Skip Nav Destination
Issues
January 1953
This article was originally published in
Transactions of the American Society of Mechanical Engineers
ISSN 0097-6822
In this Issue
Research Papers
A Clearanceometer for Determining Blade-Tip Clearances of Axial-Flow Compressors
Trans. ASME. January 1953, 75(1): 1–5.
doi: https://doi.org/10.1115/1.4015189
Topics:
Axial flow
,
Blades
,
Compressors
,
Instrumentation
,
Circuits
,
Design
,
Probes
Fast Thermocouples as Control-System Elements Sensing Exhaust-Gas Temperatures in Aircraft Gas Turbines
Trans. ASME. January 1953, 75(1): 7–13.
doi: https://doi.org/10.1115/1.4015193
Topics:
Aircraft
,
Control systems
,
Exhaust systems
,
Gas turbines
,
Temperature
,
Thermocouples
,
Aviation
,
Construction
,
Errors
,
Heat conduction
A Study of Burner Oscillations of the Organ-Pipe Type
Trans. ASME. January 1953, 75(1): 15–26.
doi: https://doi.org/10.1115/1.4015196
Topics:
Oscillations
,
Pipes
,
Combustion
,
Pressure
,
Flames
,
Heat
,
Acoustics
,
Combustion systems
,
Diffusion flames
,
Feedback
An Energy Basis for Comparison of Performance of Combustion Chambers
Trans. ASME. January 1953, 75(1): 29–33.
doi: https://doi.org/10.1115/1.4015200
Topics:
Combustion chambers
,
Combustion
,
Pressure drop
,
Energy dissipation
,
Energy efficiency
Comparative Performance of Coals of Different Rank in a Film-Cooled Gas-Turbine Combustor
Trans. ASME. January 1953, 75(1): 35–40.
doi: https://doi.org/10.1115/1.4015203
Topics:
Coal
,
Combustion chambers
,
Gas turbines
,
Locomotives
,
ASTM International
,
Combustion
,
Fuels
A Nondimensional Correlation of Flame Propagation at Subatmospheric Pressures
Trans. ASME. January 1953, 75(1): 43–47.
doi: https://doi.org/10.1115/1.4015208
NACA Sonic-Flow-Orifice Temperature Probe in High-Gas-Temperature Measurement
Trans. ASME. January 1953, 75(1): 51–54.
doi: https://doi.org/10.1115/1.4015213
Topics:
Flow (Dynamics)
,
Probes
,
Temperature
,
Temperature measurement
,
Engines
,
Errors
,
Gases
,
Jet engines
,
Orifices
,
Sodium
Use of the Centrifugal Governor Mechanism as a Torsional Vibration Absorber
Trans. ASME. January 1953, 75(1): 59–61.
doi: https://doi.org/10.1115/1.4015218
Topics:
Governors
,
Vibration absorbers
Axial Tension and Bending Interaction Curves for Members Loaded Inelastically
Trans. ASME. January 1953, 75(1): 63–71.
doi: https://doi.org/10.1115/1.4015221
Topics:
Tension
,
Stress
,
Deflection
,
Aluminum alloys
,
Approximation
,
Buckling
,
Cross section (Physics)
,
Design
,
Rails
,
Steel
Distribution of Mechanical and Thermal Stresses in Multilayer Cylinders
Trans. ASME. January 1953, 75(1): 73–79.
doi: https://doi.org/10.1115/1.4015224
Topics:
Cylinders
,
Thermal stresses
,
Computation
,
Vessels
,
Stress
,
Stress concentration
,
Transients (Dynamics)
,
Yield point
The Stresses in a Pressure Vessel With a Hemispherical Head
Trans. ASME. January 1953, 75(1): 83–89.
doi: https://doi.org/10.1115/1.4015228
Topics:
Pressure vessels
,
Stress
,
Shells
,
Computation
,
Hoop stress
,
Junctions
,
Shear stress
Flame Velocities in Carbon Monoxide-Oxygen Mixtures
Trans. ASME. January 1953, 75(1): 91–96.
doi: https://doi.org/10.1115/1.4015231
Topics:
Carbon
,
Flames
,
Oxygen
,
Bombs
,
Bubbles
,
Combustion
,
Photography
,
Pressure
,
Rubber
,
Temperature
Operating Experiences With Mechanical Joints in High-Pressure High-Temperature Steam Piping
Trans. ASME. January 1953, 75(1): 97–101.
doi: https://doi.org/10.1115/1.4015232
Topics:
High pressure (Physics)
,
High temperature steam
,
Pipes
,
Alloy steel
,
Bellows (Equipment)
,
Pressure
,
Steam
,
Joining
,
Molybdenum
,
Steel
Relative Abrasiveness of the Cast Surfaces of Various Gray-Iron Castings on Single-Point Tools of High-Speed Steel
Trans. ASME. January 1953, 75(1): 103–107.
doi: https://doi.org/10.1115/1.4015233
Topics:
Gray iron
,
Tool steel
,
Annealing
,
Machining
,
Pickling (Metals)
,
Casting
,
Cutting
,
Machinability
,
Sands
,
Skin effect
The Significance of the Thermal Number in Metal Machining
Trans. ASME. January 1953, 75(1): 109–115.
doi: https://doi.org/10.1115/1.4015237
Topics:
Machining
,
Metals
,
Cutting
,
Flow (Dynamics)
,
Heat
,
Shear (Mechanics)
,
Temperature distribution
,
Theoretical analysis
Discussions and Closures
Discussion: “A Clearanceometer for Determining Blade-Tip Clearances of Axial-Flow Compressors” (Brunot, A. W., and Fulton, R. O., 1953, Trans. ASME, 75, pp. 1–5)
Trans. ASME. January 1953, 75(1): 5.
doi: https://doi.org/10.1115/1.4015190
Topics:
Axial flow
,
Blades
,
Compressors
Discussion: “A Clearanceometer for Determining Blade-Tip Clearances of Axial-Flow Compressors” (Brunot, A. W., and Fulton, R. O., 1953, Trans. ASME, 75, pp. 1–5)
Trans. ASME. January 1953, 75(1): 5–6.
doi: https://doi.org/10.1115/1.4015191
Topics:
Axial flow
,
Blades
,
Compressors
Closure to “Discussions of ‘A Clearanceometer for Determining Blade-Tip Clearances of Axial-Flow Compressors’” (1953, Trans. ASME, 75, pp. 5–6)
Trans. ASME. January 1953, 75(1): 6.
doi: https://doi.org/10.1115/1.4015192
Topics:
Axial flow
,
Blades
Discussion: “Fast Thermocouples as Control-System Elements Sensing Exhaust-Gas Temperatures in Aircraft Gas Turbines” (Alford, J. S., and Heising, C. R., 1953, Trans. ASME, 75, pp. 7–13)
Trans. ASME. January 1953, 75(1): 13–14.
doi: https://doi.org/10.1115/1.4015194
Topics:
Aircraft
,
Control systems
,
Exhaust systems
,
Gas turbines
,
Temperature
,
Thermocouples
Discussion: “Fast Thermocouples as Control-System Elements Sensing Exhaust-Gas Temperatures in Aircraft Gas Turbines” (Alford, J. S., and Heising, C. R., 1953, Trans. ASME, 75, pp. 7–13)
Trans. ASME. January 1953, 75(1): 14.
doi: https://doi.org/10.1115/1.4015195
Topics:
Aircraft
,
Control systems
,
Exhaust systems
,
Gas turbines
,
Temperature
,
Thermocouples
Discussion: “A Study of Burner Oscillations of the Organ-Pipe Type” (Putnam, A. A., and Dennis, W. R., 1953, Trans. ASME, 75, pp. 15–26)
Trans. ASME. January 1953, 75(1): 27.
doi: https://doi.org/10.1115/1.4015197
Topics:
Oscillations
,
Pipes
Discussion: “A Study of Burner Oscillations of the Organ-Pipe Type” (Putnam, A. A., and Dennis, W. R., 1953, Trans. ASME, 75, pp. 15–26)
Trans. ASME. January 1953, 75(1): 27.
doi: https://doi.org/10.1115/1.4015198
Topics:
Oscillations
,
Pipes
Closure to “Discussions of ‘A Study of Burner Oscillations of the Organ-Pipe Type’” (1953, Trans. ASME, 75, p. 27)
Trans. ASME. January 1953, 75(1): 27–28.
doi: https://doi.org/10.1115/1.4015199
Topics:
Oscillations
,
Pipes
Discussion: “An Energy Basis for Comparison of Performance of Combustion Chambers” (Nichols, J. B., 1953, Trans. ASME, 75, pp. 29–33)
Trans. ASME. January 1953, 75(1): 33.
doi: https://doi.org/10.1115/1.4015201
Topics:
Combustion chambers
Closure to “Discussion of ‘An Energy Basis for Comparison of Performance of Combustion Chambers’” (1953, Trans. ASME, 75, p. 33)
Trans. ASME. January 1953, 75(1): 33.
doi: https://doi.org/10.1115/1.4015202
Topics:
Combustion
Discussion: “Comparative Performance of Coals of Different Rank in a Film-Cooled Gas-Turbine Combustor” (Warren, T. E., Hudson, H. P., Robertson, J. D., and Mulligan, J. C., 1953, Trans. ASME, 75, pp. 35–40)
Trans. ASME. January 1953, 75(1): 40.
doi: https://doi.org/10.1115/1.4015204
Topics:
Coal
,
Combustion chambers
,
Gas turbines
Discussion: “Comparative Performance of Coals of Different Rank in a Film-Cooled Gas-Turbine Combustor” (Warren, T. E., Hudson, H. P., Robertson, J. D., and Mulligan, J. C., 1953, Trans. ASME, 75, pp. 35–40)
Trans. ASME. January 1953, 75(1): 40–41.
doi: https://doi.org/10.1115/1.4015205
Topics:
Coal
,
Combustion chambers
,
Gas turbines
Discussion: “Comparative Performance of Coals of Different Rank in a Film-Cooled Gas-Turbine Combustor” (Warren, T. E., Hudson, H. P., Robertson, J. D., and Mulligan, J. C., 1953, Trans. ASME, 75, pp. 35–40)
Trans. ASME. January 1953, 75(1): 41–42.
doi: https://doi.org/10.1115/1.4015206
Topics:
Coal
,
Combustion chambers
,
Gas turbines
Closure to “Discussions of ‘Comparative Performance of Coals of Different Rank in a Film-Cooled Gas-Turbine Combustor’” (1953, Trans. ASME, 75, pp. 40–42)
Trans. ASME. January 1953, 75(1): 42.
doi: https://doi.org/10.1115/1.4015207
Topics:
Coal
,
Gas turbines
Discussion: “A Nondimensional Correlation of Flame Propagation at Subatmospheric Pressures” (Cullen, R. E., 1953, Trans. ASME, 75, pp. 43–47)
Trans. ASME. January 1953, 75(1): 48.
doi: https://doi.org/10.1115/1.4015209
Topics:
Flames
Discussion: “A Nondimensional Correlation of Flame Propagation at Subatmospheric Pressures” (Cullen, R. E., 1953, Trans. ASME, 75, pp. 43–47)
Trans. ASME. January 1953, 75(1): 48.
doi: https://doi.org/10.1115/1.4015210
Topics:
Flames
Discussion: “A Nondimensional Correlation of Flame Propagation at Subatmospheric Pressures” (Cullen, R. E., 1953, Trans. ASME, 75, pp. 43–47)
Trans. ASME. January 1953, 75(1): 48–49.
doi: https://doi.org/10.1115/1.4015211
Topics:
Flames
Closure to “Discussions of ‘A Nondimensional Correlation of Flame Propagation at Subatmospheric Pressures’” (1953, Trans. ASME, 75, pp. 48–49)
Trans. ASME. January 1953, 75(1): 49.
doi: https://doi.org/10.1115/1.4015212
Topics:
Flames
Discussion: “NACA Sonic-Flow-Orifice Temperature Probe in High-Gas-Temperature Measurement” (Blackshear, Jr., P. L., 1953, Trans. ASME, 75, pp. 51–54)
Trans. ASME. January 1953, 75(1): 55.
doi: https://doi.org/10.1115/1.4015214
Topics:
Flow (Dynamics)
,
Probes
,
Temperature
Discussion: “NACA Sonic-Flow-Orifice Temperature Probe in High-Gas-Temperature Measurement” (Blackshear, Jr., P. L., 1953, Trans. ASME, 75, pp. 51–54)
Trans. ASME. January 1953, 75(1): 55–56.
doi: https://doi.org/10.1115/1.4015215
Topics:
Flow (Dynamics)
,
Probes
,
Temperature
Discussion: “NACA Sonic-Flow-Orifice Temperature Probe in High-Gas-Temperature Measurement” (Blackshear, Jr., P. L., 1953, Trans. ASME, 75, pp. 51–54)
Trans. ASME. January 1953, 75(1): 56.
doi: https://doi.org/10.1115/1.4015216
Topics:
Flow (Dynamics)
,
Probes
,
Temperature
Closure to “Discussions of ‘NACA Sonic-Flow-Orifice Temperature Probe in High-Gas-Temperature Measurement’” (1953, Trans. ASME, 75, pp. 55–56)
Trans. ASME. January 1953, 75(1): 56–58.
doi: https://doi.org/10.1115/1.4015217
Topics:
Flow (Dynamics)
,
Probes
,
Temperature
Discussion: “Use of the Centrifugal Governor Mechanism as a Torsional Vibration Absorber” (Pringle, O. A., 1953, Trans. ASME, 75, pp. 59–61)
Trans. ASME. January 1953, 75(1): 61–62.
doi: https://doi.org/10.1115/1.4015219
Topics:
Governors
,
Vibration absorbers
Closure to “Discussion of ‘Use of the Centrifugal Governor Mechanism as a Torsional Vibration Absorber’” (1953, Trans. ASME, 75, pp. 61–62)
Trans. ASME. January 1953, 75(1): 62.
doi: https://doi.org/10.1115/1.4015220
Discussion: “Axial Tension and Bending Interaction Curves for Members Loaded Inelastically” (Brush, D. O., and Sidebottom, O. M., 1953, Trans. ASME, 75, pp. 63–71)
Trans. ASME. January 1953, 75(1): 71–72.
doi: https://doi.org/10.1115/1.4015222
Topics:
Tension
Closure to “Discussion of ‘Axial Tension and Bending Interaction Curves for Members Loaded Inelastically’” (1953, Trans. ASME, 75, pp. 71–72)
Trans. ASME. January 1953, 75(1): 72.
doi: https://doi.org/10.1115/1.4015223
Topics:
Tension
Discussion: “Distribution of Mechanical and Thermal Stresses in Multilayer Cylinders” (Strub, R. A., 1953, Trans. ASME, 75, pp. 73–79)
Trans. ASME. January 1953, 75(1): 79–81.
doi: https://doi.org/10.1115/1.4015225
Topics:
Cylinders
,
Thermal stresses
Discussion: “Distribution of Mechanical and Thermal Stresses in Multilayer Cylinders” (Strub, R. A., 1953, Trans. ASME, 75, pp. 73–79)
Trans. ASME. January 1953, 75(1): 81.
doi: https://doi.org/10.1115/1.4015226
Topics:
Cylinders
,
Thermal stresses
Closure to “Discussions of ‘Distribution of Mechanical and Thermal Stresses in Multilayer Cylinders’” (1953, Trans. ASME, 75, pp. 79–81)
Trans. ASME. January 1953, 75(1): 81–82.
doi: https://doi.org/10.1115/1.4015227
Topics:
Thermal stresses
Discussion: “The Stresses in a Pressure Vessel With a Hemispherical Head” (Watts, G. W., and Lang, H. A., 1953, Trans. ASME, 75, pp. 83–89)
Trans. ASME. January 1953, 75(1): 89.
doi: https://doi.org/10.1115/1.4015229
Topics:
Electrical measurement
,
Pressure vessels
,
Stress
Closure to “Discussion of ‘The Stresses in a Pressure Vessel With a Hemispherical Head’” (1953, Trans. ASME, 75, p. 89)
Trans. ASME. January 1953, 75(1): 89–90.
doi: https://doi.org/10.1115/1.4015230
Topics:
Pressure vessels
,
Stress
Discussion: “Relative Abrasiveness of the Cast Surfaces of Various Gray-Iron Castings on Single-Point Tools of High-Speed Steel” (Datsko, Joseph, and Boston, O. W., 1953, Trans. ASME, 75, pp. 103–107)
Trans. ASME. January 1953, 75(1): 107–108.
doi: https://doi.org/10.1115/1.4015234
Topics:
Gray iron
,
Tool steel
Discussion: “Relative Abrasiveness of the Cast Surfaces of Various Gray-Iron Castings on Single-Point Tools of High-Speed Steel” (Datsko, Joseph, and Boston, O. W., 1953, Trans. ASME, 75, pp. 103–107)
Trans. ASME. January 1953, 75(1): 108.
doi: https://doi.org/10.1115/1.4015235
Topics:
Gray iron
,
Tool steel
Discussion: “The Significance of the Thermal Number in Metal Machining” (Chao, B. T., and Trigger, K. J., 1953, Trans. ASME, 75, pp. 109–115)
Trans. ASME. January 1953, 75(1): 115.
doi: https://doi.org/10.1115/1.4015238
Discussion: “The Significance of the Thermal Number in Metal Machining” (Chao, B. T., and Trigger, K. J., 1953, Trans. ASME, 75, pp. 109–115)
Trans. ASME. January 1953, 75(1): 116–117.
doi: https://doi.org/10.1115/1.4015239
Discussion: “The Significance of the Thermal Number in Metal Machining” (Chao, B. T., and Trigger, K. J., 1953, Trans. ASME, 75, pp. 109–115)
Trans. ASME. January 1953, 75(1): 117–118.
doi: https://doi.org/10.1115/1.4015240
Closure to “Discussions of ‘The Significance of the Thermal Number in Metal Machining’” (1953, Trans. ASME, 75, pp. 115–118)
Trans. ASME. January 1953, 75(1): 118–120.
doi: https://doi.org/10.1115/1.4015241
Topics:
Metals
Email alerts
RSS Feeds
Behavior of Gas–Solid Two-Phase Flow in a Backward Facing Step - Effect of Interparticle Collisions
J. Fluids Eng (April 2023)
Predicting Behavior of Gas-Solids Systems for Non-Uniform Fluidization
J. Fluids Eng (May 2023)