi.org/10.1115/1.4020025
Discussion: “Air Flow in Fan-Discharge Ducts” (Marks, L. S., 1934, Trans. ASME, 56, pp. 871–878)
Trans. ASME. August 1935, 57(6): 350.
doi: https://doi.org/10.1115/1.4020026
Closure to “Discussions of ‘Air Flow in Fan-Discharge Ducts’” (1935, Trans. ASME, 57, pp. 346–350)
Trans. ASME. August 1935, 57(6): 350–351.
doi: https://doi.org/10.1115/1.4020027
Topics:
Air flow
Discussion: “The Economics of Preheated Air for Stokers” (Dillon, R. E., and Engle, M. D., 1934, Trans. ASME, 56, pp. 879–884)
Trans. ASME. August 1935, 57(6): 351–352.
doi: https://doi.org/10.1115/1.4020028
Topics:
Economics
Discussion: “The Economics of Preheated Air for Stokers” (Dillon, R. E., and Engle, M. D., 1934, Trans. ASME, 56, pp. 879–884)
Trans. ASME. August 1935, 57(6): 352–353.
doi: https://doi.org/10.1115/1.4020029
Topics:
Economics
Discussion: “The Economics of Preheated Air for Stokers” (Dillon, R. E., and Engle, M. D., 1934, Trans. ASME, 56, pp. 879–884)
Trans. ASME. August 1935, 57(6): 353.
doi: https://doi.org/10.1115/1.4020030
Topics:
Economics
Discussion: “The Economics of Preheated Air for Stokers” (Dillon, R. E., and Engle, M. D., 1934, Trans. ASME, 56, pp. 879–884)
Trans. ASME. August 1935, 57(6): 353.
doi: https://doi.org/10.1115/1.4020031
Topics:
Economics
Discussion: “The Economics of Preheated Air for Stokers” (Dillon, R. E., and Engle, M. D., 1934, Trans. ASME, 56, pp. 879–884)
Trans. ASME. August 1935, 57(6): 353–354.
doi: https://doi.org/10.1115/1.4020032
Topics:
Economics
Discussion: “The Economics of Preheated Air for Stokers” (Dillon, R. E., and Engle, M. D., 1934, Trans. ASME, 56, pp. 879–884)
Trans. ASME. August 1935, 57(6): 354.
doi: https://doi.org/10.1115/1.4020033
Topics:
Economics
Discussion: “The Economics of Preheated Air for Stokers” (Dillon, R. E., and Engle, M. D., 1934, Trans. ASME, 56, pp. 879–884)
Trans. ASME. August 1935, 57(6): 354.
doi: https://doi.org/10.1115/1.4020034
Topics:
Economics
Discussion: “The Economics of Preheated Air for Stokers” (Dillon, R. E., and Engle, M. D., 1934, Trans. ASME, 56, pp. 879–884)
Trans. ASME. August 1935, 57(6): 354.
doi: https://doi.org/10.1115/1.4020035
Topics:
Economics
Discussion: “The Economics of Preheated Air for Stokers” (Dillon, R. E., and Engle, M. D., 1934, Trans. ASME, 56, pp. 879–884)
Trans. ASME. August 1935, 57(6): 355.
doi: https://doi.org/10.1115/1.4020036
Topics:
Economics
Discussion: “The Economics of Preheated Air for Stokers” (Dillon, R. E., and Engle, M. D., 1934, Trans. ASME, 56, pp. 879–884)
Trans. ASME. August 1935, 57(6): 355.
doi: https://doi.org/10.1115/1.4020037
Topics:
Economics
Discussion: “Current Practice in Pressures, Speeds, Clearances, and Lubrication of Oil-Film Bearings” (Howarth, H. A. S., 1934, Trans. ASME, 56, pp. 891–902)
Trans. ASME. August 1935, 57(6): 355.
doi: https://doi.org/10.1115/1.4020038
Topics:
Bearings
,
Lubrication
Discussion: “Current Practice in Pressures, Speeds, Clearances, and Lubrication of Oil-Film Bearings” (Howarth, H. A. S., 1934, Trans. ASME, 56, pp. 891–902)
Trans. ASME. August 1935, 57(6): 355–356.
doi: https://doi.org/10.1115/1.4020039
Topics:
Bearings
,
Lubrication
Discussion: “Current Practice in Pressures, Speeds, Clearances, and Lubrication of Oil-Film Bearings” (Howarth, H. A. S., 1934, Trans. ASME, 56, pp. 891–902)
Trans. ASME. August 1935, 57(6): 356–357.
doi: https://doi.org/10.1115/1.4020040
Topics:
Bearings
,
Lubrication
Discussion: “Current Practice in Pressures, Speeds, Clearances, and Lubrication of Oil-Film Bearings” (Howarth, H. A. S., 1934, Trans. ASME, 56, pp. 891–902)
Trans. ASME. August 1935, 57(6): 357.
doi: https://doi.org/10.1115/1.4020041
Topics:
Bearings
,
Lubrication
Discussion: “Current Practice in Pressures, Speeds, Clearances, and Lubrication of Oil-Film Bearings” (Howarth, H. A. S., 1934, Trans. ASME, 56, pp. 891–902)
Trans. ASME. August 1935, 57(6): 357–358.
doi: https://doi.org/10.1115/1.4020042
Topics:
Bearings
,
Lubrication
Discussion: “Current Practice in Pressures, Speeds, Clearances, and Lubrication of Oil-Film Bearings” (Howarth, H. A. S., 1934, Trans. ASME, 56, pp. 891–902)
Trans. ASME. August 1935, 57(6): 358–359.
doi: https://doi.org/10.1115/1.4020043
Topics:
Bearings
,
Lubrication
Discussion: “Current Practice in Pressures, Speeds, Clearances, and Lubrication of Oil-Film Bearings” (Howarth, H. A. S., 1934, Trans. ASME, 56, pp. 891–902)
Trans. ASME. August 1935, 57(6): 359.
doi: https://doi.org/10.1115/1.4020044
Topics:
Bearings
,
Lubrication
Discussion: “Current Practice in Pressures, Speeds, Clearances, and Lubrication of Oil-Film Bearings” (Howarth, H. A. S., 1934, Trans. ASME, 56, pp. 891–902)
Trans. ASME. August 1935, 57(6): 359–360.
doi: https://doi.org/10.1115/1.4020045
Topics:
Bearings
,
Lubrication
Discussion: “Current Practice in Pressures, Speeds, Clearances, and Lubrication of Oil-Film Bearings” (Howarth, H. A. S., 1934, Trans. ASME, 56, pp. 891–902)
Trans. ASME. August 1935, 57(6): 360.
doi: https://doi.org/10.1115/1.4020046
Topics:
Bearings
,
Lubrication
Closure to “Discussions of ‘Current Practice in Pressures, Speeds, Clearances, and Lubrication of Oil-Film Bearings’” (1935, Trans. ASME, 57, pp. 355–360)
Trans. ASME. August 1935, 57(6): 360–362.
doi: https://doi.org/10.1115/1.4020047
Topics:
Lubrication
Discussion: “Tractive Effort of Steam Locomotives (Locomotive Ratios—II)” (Lipetz, A. I., 1934, Trans. ASME, 56, pp. 923–933)
Trans. ASME. August 1935, 57(6): 362–364.
doi: https://doi.org/10.1115/1.4020048
Topics:
Locomotives
,
Steam
Discussion: “Tractive Effort of Steam Locomotives (Locomotive Ratios—II)” (Lipetz, A. I., 1934, Trans. ASME, 56, pp. 923–933)
Trans. ASME. August 1935, 57(6): 364–366.
doi: https://doi.org/10.1115/1.4020049
Topics:
Locomotives
,
Steam
Discussion: “Tractive Effort of Steam Locomotives (Locomotive Ratios—II)” (Lipetz, A. I., 1934, Trans. ASME, 56, pp. 923–933)
Trans. ASME. August 1935, 57(6): 366.
doi: https://doi.org/10.1115/1.4020050
Topics:
Locomotives
,
Steam
Discussion: “Tractive Effort of Steam Locomotives (Locomotive Ratios—II)” (Lipetz, A. I., 1934, Trans. ASME, 56, pp. 923–933)
Trans. ASME. August 1935, 57(6): 366–367.
doi: https://doi.org/10.1115/1.4020051
Topics:
Locomotives
,
Steam
Discussion: “Tractive Effort of Steam Locomotives (Locomotive Ratios—II)” (Lipetz, A. I., 1934, Trans. ASME, 56, pp. 923–933)
Trans. ASME. August 1935, 57(6): 367–368.
doi: https://doi.org/10.1115/1.4020052
Topics:
Locomotives
,
Steam
Closure to “Discussions of ‘Tractive Effort of Steam Locomotives (Locomotive Ratios—II)’” (1935, Trans. ASME, 57, pp. 362–368)
Trans. ASME. August 1935, 57(6): 368–374.
doi: https://doi.org/10.1115/1.4020053
Topics:
Locomotives
,
Steam
Discussion: “The Intake Orifice and a Proposed Method for Testing Exhaust Fans” (Ebaugh, N. C., and Whitfield, R., 1934, Trans. ASME, 56, pp. 903–911)
Trans. ASME. August 1935, 57(6): 374.
doi: https://doi.org/10.1115/1.4020054
Topics:
Exhaust systems
,
Fans
,
Testing
Closure to “Discussion of ‘The Intake Orifice and a Proposed Method for Testing Exhaust Fans’” (1935, Trans. ASME, 57, p. 374)
Trans. ASME. August 1935, 57(6): 374.
doi: https://doi.org/10.1115/1.4020055
Topics:
Exhaust systems
,
Testing
Discussion: “Pulverized Fuel-Burning Experiences at Buzzard Point Station” (Thielscher, H. G., 1934, Trans. ASME, 56, pp. 885–890)
Trans. ASME. August 1935, 57(6): 374–375.
doi: https://doi.org/10.1115/1.4020056
Topics:
Combustion
,
Fuels
Discussion: “Pulverized Fuel-Burning Experiences at Buzzard Point Station” (Thielscher, H. G., 1934, Trans. ASME, 56, pp. 885–890)
Trans. ASME. August 1935, 57(6): 375.
doi: https://doi.org/10.1115/1.4020057
Topics:
Combustion
,
Fuels
Discussion: “Pulverized Fuel-Burning Experiences at Buzzard Point Station” (Thielscher, H. G., 1934, Trans. ASME, 56, pp. 885–890)
Trans. ASME. August 1935, 57(6): 375–376.
doi: https://doi.org/10.1115/1.4020058
Topics:
Combustion
,
Fuels
Discussion: “Pulverized Fuel-Burning Experiences at Buzzard Point Station” (Thielscher, H. G., 1934, Trans. ASME, 56, pp. 885–890)
Trans. ASME. August 1935, 57(6): 376.
doi: https://doi.org/10.1115/1.4020059
Topics:
Combustion
,
Fuels
Discussion: “Ten Years of Stoker Development at Hudson Avenue” (Driscoll, J. M., and Sperr, W. H., 1935, Trans. ASME, 57, pp. 49–58)
Trans. ASME. August 1935, 57(6): 376–377.
doi: https://doi.org/10.1115/1.4020060
Discussion: “Ten Years of Stoker Development at Hudson Avenue” (Driscoll, J. M., and Sperr, W. H., 1935, Trans. ASME, 57, pp. 49–58)
Trans. ASME. August 1935, 57(6): 377–378.
doi: https://doi.org/10.1115/1.4020061
Discussion: “Ten Years of Stoker Development at Hudson Avenue” (Driscoll, J. M., and Sperr, W. H., 1935, Trans. ASME, 57, pp. 49–58)
Trans. ASME. August 1935, 57(6): 378.
doi: https://doi.org/10.1115/1.4020062
Discussion: “Ten Years of Stoker Development at Hudson Avenue” (Driscoll, J. M., and Sperr, W. H., 1935, Trans. ASME, 57, pp. 49–58)
Trans. ASME. August 1935, 57(6): 378.
doi: https://doi.org/10.1115/1.4020063
Discussion: “Ten Years of Stoker Development at Hudson Avenue” (Driscoll, J. M., and Sperr, W. H., 1935, Trans. ASME, 57, pp. 49–58)
Trans. ASME. August 1935, 57(6): 378–379.
doi: https://doi.org/10.1115/1.4020064
Closure to “Discussions of ‘Ten Years of Stoker Development at Hudson Avenue’” (1935, Trans. ASME, 57, pp. 376–379)
Trans. ASME. August 1935, 57(6): 379–380.
doi: https://doi.org/10.1115/1.4020065
Discussion: “A New Method of Investigating Performance of Bearing Metals” (Connelly, John R., 1935, Trans. ASME, 57, pp. 35–39)
Trans. ASME. August 1935, 57(6): 380.
doi: https://doi.org/10.1115/1.4020066
Topics:
Babbitt metal
Discussion: “A New Method of Investigating Performance of Bearing Metals” (Connelly, John R., 1935, Trans. ASME, 57, pp. 35–39)
Trans. ASME. August 1935, 57(6): 380–381.
doi: https://doi.org/10.1115/1.4020067
Topics:
Babbitt metal
Closure to “Discussions of ‘A New Method of Investigating Performance of Bearing Metals’” (1935, Trans. ASME, 57, pp. 380–381)
Trans. ASME. August 1935, 57(6): 381.
doi: https://doi.org/10.1115/1.4020068
Topics:
Bearings
Email alerts
RSS Feeds
A Wind Speed Forecasting Method Using Gaussian Process Regression Model Under Data Uncertainty
J. Fluids Eng (March 2025)
Design Process for Scaled Model Wind Turbines Using Field Measurements
J. Fluids Eng (March 2025)
