Skip to Main Content
American Society of Mechanical Engineers: Digital Collection
Cart
header search
Search
Advanced Search
Skip Nav Destination

Issues

Volume 75, Issue 4
May 1953
This article was originally published in
Transactions of the American Society of Mechanical Engineers
Issue Cover
ISSN 0097-6822
In this Issue

Research Papers

Influence of Unheated Starting Sections on the Heat Transfer From a Cylinder to Gas Streams Parallel to the Axis
William Tessin, Max Jakob
Trans. ASME. May 1953, 75(4): 473–480. doi: https://doi.org/10.1115/1.4015325
View articletitled, Influence of Unheated Starting Sections on the Heat Transfer From a Cylinder to Gas Streams Parallel to the Axis
Open the PDF for in another window
Topics: Cylinders , Heat transfer , Flat plates , Turbulence
The Determination of Local Forced-Convection Coefficients for Spheres
John R. Cary
Trans. ASME. May 1953, 75(4): 483–487. doi: https://doi.org/10.1115/1.4015328
View articletitled, The Determination of Local Forced-Convection Coefficients for Spheres
Open the PDF for in another window
Topics: Forced convection , Heat transfer , Reynolds number
An Investigation of Heat Transfer From an Inclined Flat Plate in Free Convection
B. R. Rich
Trans. ASME. May 1953, 75(4): 489–498. doi: https://doi.org/10.1115/1.4015329
View articletitled, An Investigation of Heat Transfer From an Inclined Flat Plate in Free Convection
Open the PDF for in another window
Topics: Flat plates , Heat transfer , Natural convection , Vertical plates , Differential equations , Flow (Dynamics) , Gravity (Force) , Plates (structures) , Temperature , Thermal conductivity
Design of a Square-Root-Extracting, Force-Balance, Pneumatic Transmitter, Including Derivation of Formulas
Arnold Goldberg
Trans. ASME. May 1953, 75(4): 501–506. doi: https://doi.org/10.1115/1.4015333
View articletitled, Design of a Square-Root-Extracting, Force-Balance, Pneumatic Transmitter, Including Derivation of Formulas
Open the PDF for in another window
Topics: Design , Flow (Dynamics) , Pressure , Flowmeters , Fluid measurement , Instrumentation , Pipes , Shapes
On the Solution of the Reynolds Equation for Slider-Bearing Lubrication—III: Effect of Transverse Curvature
A. Charnes, E. Saibel, A. S. C. Ying
Trans. ASME. May 1953, 75(4): 507–512. doi: https://doi.org/10.1115/1.4015336
View articletitled, On the Solution of the Reynolds Equation for Slider-Bearing Lubrication—III: Effect of Transverse Curvature
Open the PDF for in another window
Topics: Lubrication , Slider bearings , Film thickness , Leakage
A Simple High-Speed Air Spinner for Centrifugal Testing of Small Mechanical Devices
C. F. Bild, P. F. Vial
Trans. ASME. May 1953, 75(4): 515–518. doi: https://doi.org/10.1115/1.4015340
View articletitled, A Simple High-Speed Air Spinner for Centrifugal Testing of Small Mechanical Devices
Open the PDF for in another window
Topics: Testing , Clocks , Electromechanical devices , Reactor protection systems , Spin (Aerodynamics) , Spinning (Textile)
A Method of Obtaining Shear Stress-Strain Graphs by Interpretation of Moment-Twist Data
P. H. Kaar
Trans. ASME. May 1953, 75(4): 521–523. doi: https://doi.org/10.1115/1.4015345
View articletitled, A Method of Obtaining Shear Stress-Strain Graphs by Interpretation of Moment-Twist Data
Open the PDF for in another window
Topics: Shear (Mechanics) , Stress , Stress-strain curves , Engineering laboratories , Shear strength , Steel , Trucks
Corrosion and Erosion in the Synthetic-Fuels Demonstration Plant
G. D. Gardner, J. T. Donovan
Trans. ASME. May 1953, 75(4): 525–532. doi: https://doi.org/10.1115/1.4015346
View articletitled, Corrosion and Erosion in the Synthetic-Fuels Demonstration Plant
Open the PDF for in another window
Topics: Corrosion , Erosion , Synthetic fuels , High pressure (Physics) , Alloy steel , Coal liquefaction , Design , Embrittlement , Fatigue , Gases
Pressure Operation of Large Pulverized-Coal-Fired Boilers on the American Gas and Electric System
G. W. Bice, W. M. Yeknik
Trans. ASME. May 1953, 75(4): 535–545. doi: https://doi.org/10.1115/1.4015349
View articletitled, Pressure Operation of Large Pulverized-Coal-Fired Boilers on the American Gas and Electric System
Open the PDF for in another window
Topics: Boilers , Coal , Electronic systems , Pressure , Construction , Design , Steel , Suction , Thermal efficiency
Radioactive Cutting Tools for Rapid Tool-Life Testing
M. E. Merchant, Hans Ernst, E. J. Krabacher
Trans. ASME. May 1953, 75(4): 549–559. doi: https://doi.org/10.1115/1.4015354
View articletitled, Radioactive Cutting Tools for Rapid Tool-Life Testing
Open the PDF for in another window
Topics: Cutting tools , Testing , Cutting , Wear , Fluids , Irradiation (Radiation exposure) , Machining , Neutrons , Nuclear reactors , Particulate matter
The Influence of Higher Rake Angles on Performance in Milling
J. H. Crawford, M. Eugene Merchant
Trans. ASME. May 1953, 75(4): 561–566. doi: https://doi.org/10.1115/1.4015355
View articletitled, The Influence of Higher Rake Angles on Performance in Milling
Open the PDF for in another window
Topics: Cutting , Finishes , Friction , Metal cutting , Milling , Shear (Mechanics) , Temperature , Tool steel
Vibrations in Knee-Type Horizontal Milling Machines
Ivar Bendixen
Trans. ASME. May 1953, 75(4): 567–572. doi: https://doi.org/10.1115/1.4015356
View articletitled, Vibrations in Knee-Type Horizontal Milling Machines
Open the PDF for in another window
Topics: Knee , Milling machines , Vibration , Milling , Damping , Resonance
Plastic Flow in a Lead Extrusion
C. T. Yang, E. G. Thomsen
Trans. ASME. May 1953, 75(4): 575–579. doi: https://doi.org/10.1115/1.4015362
View articletitled, Plastic Flow in a Lead Extrusion
Open the PDF for in another window
Topics: Deformation , Extruding , Metals , Flow (Dynamics) , Surface quality , Corners (Structural elements) , Cylinders , Fluid dynamics , Stress
Some Observations on Chip Curl in the Metal-Cutting Process Under Orthogonal Cutting Conditions
R. S. Hahn
Trans. ASME. May 1953, 75(4): 581–587. doi: https://doi.org/10.1115/1.4015365
View articletitled, Some Observations on Chip Curl in the Metal-Cutting Process Under Orthogonal Cutting Conditions
Open the PDF for in another window
Topics: Cutting , Metal cutting , Shear (Mechanics) , Temperature effects , Transients (Dynamics)
Deformation Work Absorbed by the Workpiece During Metal Cutting
E. G. Thomsen, J. T. Lapsley, Jr., R. C. Grassi
Trans. ASME. May 1953, 75(4): 591–598. doi: https://doi.org/10.1115/1.4015369
View articletitled, Deformation Work Absorbed by the Workpiece During Metal Cutting
Open the PDF for in another window
Topics: Deformation , Metal cutting , Cutting , Plasticity , Size effect
Stress Relaxation in Compression of Rubber and Synthetic-Rubber Vulcanizates Immersed in Oil
J. R. Beatty, A. E. Juve
Trans. ASME. May 1953, 75(4): 605–611. doi: https://doi.org/10.1115/1.4015375
View articletitled, Stress Relaxation in Compression of Rubber and Synthetic-Rubber Vulcanizates Immersed in Oil
Open the PDF for in another window
Topics: Compression , Relaxation (Physics) , Rubber , Stress , Synthetic rubbers , Gaskets , Polymers , Temperature
Mechanical Properties of Glass-Cloth Plastic Laminates as Related to Direction of Stress and Construction of Laminate
Fred Werren
Trans. ASME. May 1953, 75(4): 613–619. doi: https://doi.org/10.1115/1.4015378
View articletitled, Mechanical Properties of Glass-Cloth Plastic Laminates as Related to Direction of Stress and Construction of Laminate
Open the PDF for in another window
Topics: Construction , Glass , Laminates , Mechanical properties , Plastic laminates , Stress , Textiles , Aircraft , Composite materials
Effect of Preloading and Fatigue on Mechanical Properties of Glass-Cloth Plastic Laminates
A. D. Freas
Trans. ASME. May 1953, 75(4): 621–633. doi: https://doi.org/10.1115/1.4015379
View articletitled, Effect of Preloading and Fatigue on Mechanical Properties of Glass-Cloth Plastic Laminates
Open the PDF for in another window
Topics: Fatigue , Glass , Mechanical properties , Plastic laminates , Textiles , Stress , Compression , Elastic moduli , Fatigue strength , Laminates
Studies of Submergence Requirements of High-Specific-Speed Pumps
H. W. Iversen
Trans. ASME. May 1953, 75(4): 635–638. doi: https://doi.org/10.1115/1.4015380
View articletitled, Studies of Submergence Requirements of High-Specific-Speed Pumps
Open the PDF for in another window
Topics: Pumps , Suction , Vortices , Air entrainment , Clearances (Engineering) , Design , Friction
Hydraulic Problems Encountered in Intake Structures of Vertical Wet-Pit Pumps and Methods Leading to Their Solution
W. H. Fraser
Trans. ASME. May 1953, 75(4): 643–648. doi: https://doi.org/10.1115/1.4015384
View articletitled, Hydraulic Problems Encountered in Intake Structures of Vertical Wet-Pit Pumps and Methods Leading to Their Solution
Open the PDF for in another window
Topics: Pumps , Flow (Dynamics) , Design , Suction , Tunnels
Ten Years’ Progress in Management: Foreword
Lillian M. Gilbreth
Trans. ASME. May 1953, 75(4): 653–654. doi: https://doi.org/10.1115/1.4015389
View articletitled, Ten Years’ Progress in Management: Foreword
Open the PDF for in another window
Ten Years’ Progress in Management: The Theory of Organization and Management
Robert T. Livingston
Trans. ASME. May 1953, 75(4): 655–660. doi: https://doi.org/10.1115/1.4015390
View articletitled, Ten Years’ Progress in Management: The Theory of Organization and Management
Open the PDF for in another window
Ten Years’ Progress in Management: Statistical Quality Control
Ellis R. Ott
Trans. ASME. May 1953, 75(4): 660–663. doi: https://doi.org/10.1115/1.4015391
View articletitled, Ten Years’ Progress in Management: Statistical Quality Control
Open the PDF for in another window
Topics: Quality control
Ten Years’ Progress in Management: Production Planning and Control
Eugene H. MacNiece
Trans. ASME. May 1953, 75(4): 664–667. doi: https://doi.org/10.1115/1.4015392
View articletitled, Ten Years’ Progress in Management: Production Planning and Control
Open the PDF for in another window
Topics: Production planning
Ten Years’ Progress in Management: Work Simplification and Work Measurement
David B. Porter, Ercole Rosa, Jr.
Trans. ASME. May 1953, 75(4): 667–671. doi: https://doi.org/10.1115/1.4015393
View articletitled, Ten Years’ Progress in Management: Work Simplification and Work Measurement
Open the PDF for in another window
Topics: Methods engineering
Ten Years’ Progress in Management: Wage Incentives
Phil Carroll
Trans. ASME. May 1953, 75(4): 671–675. doi: https://doi.org/10.1115/1.4015394
View articletitled, Ten Years’ Progress in Management: Wage Incentives
Open the PDF for in another window
Ten Years’ Progress in Management: Industrial-Plant Operation
L. C. Morrow
Trans. ASME. May 1953, 75(4): 675–680. doi: https://doi.org/10.1115/1.4015395
View articletitled, Ten Years’ Progress in Management: Industrial-Plant Operation
Open the PDF for in another window
Topics: Industrial plants
Ten Years’ Progress in Management: Purchasing
Stuart F. Heinritz
Trans. ASME. May 1953, 75(4): 680–683. doi: https://doi.org/10.1115/1.4015396
View articletitled, Ten Years’ Progress in Management: Purchasing
Open the PDF for in another window
Ten Years’ Progress in Management: Marketing and Distribution
Noble Hall
Trans. ASME. May 1953, 75(4): 683–685. doi: https://doi.org/10.1115/1.4015397
View articletitled, Ten Years’ Progress in Management: Marketing and Distribution
Open the PDF for in another window
Ten Years’ Progress in Management: Personnel Administration
Hiram S. Hall
Trans. ASME. May 1953, 75(4): 686–691. doi: https://doi.org/10.1115/1.4015398
View articletitled, Ten Years’ Progress in Management: Personnel Administration
Open the PDF for in another window
Ten Years’ Progress in Management: Public Relations
A. H. Forster
Trans. ASME. May 1953, 75(4): 691–695. doi: https://doi.org/10.1115/1.4015399
View articletitled, Ten Years’ Progress in Management: Public Relations
Open the PDF for in another window
Ten Years’ Progress in Management: Labor Relations
Gideon M. Varga
Trans. ASME. May 1953, 75(4): 695–700. doi: https://doi.org/10.1115/1.4015400
View articletitled, Ten Years’ Progress in Management: Labor Relations
Open the PDF for in another window
Ten Years’ Progress in Management: Cost Accounting
J. A. Willard, W. P. Fiske
Trans. ASME. May 1953, 75(4): 700–701. doi: https://doi.org/10.1115/1.4015401
View articletitled, Ten Years’ Progress in Management: Cost Accounting
Open the PDF for in another window
Topics: Accounting
Ten Years’ Progress in Management: Federal Administrative Management
Donald C. Stone
Trans. ASME. May 1953, 75(4): 702–708. doi: https://doi.org/10.1115/1.4015402
View articletitled, Ten Years’ Progress in Management: Federal Administrative Management
Open the PDF for in another window
Ten Years’ Progress in Management: International Co-Operation
Harold B. Maynard
Trans. ASME. May 1953, 75(4): 708–710. doi: https://doi.org/10.1115/1.4015403
View articletitled, Ten Years’ Progress in Management: International Co-Operation
Open the PDF for in another window

Discussions and Closures

Discussion: “Influence of Unheated Starting Sections on the Heat Transfer From a Cylinder to Gas Streams Parallel to the Axis” (Tessin, William, and Jakob, Max, 1953, Trans. ASME, 75, pp. 473–480)
D. S. Maisel
Trans. ASME. May 1953, 75(4): 480–481. doi: https://doi.org/10.1115/1.4015326
View articletitled, Discussion: “Influence of Unheated Starting Sections on the Heat Transfer From a Cylinder to Gas Streams Parallel to the Axis” (Tessin, William, and Jakob, Max, 1953, Trans. ASME, 75, pp. 473–480)
Open the PDF for in another window
Topics: Cylinders , Heat transfer
Closure to “Discussion of ‘Influence of Unheated Starting Sections on the Heat Transfer From a Cylinder to Gas Streams Parallel to the Axis’” (1953, Trans. ASME, 75, pp. 480–481)
William Tessin, Max Jakob
Trans. ASME. May 1953, 75(4): 481. doi: https://doi.org/10.1115/1.4015327
View articletitled, Closure to “Discussion of ‘Influence of Unheated Starting Sections on the Heat Transfer From a Cylinder to Gas Streams Parallel to the Axis’” (1953, Trans. ASME, 75, pp. 480–481)
Open the PDF for in another window
Topics: Cylinders , Heat transfer
Discussion: “An Investigation of Heat Transfer From an Inclined Flat Plate in Free Convection” (Rich, B. R., 1953, Trans. ASME, 75, pp. 489–498)
Simon Ostrach
Trans. ASME. May 1953, 75(4): 498. doi: https://doi.org/10.1115/1.4015330
View articletitled, Discussion: “An Investigation of Heat Transfer From an Inclined Flat Plate in Free Convection” (Rich, B. R., 1953, Trans. ASME, 75, pp. 489–498)
Open the PDF for in another window
Topics: Flat plates , Heat transfer , Natural convection
Discussion: “An Investigation of Heat Transfer From an Inclined Flat Plate in Free Convection” (Rich, B. R., 1953, Trans. ASME, 75, pp. 489–498)
J. Rutkowski, M. Tribus
Trans. ASME. May 1953, 75(4): 498–499. doi: https://doi.org/10.1115/1.4015331
View articletitled, Discussion: “An Investigation of Heat Transfer From an Inclined Flat Plate in Free Convection” (Rich, B. R., 1953, Trans. ASME, 75, pp. 489–498)
Open the PDF for in another window
Topics: Flat plates , Heat transfer , Natural convection
Closure to “Discussions of ‘An Investigation of Heat Transfer From an Inclined Flat Plate in Free Convection’” (1953, Trans. ASME, 75, pp. 498–499)
B. R. Rich
Trans. ASME. May 1953, 75(4): 499. doi: https://doi.org/10.1115/1.4015332
View articletitled, Closure to “Discussions of ‘An Investigation of Heat Transfer From an Inclined Flat Plate in Free Convection’” (1953, Trans. ASME, 75, pp. 498–499)
Open the PDF for in another window
Topics: Flat plates , Heat transfer
Discussion: “Design of a Square-Root-Extracting, Force-Balance, Pneumatic Transmitter, Including Derivation of Formulas” (Goldberg, Arnold, 1953, Trans. ASME, 75, pp. 501–506)
J. A. Perry, Jr.
Trans. ASME. May 1953, 75(4): 506. doi: https://doi.org/10.1115/1.4015334
View articletitled, Discussion: “Design of a Square-Root-Extracting, Force-Balance, Pneumatic Transmitter, Including Derivation of Formulas” (Goldberg, Arnold, 1953, Trans. ASME, 75, pp. 501–506)
Open the PDF for in another window
Topics: Design
Closure to “Discussion of ‘Design of a Square-Root-Extracting, Force-Balance, Pneumatic Transmitter, Including Derivation of Formulas’” (1953, Trans. ASME, 75, p. 506)
Arnold Goldberg
Trans. ASME. May 1953, 75(4): 506. doi: https://doi.org/10.1115/1.4015335
View articletitled, Closure to “Discussion of ‘Design of a Square-Root-Extracting, Force-Balance, Pneumatic Transmitter, Including Derivation of Formulas’” (1953, Trans. ASME, 75, p. 506)
Open the PDF for in another window
Topics: Design
Discussion: “On the Solution of the Reynolds Equation for Slider-Bearing Lubrication—III: Effect of Transverse Curvature” (Charnes, A., Saibel, E., and Ying, A. S. C., 1953, Trans. ASME, 75, pp. 507–512)
F. Osterle
Trans. ASME. May 1953, 75(4): 512. doi: https://doi.org/10.1115/1.4015337
View articletitled, Discussion: “On the Solution of the Reynolds Equation for Slider-Bearing Lubrication—III: Effect of Transverse Curvature” (Charnes, A., Saibel, E., and Ying, A. S. C., 1953, Trans. ASME, 75, pp. 507–512)
Open the PDF for in another window
Topics: Lubrication , Slider bearings
Discussion: “On the Solution of the Reynolds Equation for Slider-Bearing Lubrication—III: Effect of Transverse Curvature” (Charnes, A., Saibel, E., and Ying, A. S. C., 1953, Trans. ASME, 75, pp. 507–512)
A. A. Raimondi
Trans. ASME. May 1953, 75(4): 512–513. doi: https://doi.org/10.1115/1.4015338
View articletitled, Discussion: “On the Solution of the Reynolds Equation for Slider-Bearing Lubrication—III: Effect of Transverse Curvature” (Charnes, A., Saibel, E., and Ying, A. S. C., 1953, Trans. ASME, 75, pp. 507–512)
Open the PDF for in another window
Topics: Lubrication , Slider bearings
Closure to “Discussions of ‘On the Solution of the Reynolds Equation for Slider-Bearing Lubrication—III: Effect of Transverse Curvature’” (1953, Trans. ASME, 75, pp. 512–513)
A. Charnes, E. Saibel, A. S. C. Ying
Trans. ASME. May 1953, 75(4): 513. doi: https://doi.org/10.1115/1.4015339
View articletitled, Closure to “Discussions of ‘On the Solution of the Reynolds Equation for Slider-Bearing Lubrication—III: Effect of Transverse Curvature’” (1953, Trans. ASME, 75, pp. 512–513)
Open the PDF for in another window
Topics: Lubrication , Slider bearings
Discussion: “A Simple High-Speed Air Spinner for Centrifugal Testing of Small Mechanical Devices” (Bild, C. F., and Vial, P. F., 1953, Trans. ASME, 75, pp. 515–518)
O. C. Brewster
Trans. ASME. May 1953, 75(4): 518–519. doi: https://doi.org/10.1115/1.4015341
View articletitled, Discussion: “A Simple High-Speed Air Spinner for Centrifugal Testing of Small Mechanical Devices” (Bild, C. F., and Vial, P. F., 1953, Trans. ASME, 75, pp. 515–518)
Open the PDF for in another window
Topics: Testing
Discussion: “A Simple High-Speed Air Spinner for Centrifugal Testing of Small Mechanical Devices” (Bild, C. F., and Vial, P. F., 1953, Trans. ASME, 75, pp. 515–518)
J. A. Frost
Trans. ASME. May 1953, 75(4): 519. doi: https://doi.org/10.1115/1.4015342
View articletitled, Discussion: “A Simple High-Speed Air Spinner for Centrifugal Testing of Small Mechanical Devices” (Bild, C. F., and Vial, P. F., 1953, Trans. ASME, 75, pp. 515–518)
Open the PDF for in another window
Topics: Testing
Discussion: “A Simple High-Speed Air Spinner for Centrifugal Testing of Small Mechanical Devices” (Bild, C. F., and Vial, P. F., 1953, Trans. ASME, 75, pp. 515–518)
H. E. Ruehlemann
Trans. ASME. May 1953, 75(4): 519. doi: https://doi.org/10.1115/1.4015343
View articletitled, Discussion: “A Simple High-Speed Air Spinner for Centrifugal Testing of Small Mechanical Devices” (Bild, C. F., and Vial, P. F., 1953, Trans. ASME, 75, pp. 515–518)
Open the PDF for in another window
Topics: Testing
Closure to “Discussions of ‘A Simple High-Speed Air Spinner for Centrifugal Testing of Small Mechanical Devices’” (1953, Trans. ASME, 75, pp. 518–519)
C. F. Bild, P. F. Vial
Trans. ASME. May 1953, 75(4): 519. doi: https://doi.org/10.1115/1.4015344
View articletitled, Closure to “Discussions of ‘A Simple High-Speed Air Spinner for Centrifugal Testing of Small Mechanical Devices’” (1953, Trans. ASME, 75, pp. 518–519)
Open the PDF for in another window
Topics: Testing
Discussion: “Corrosion and Erosion in the Synthetic-Fuels Demonstration Plant” (Gardner, G. D., and Donovan, J. T., 1953, Trans. ASME, 75, pp. 525–532)
G. A. Nelson
Trans. ASME. May 1953, 75(4): 532. doi: https://doi.org/10.1115/1.4015347
View articletitled, Discussion: “Corrosion and Erosion in the Synthetic-Fuels Demonstration Plant” (Gardner, G. D., and Donovan, J. T., 1953, Trans. ASME, 75, pp. 525–532)
Open the PDF for in another window
Topics: Corrosion , Erosion , Synthetic fuels
Closure to “Discussion of ‘Corrosion and Erosion in the Synthetic-Fuels Demonstration Plant’” (1953, Trans. ASME, 75, p. 532)
G. D. Gardner, J. T. Donovan
Trans. ASME. May 1953, 75(4): 533. doi: https://doi.org/10.1115/1.4015348
View articletitled, Closure to “Discussion of ‘Corrosion and Erosion in the Synthetic-Fuels Demonstration Plant’” (1953, Trans. ASME, 75, p. 532)
Open the PDF for in another window
Topics: Corrosion , Erosion , Synthetic fuels
Discussion: “Pressure Operation of Large Pulverized-Coal-Fired Boilers on the American Gas and Electric System” (Bice, G. W., and Yeknik, W. M., 1953, Trans. ASME, 75, pp. 535–545)
M. H. Kuhner
Trans. ASME. May 1953, 75(4): 545–546. doi: https://doi.org/10.1115/1.4015350
View articletitled, Discussion: “Pressure Operation of Large Pulverized-Coal-Fired Boilers on the American Gas and Electric System” (Bice, G. W., and Yeknik, W. M., 1953, Trans. ASME, 75, pp. 535–545)
Open the PDF for in another window
Topics: Boilers , Coal , Electronic systems , Pressure
Discussion: “Pressure Operation of Large Pulverized-Coal-Fired Boilers on the American Gas and Electric System” (Bice, G. W., and Yeknik, W. M., 1953, Trans. ASME, 75, pp. 535–545)
P. R. Loughin
Trans. ASME. May 1953, 75(4): 546. doi: https://doi.org/10.1115/1.4015351
View articletitled, Discussion: “Pressure Operation of Large Pulverized-Coal-Fired Boilers on the American Gas and Electric System” (Bice, G. W., and Yeknik, W. M., 1953, Trans. ASME, 75, pp. 535–545)
Open the PDF for in another window
Topics: Boilers , Coal , Electronic systems , Pressure
Discussion: “Pressure Operation of Large Pulverized-Coal-Fired Boilers on the American Gas and Electric System” (Bice, G. W., and Yeknik, W. M., 1953, Trans. ASME, 75, pp. 535–545)
W. L. Wingert
Trans. ASME. May 1953, 75(4): 546–548. doi: https://doi.org/10.1115/1.4015352
View articletitled, Discussion: “Pressure Operation of Large Pulverized-Coal-Fired Boilers on the American Gas and Electric System” (Bice, G. W., and Yeknik, W. M., 1953, Trans. ASME, 75, pp. 535–545)
Open the PDF for in another window
Topics: Boilers , Coal , Electronic systems , Pressure
Closure to “Discussions of ‘Pressure Operation of Large Pulverized-Coal-Fired Boilers on the American Gas and Electric System’” (1953, Trans. ASME, 75, pp. 545–548)
G. W. Bice, W. M. Yeknik
Trans. ASME. May 1953, 75(4): 548. doi: https://doi.org/10.1115/1.4015353
View articletitled, Closure to “Discussions of ‘Pressure Operation of Large Pulverized-Coal-Fired Boilers on the American Gas and Electric System’” (1953, Trans. ASME, 75, pp. 545–548)
Open the PDF for in another window
Topics: Boilers , Coal , Pressure
Discussion: “Vibrations in Knee-Type Horizontal Milling Machines” (Bendixen, Ivar, 1953, Trans. ASME, 75, pp. 567–572)
R. S. Hahn
Trans. ASME. May 1953, 75(4): 572. doi: https://doi.org/10.1115/1.4015357
View articletitled, Discussion: “Vibrations in Knee-Type Horizontal Milling Machines” (Bendixen, Ivar, 1953, Trans. ASME, 75, pp. 567–572)
Open the PDF for in another window
Topics: Knee , Milling machines , Vibration
Discussion: “Vibrations in Knee-Type Horizontal Milling Machines” (Bendixen, Ivar, 1953, Trans. ASME, 75, pp. 567–572)
F. W. Lucht
Trans. ASME. May 1953, 75(4): 572. doi: https://doi.org/10.1115/1.4015358
View articletitled, Discussion: “Vibrations in Knee-Type Horizontal Milling Machines” (Bendixen, Ivar, 1953, Trans. ASME, 75, pp. 567–572)
Open the PDF for in another window
Topics: Knee , Milling machines , Vibration
Discussion: “Vibrations in Knee-Type Horizontal Milling Machines” (Bendixen, Ivar, 1953, Trans. ASME, 75, pp. 567–572)
K. E. Wetzel
Trans. ASME. May 1953, 75(4): 572–573. doi: https://doi.org/10.1115/1.4015359
View articletitled, Discussion: “Vibrations in Knee-Type Horizontal Milling Machines” (Bendixen, Ivar, 1953, Trans. ASME, 75, pp. 567–572)
Open the PDF for in another window
Topics: Knee , Milling machines , Vibration
Discussion: “Vibrations in Knee-Type Horizontal Milling Machines” (Bendixen, Ivar, 1953, Trans. ASME, 75, pp. 567–572)
Troels Warming
Trans. ASME. May 1953, 75(4): 573–574. doi: https://doi.org/10.1115/1.4015360
View articletitled, Discussion: “Vibrations in Knee-Type Horizontal Milling Machines” (Bendixen, Ivar, 1953, Trans. ASME, 75, pp. 567–572)
Open the PDF for in another window
Topics: Knee , Milling machines , Vibration
Closure to “Discussions of ‘Vibrations in Knee-Type Horizontal Milling Machines’” (1953, Trans. ASME, 75, pp. 572–574)
Ivar Bendixen
Trans. ASME. May 1953, 75(4): 574. doi: https://doi.org/10.1115/1.4015361
View articletitled, Closure to “Discussions of ‘Vibrations in Knee-Type Horizontal Milling Machines’” (1953, Trans. ASME, 75, pp. 572–574)
Open the PDF for in another window
Topics: Knee , Milling , Vibration
Discussion: “Plastic Flow in a Lead Extrusion” (Yang, C. T., and Thomsen, E. G., 1953, Trans. ASME, 75, pp. 575–579)
B. W. Shaffer
Trans. ASME. May 1953, 75(4): 579. doi: https://doi.org/10.1115/1.4015363
View articletitled, Discussion: “Plastic Flow in a Lead Extrusion” (Yang, C. T., and Thomsen, E. G., 1953, Trans. ASME, 75, pp. 575–579)
Open the PDF for in another window
Topics: Deformation , Extruding
Closure to “Discussion of ‘Plastic Flow in a Lead Extrusion’” (1953, Trans. ASME, 75, p. 579)
C. T. Yang, E. G. Thomsen
Trans. ASME. May 1953, 75(4): 579. doi: https://doi.org/10.1115/1.4015364
View articletitled, Closure to “Discussion of ‘Plastic Flow in a Lead Extrusion’” (1953, Trans. ASME, 75, p. 579)
Open the PDF for in another window
Topics: Deformation
Discussion: “Some Observations on Chip Curl in the Metal-Cutting Process Under Orthogonal Cutting Conditions” (Hahn, R. S., 1953, Trans. ASME, 75, pp. 581–587)
B. T. Chao, K. J. Trigger
Trans. ASME. May 1953, 75(4): 587–588. doi: https://doi.org/10.1115/1.4015366
View articletitled, Discussion: “Some Observations on Chip Curl in the Metal-Cutting Process Under Orthogonal Cutting Conditions” (Hahn, R. S., 1953, Trans. ASME, 75, pp. 581–587)
Open the PDF for in another window
Topics: Cutting , Metal cutting
Discussion: “Some Observations on Chip Curl in the Metal-Cutting Process Under Orthogonal Cutting Conditions” (Hahn, R. S., 1953, Trans. ASME, 75, pp. 581–587)
Dimitri Kececioglu
Trans. ASME. May 1953, 75(4): 588–589. doi: https://doi.org/10.1115/1.4015367
View articletitled, Discussion: “Some Observations on Chip Curl in the Metal-Cutting Process Under Orthogonal Cutting Conditions” (Hahn, R. S., 1953, Trans. ASME, 75, pp. 581–587)
Open the PDF for in another window
Topics: Cutting , Metal cutting
Closure to “Discussions of ‘Some Observations on Chip Curl in the Metal-Cutting Process Under Orthogonal Cutting Conditions’” (1953, Trans. ASME, 75, pp. 587–589)
R. S. Hahn
Trans. ASME. May 1953, 75(4): 589–590. doi: https://doi.org/10.1115/1.4015368
View articletitled, Closure to “Discussions of ‘Some Observations on Chip Curl in the Metal-Cutting Process Under Orthogonal Cutting Conditions’” (1953, Trans. ASME, 75, pp. 587–589)
Open the PDF for in another window
Topics: Cutting , Metal cutting
Discussion: “Deformation Work Absorbed by the Workpiece During Metal Cutting” (Thomsen, E. G., Lapsley, Jr., J. T., and Grassi, R. C., 1953, Trans. ASME, 75, pp. 591–598)
R. S. Hahn
Trans. ASME. May 1953, 75(4): 598. doi: https://doi.org/10.1115/1.4015370
View articletitled, Discussion: “Deformation Work Absorbed by the Workpiece During Metal Cutting” (Thomsen, E. G., Lapsley, Jr., J. T., and Grassi, R. C., 1953, Trans. ASME, 75, pp. 591–598)
Open the PDF for in another window
Topics: Deformation , Metal cutting
Discussion: “Deformation Work Absorbed by the Workpiece During Metal Cutting” (Thomsen, E. G., Lapsley, Jr., J. T., and Grassi, R. C., 1953, Trans. ASME, 75, pp. 591–598)
E. K. Henriksen
Trans. ASME. May 1953, 75(4): 598–600. doi: https://doi.org/10.1115/1.4015371
View articletitled, Discussion: “Deformation Work Absorbed by the Workpiece During Metal Cutting” (Thomsen, E. G., Lapsley, Jr., J. T., and Grassi, R. C., 1953, Trans. ASME, 75, pp. 591–598)
Open the PDF for in another window
Topics: Deformation , Metal cutting
Discussion: “Deformation Work Absorbed by the Workpiece During Metal Cutting” (Thomsen, E. G., Lapsley, Jr., J. T., and Grassi, R. C., 1953, Trans. ASME, 75, pp. 591–598)
K. J. Trigger, B. T. Chao
Trans. ASME. May 1953, 75(4): 600–601. doi: https://doi.org/10.1115/1.4015372
View articletitled, Discussion: “Deformation Work Absorbed by the Workpiece During Metal Cutting” (Thomsen, E. G., Lapsley, Jr., J. T., and Grassi, R. C., 1953, Trans. ASME, 75, pp. 591–598)
Open the PDF for in another window
Topics: Deformation , Metal cutting
Discussion: “Deformation Work Absorbed by the Workpiece During Metal Cutting” (Thomsen, E. G., Lapsley, Jr., J. T., and Grassi, R. C., 1953, Trans. ASME, 75, pp. 591–598)
M. C. Shaw, K. L. Chien
Trans. ASME. May 1953, 75(4): 601–602. doi: https://doi.org/10.1115/1.4015373
View articletitled, Discussion: “Deformation Work Absorbed by the Workpiece During Metal Cutting” (Thomsen, E. G., Lapsley, Jr., J. T., and Grassi, R. C., 1953, Trans. ASME, 75, pp. 591–598)
Open the PDF for in another window
Topics: Deformation , Metal cutting
Closure to “Discussions of ‘Deformation Work Absorbed by the Workpiece During Metal Cutting’” (1953, Trans. ASME, 75, pp. 598–602)
E. G. Thomsen, J. T. Lapsley, Jr., R. C. Grassi
Trans. ASME. May 1953, 75(4): 602–603. doi: https://doi.org/10.1115/1.4015374
View articletitled, Closure to “Discussions of ‘Deformation Work Absorbed by the Workpiece During Metal Cutting’” (1953, Trans. ASME, 75, pp. 598–602)
Open the PDF for in another window
Topics: Deformation , Metals
Discussion: “Stress Relaxation in Compression of Rubber and Synthetic-Rubber Vulcanizates Immersed in Oil” (Beatty, J. R., and Juve, A. E., 1953, Trans. ASME, 75, pp. 605–611)
F. C. Thorn
Trans. ASME. May 1953, 75(4): 611–612. doi: https://doi.org/10.1115/1.4015376
View articletitled, Discussion: “Stress Relaxation in Compression of Rubber and Synthetic-Rubber Vulcanizates Immersed in Oil” (Beatty, J. R., and Juve, A. E., 1953, Trans. ASME, 75, pp. 605–611)
Open the PDF for in another window
Topics: Compression , Relaxation (Physics) , Rubber , Stress , Synthetic rubbers
Closure to “Discussion of ‘Stress Relaxation in Compression of Rubber and Synthetic-Rubber Vulcanizates Immersed in Oil’” (1953, Trans. ASME, 75, pp. 611–612)
J. R. Beatty, A. E. Juve
Trans. ASME. May 1953, 75(4): 612. doi: https://doi.org/10.1115/1.4015377
View articletitled, Closure to “Discussion of ‘Stress Relaxation in Compression of Rubber and Synthetic-Rubber Vulcanizates Immersed in Oil’” (1953, Trans. ASME, 75, pp. 611–612)
Open the PDF for in another window
Topics: Compression , Relaxation (Physics) , Rubber , Stress , Synthetic rubbers
Discussion: “Studies of Submergence Requirements of High-Specific-Speed Pumps” (Iversen, H. W., 1953, Trans. ASME, 75, pp. 635–638)
A. J. Stepanoff
Trans. ASME. May 1953, 75(4): 639–640. doi: https://doi.org/10.1115/1.4015381
View articletitled, Discussion: “Studies of Submergence Requirements of High-Specific-Speed Pumps” (Iversen, H. W., 1953, Trans. ASME, 75, pp. 635–638)
Open the PDF for in another window
Topics: Pumps
Discussion: “Studies of Submergence Requirements of High-Specific-Speed Pumps” (Iversen, H. W., 1953, Trans. ASME, 75, pp. 635–638)
R. Rankin
Trans. ASME. May 1953, 75(4): 640–641. doi: https://doi.org/10.1115/1.4015382
View articletitled, Discussion: “Studies of Submergence Requirements of High-Specific-Speed Pumps” (Iversen, H. W., 1953, Trans. ASME, 75, pp. 635–638)
Open the PDF for in another window
Topics: Pumps
Closure to “Discussions of ‘Studies of Submergence Requirements of High-Specific-Speed Pumps’” (1953, Trans. ASME, 75, pp. 639–641)
H. W. Iversen
Trans. ASME. May 1953, 75(4): 641. doi: https://doi.org/10.1115/1.4015383
View articletitled, Closure to “Discussions of ‘Studies of Submergence Requirements of High-Specific-Speed Pumps’” (1953, Trans. ASME, 75, pp. 639–641)
Open the PDF for in another window
Discussion: “Hydraulic Problems Encountered in Intake Structures of Vertical Wet-Pit Pumps and Methods Leading to Their Solution” (Fraser, W. H., 1953, Trans. ASME, 75, pp. 643–648)
D. W. R. Morgan, Jr.
Trans. ASME. May 1953, 75(4): 648–649. doi: https://doi.org/10.1115/1.4015385
View articletitled, Discussion: “Hydraulic Problems Encountered in Intake Structures of Vertical Wet-Pit Pumps and Methods Leading to Their Solution” (Fraser, W. H., 1953, Trans. ASME, 75, pp. 643–648)
Open the PDF for in another window
Topics: Pumps
Discussion: “Hydraulic Problems Encountered in Intake Structures of Vertical Wet-Pit Pumps and Methods Leading to Their Solution” (Fraser, W. H., 1953, Trans. ASME, 75, pp. 643–648)
D. R. Rankin
Trans. ASME. May 1953, 75(4): 649. doi: https://doi.org/10.1115/1.4015386
View articletitled, Discussion: “Hydraulic Problems Encountered in Intake Structures of Vertical Wet-Pit Pumps and Methods Leading to Their Solution” (Fraser, W. H., 1953, Trans. ASME, 75, pp. 643–648)
Open the PDF for in another window
Topics: Pumps
Discussion: “Hydraulic Problems Encountered in Intake Structures of Vertical Wet-Pit Pumps and Methods Leading to Their Solution” (Fraser, W. H., 1953, Trans. ASME, 75, pp. 643–648)
C. R. Wilderson
Trans. ASME. May 1953, 75(4): 649–652. doi: https://doi.org/10.1115/1.4015387
View articletitled, Discussion: “Hydraulic Problems Encountered in Intake Structures of Vertical Wet-Pit Pumps and Methods Leading to Their Solution” (Fraser, W. H., 1953, Trans. ASME, 75, pp. 643–648)
Open the PDF for in another window
Topics: Pumps
Closure to “Discussions of ‘Hydraulic Problems Encountered in Intake Structures of Vertical Wet-Pit Pumps and Methods Leading to Their Solution’” (1953, Trans. ASME, 75, pp. 648–652)
W. H. Fraser
Trans. ASME. May 1953, 75(4): 652. doi: https://doi.org/10.1115/1.4015388
View articletitled, Closure to “Discussions of ‘Hydraulic Problems Encountered in Intake Structures of Vertical Wet-Pit Pumps and Methods Leading to Their Solution’” (1953, Trans. ASME, 75, pp. 648–652)
Open the PDF for in another window
Topics: Pumps
All Issues
Effect of Power-Law Fluids Flow Structures on Germicides Disinfection Through Taylor–Couette Configuration
J. Fluids Eng (March 2024)
Numerical Studies on the Oil Film Thickness in the Case of Stratified Flow With Different Oil–Water Flow Combinations Through Sudden Contraction Tube
J. Fluids Eng (March 2024)
A Method to Determine Bubble Distribution in Liquid Using Data of Inverse Acoustical Scattering
J. Fluids Eng (March 2024)
Numerical Investigations of Turbulent Flow Through A 90-Degree Pipe Bend And Honeycomb Straightener
J. Fluids Eng
Localized Blowing for Near-Wake Flow and Vortical Structure Control in Turbulent Boundary Layers Over Periodic 2D Roughness
J. Fluids Eng
  • Online ISSN 1528-901X
  • Print ISSN 0098-2202

Journals

Conference Proceedings

eBooks

Resources

Opportunities

  • Crossref Logo
  • Crossref Open Funder Registry Logo
  • Crossref Open Cited-By Logo
  • Crossref Crossmark Logo
  • Crossref Similarity Check Logo
  • Chorus Logo
  • Counter Logo
  • Cope Logo
  • STM Logo
Copyright © 2023 The American Society of Mechanical Engineers
Close Modal
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal
This site uses cookies. By continuing to use our website, you are agreeing to our privacy policy.
Accept