Skip Nav Destination
Issues
August 1953
This article was originally published in
Transactions of the American Society of Mechanical Engineers
ISSN 0097-6822
In this Issue
Research Papers
Modern Trends in Hydraulic-Turbine Design in Europe
Trans. ASME. August 1953, 75(6): 975–988.
doi: https://doi.org/10.1115/1.4015500
Topics:
Design
,
Hydraulic turbines
,
Alloys
,
Turbines
,
Valves
Pressure Surges at Large Pump Installations
Trans. ASME. August 1953, 75(6): 995–1004.
doi: https://doi.org/10.1115/1.4015506
Pressure Distributions on the Blade of an Axial-Flow Propeller Pump
Trans. ASME. August 1953, 75(6): 1007–1012.
doi: https://doi.org/10.1115/1.4015511
Topics:
Axial flow
,
Blades
,
Pressure
,
Propellers
,
Pumps
,
Airfoils
,
Design
,
Flow (Dynamics)
,
Approximation
,
Chords (Trusses)
Laboratory Investigation of Superheater-Tubing Materials in Contact With Synthetic Combustion Atmospheres at 1350 F
Trans. ASME. August 1953, 75(6): 1015–1019.
doi: https://doi.org/10.1115/1.4015514
Topics:
Combustion
,
Superheaters
,
Tubing
,
Sulfur
,
Alloys
,
Alkali metals
,
Carbon monoxide
,
Coal
,
Corrosion
,
Natural gas
Resistance of Cast Fe-Cr-Ni Alloys to Corrosion in Oxidizing and Reducing Flue-Gas Atmospheres
Trans. ASME. August 1953, 75(6): 1021–1034.
doi: https://doi.org/10.1115/1.4015517
Topics:
Alloys
,
Corrosion
,
Flue gases
,
Sulfur
,
Bearings
,
Nickel
,
Temperature
,
Casting
,
Fluctuations (Physics)
,
Gases
Corrosion of Mercury-Boiler Tubes During Combustion of a Heavy Residual Oil
Trans. ASME. August 1953, 75(6): 1037–1049.
doi: https://doi.org/10.1115/1.4015520
Topics:
Boilers
,
Combustion
,
Corrosion
,
Fuels
,
Protective coatings
Thermal Shock and Other Comparison Tests of Austenitic and Ferritic Steels for Main Steam Piping—A Summary Report
Trans. ASME. August 1953, 75(6): 1051–1067.
doi: https://doi.org/10.1115/1.4015521
Topics:
Pipes
,
Steam
,
Steel
,
Thermal shock
,
Shock (Mechanics)
,
Temperature
,
Boilers
,
Casting
,
Composite materials
,
Creep
Metal-Cutting Chatter and Its Elimination
Trans. ASME. August 1953, 75(6): 1073–1078.
doi: https://doi.org/10.1115/1.4015526
Topics:
Chatter
,
Metal cutting
,
Feedback
,
Cutting
,
Dampers
,
Machine tools
,
Shear (Mechanics)
,
Skin
,
Stress
,
Temperature
A Lathe Test for the Evaluation of Cutting Fluids
Trans. ASME. August 1953, 75(6): 1081–1085.
doi: https://doi.org/10.1115/1.4015531
Power Required by Carbide-Tipped Face-Milling Cutters
Trans. ASME. August 1953, 75(6): 1087–1092.
doi: https://doi.org/10.1115/1.4015535
Topics:
Milling
Pulverized-Coal Gasification Ruhrgas Processes
Trans. ASME. August 1953, 75(6): 1095–1100.
doi: https://doi.org/10.1115/1.4015540
Topics:
Coal
,
Fuel gasification
,
Coke
,
Dust
,
Ovens
,
Firing
,
Industrial research
,
Pulsejets
,
Vortices
Controlled Internal-Contour Shielded-Root Welds Without Backing Rings
Trans. ASME. August 1953, 75(6): 1103–1110.
doi: https://doi.org/10.1115/1.4015544
Topics:
Arc welding
,
Dimensions
,
Metals
,
Pipes
,
Pressure
,
Steam
,
Welded joints
,
Welding
On the Solution of the Reynolds Equation for Slider-Bearing Lubrication—IV: Effect of Temperature on the Viscosity
Trans. ASME. August 1953, 75(6): 1117–1121.
doi: https://doi.org/10.1115/1.4015555
Topics:
Lubrication
,
Slider bearings
,
Temperature
,
Viscosity
,
Film thickness
,
Flow (Dynamics)
,
Leakage
,
Pressure
On the Solution of the Reynolds Equation for Slider-Bearing Lubrication—V: The Sector Thrust Bearing
Trans. ASME. August 1953, 75(6): 1125–1132.
doi: https://doi.org/10.1115/1.4015559
Topics:
Lubrication
,
Slider bearings
,
Thrust bearings
,
Leakage
,
Pressure
,
Approximation
,
Dimensions
,
Film thickness
,
Flow (Dynamics)
,
Friction
On the Solution of the Reynolds Equation for Slider-Bearing Lubrication—VI: The Parallel-Surface Slider Bearing Without Side Leakage
Trans. ASME. August 1953, 75(6): 1133–1136.
doi: https://doi.org/10.1115/1.4015560
Topics:
Leakage
,
Lubrication
,
Slider bearings
,
Temperature
,
Pressure
,
Density
,
Flow (Dynamics)
,
Lubricants
,
Viscosity
Experiments With Water-Lubricated Tapered-Land Thrust Bearings
Trans. ASME. August 1953, 75(6): 1137–1145.
doi: https://doi.org/10.1115/1.4015561
Topics:
Thrust bearings
,
Water
,
Stress
,
Bearings
,
Carbon
,
Design
,
Lubricants
,
Machinery
,
Viscosity
The Lubrication of Gyroscopes
Trans. ASME. August 1953, 75(6): 1147–1152.
doi: https://doi.org/10.1115/1.4015562
Topics:
Lubrication
,
Bearings
,
Lubricants
,
Rotors
,
Noise (Sound)
,
Failure
,
Instrumentation
,
Maintenance
,
Storage
,
Temperature
Contribution to the Theory of Oil Whip
Trans. ASME. August 1953, 75(6): 1153–1158.
doi: https://doi.org/10.1115/1.4015563
Topics:
Equations of motion
,
Fluid-dynamic forces
,
Pressure
,
Rotors
,
Whirls
Contributions to Hydraulic Control: 3—Pressure-Flow Relationships for 4-Way Valves
Trans. ASME. August 1953, 75(6): 1163–1169.
doi: https://doi.org/10.1115/1.4015570
Topics:
Flow (Dynamics)
,
Hydraulic control
,
Pressure
,
Valves
,
Stress
,
Flow control valves
,
Vacuum
Contributions to Hydraulic Control: 4—Notes on the Hydraulic Wheatstone Bridge
Trans. ASME. August 1953, 75(6): 1171–1173.
doi: https://doi.org/10.1115/1.4015572
Topics:
Bridges (Structures)
,
Hydraulic control
,
Electrical conductance
,
Flow (Dynamics)
,
Fluids
,
Pressure
,
Viscosity
Contributions to Hydraulic Control: 5—Lateral Forces on Hydraulic Pistons
Trans. ASME. August 1953, 75(6): 1175–1180.
doi: https://doi.org/10.1115/1.4015573
Topics:
Hydraulic control
,
Pistons
,
Friction
,
Geometry
,
Hydraulic equipment
,
Valves
On the Validity of Assumptions Made in Theories of Plastic Flow for Metals
Trans. ASME. August 1953, 75(6): 1181–1186.
doi: https://doi.org/10.1115/1.4015575
Topics:
Deformation
,
Metals
,
Stress
,
Flow (Dynamics)
,
Aluminum alloys
,
Plasticity
,
Pressure
,
Stress-strain relations
,
Tension
Heat Transfer to Molten Lead-Bismuth Eutectic in Turbulent Pipe Flow
Trans. ASME. August 1953, 75(6): 1191–1198.
doi: https://doi.org/10.1115/1.4015579
Topics:
Heat transfer
,
Pipe flow
,
Turbulence
,
Fluids
,
Gages
,
Heat flux
,
Momentum
,
Pipes
,
Reynolds number
,
Steel
Discussions and Closures
Discussion: “Modern Trends in Hydraulic-Turbine Design in Europe” (Bovet, G. A., 1953, Trans. ASME, 75, pp. 975–988)
Trans. ASME. August 1953, 75(6): 988–989.
doi: https://doi.org/10.1115/1.4015501
Topics:
Design
,
Hydraulic turbines
Discussion: “Modern Trends in Hydraulic-Turbine Design in Europe” (Bovet, G. A., 1953, Trans. ASME, 75, pp. 975–988)
Trans. ASME. August 1953, 75(6): 989–990.
doi: https://doi.org/10.1115/1.4015502
Topics:
Design
,
Hydraulic turbines
Discussion: “Modern Trends in Hydraulic-Turbine Design in Europe” (Bovet, G. A., 1953, Trans. ASME, 75, pp. 975–988)
Trans. ASME. August 1953, 75(6): 990–991.
doi: https://doi.org/10.1115/1.4015503
Topics:
Design
,
Hydraulic turbines
Discussion: “Modern Trends in Hydraulic-Turbine Design in Europe” (Bovet, G. A., 1953, Trans. ASME, 75, pp. 975–988)
Trans. ASME. August 1953, 75(6): 991.
doi: https://doi.org/10.1115/1.4015504
Topics:
Design
,
Hydraulic turbines
Closure to “Discussions of ‘Modern Trends in Hydraulic-Turbine Design in Europe’” (1953, Trans. ASME, 75, pp. 988–991)
Trans. ASME. August 1953, 75(6): 991–993.
doi: https://doi.org/10.1115/1.4015505
Topics:
Design
,
Hydraulic turbines
Discussion: “Pressure Surges at Large Pump Installations” (Parmakian, John, 1953, Trans. ASME, 75, pp. 995–1004)
Trans. ASME. August 1953, 75(6): 1004.
doi: https://doi.org/10.1115/1.4015507
Discussion: “Pressure Surges at Large Pump Installations” (Parmakian, John, 1953, Trans. ASME, 75, pp. 995–1004)
Trans. ASME. August 1953, 75(6): 1004–1005.
doi: https://doi.org/10.1115/1.4015508
Discussion: “Pressure Surges at Large Pump Installations” (Parmakian, John, 1953, Trans. ASME, 75, pp. 995–1004)
Trans. ASME. August 1953, 75(6): 1005.
doi: https://doi.org/10.1115/1.4015509
Closure to “Discussions of ‘Pressure Surges at Large Pump Installations’” (1953, Trans. ASME, 75, pp. 1004–1005)
Trans. ASME. August 1953, 75(6): 1005–1006.
doi: https://doi.org/10.1115/1.4015510
Discussion: “Pressure Distributions on the Blade of an Axial-Flow Propeller Pump” (Morelli, D. A., and Bowerman, R. D., 1953, Trans. ASME, 75, pp. 1007–1012)
Trans. ASME. August 1953, 75(6): 1012–1013.
doi: https://doi.org/10.1115/1.4015512
Topics:
Axial flow
,
Blades
,
Pressure
,
Propellers
,
Pumps
Closure to “Discussion of ‘Pressure Distributions on the Blade of an Axial-Flow Propeller Pump’” (1953, Trans. ASME, 75, pp. 1012–1013)
Trans. ASME. August 1953, 75(6): 1013.
doi: https://doi.org/10.1115/1.4015513
Topics:
Axial flow
,
Blades
,
Pressure
,
Propellers
Discussion: “Laboratory Investigation of Superheater-Tubing Materials in Contact With Synthetic Combustion Atmospheres at 1350 F” (Slunder, C. J., Hall, A. M., and Jackson, J. H., 1953, Trans. ASME, 75, pp. 1015–1019)
Trans. ASME. August 1953, 75(6): 1019.
doi: https://doi.org/10.1115/1.4015515
Topics:
Combustion
,
Superheaters
,
Tubing
Closure to “Discussion of ‘Laboratory Investigation of Superheater-Tubing Materials in Contact With Synthetic Combustion Atmospheres at 1350 F’” (1953, Trans. ASME, 75, p. 1019)
Trans. ASME. August 1953, 75(6): 1019.
doi: https://doi.org/10.1115/1.4015516
Topics:
Combustion
,
Superheaters
,
Tubing
Discussion: “Resistance of Cast Fe-Cr-Ni Alloys to Corrosion in Oxidizing and Reducing Flue-Gas Atmospheres” (Jackson, J. H., Slunder, C. J., Harder, O. E., and Gow, J. T., 1953, Trans. ASME, 75, pp. 1021–1034)
Trans. ASME. August 1953, 75(6): 1034.
doi: https://doi.org/10.1115/1.4015518
Topics:
Alloys
,
Corrosion
,
Flue gases
Closure to “Discussion of ‘Resistance of Cast Fe-Cr-Ni Alloys to Corrosion in Oxidizing and Reducing Flue-Gas Atmospheres’” (1953, Trans. ASME, 75, p. 1034)
Trans. ASME. August 1953, 75(6): 1034–1035.
doi: https://doi.org/10.1115/1.4015519
Topics:
Alloys
,
Corrosion
,
Flue gases
Discussion: “Thermal Shock and Other Comparison Tests of Austenitic and Ferritic Steels for Main Steam Piping—A Summary Report” (Stewart, W. C., and Schreitz, W. G., 1953, Trans. ASME, 75, pp. 1051–1067)
Trans. ASME. August 1953, 75(6): 1068–1069.
doi: https://doi.org/10.1115/1.4015522
Topics:
Pipes
,
Steam
,
Steel
,
Thermal shock
Discussion: “Thermal Shock and Other Comparison Tests of Austenitic and Ferritic Steels for Main Steam Piping—A Summary Report” (Stewart, W. C., and Schreitz, W. G., 1953, Trans. ASME, 75, pp. 1051–1067)
Trans. ASME. August 1953, 75(6): 1069–1070.
doi: https://doi.org/10.1115/1.4015523
Topics:
Pipes
,
Steam
,
Steel
,
Thermal shock
Discussion: “Thermal Shock and Other Comparison Tests of Austenitic and Ferritic Steels for Main Steam Piping—A Summary Report” (Stewart, W. C., and Schreitz, W. G., 1953, Trans. ASME, 75, pp. 1051–1067)
Trans. ASME. August 1953, 75(6): 1070–1071.
doi: https://doi.org/10.1115/1.4015524
Topics:
Pipes
,
Steam
,
Steel
,
Thermal shock
Closure to “Discussions of ‘Thermal Shock and Other Comparison Tests of Austenitic and Ferritic Steels for Main Steam Piping—A Summary Report’” (1953, Trans. ASME, 75, pp. 1068–1071)
Trans. ASME. August 1953, 75(6): 1071–1072.
doi: https://doi.org/10.1115/1.4015525
Topics:
Pipes
,
Steam
,
Steel
,
Thermal shock
Discussion: “Metal-Cutting Chatter and Its Elimination” (Hahn, R. S., 1953, Trans. ASME, 75, pp. 1073–1078)
Trans. ASME. August 1953, 75(6): 1078–1079.
doi: https://doi.org/10.1115/1.4015527
Topics:
Chatter
,
Metal cutting
Discussion: “Metal-Cutting Chatter and Its Elimination” (Hahn, R. S., 1953, Trans. ASME, 75, pp. 1073–1078)
Trans. ASME. August 1953, 75(6): 1079–1080.
doi: https://doi.org/10.1115/1.4015528
Topics:
Chatter
,
Metal cutting
Discussion: “Metal-Cutting Chatter and Its Elimination” (Hahn, R. S., 1953, Trans. ASME, 75, pp. 1073–1078)
Trans. ASME. August 1953, 75(6): 1080.
doi: https://doi.org/10.1115/1.4015529
Topics:
Chatter
,
Metal cutting
Closure to “Discussions of ‘Metal-Cutting Chatter and Its Elimination’” (1953, Trans. ASME, 75, pp. 1078–1080)
Trans. ASME. August 1953, 75(6): 1080.
doi: https://doi.org/10.1115/1.4015530
Topics:
Chatter
,
Metal cutting
Closure to “Discussions of ‘A Lathe Test for the Evaluation of Cutting Fluids’” (1953, Trans. ASME, 75, pp. 1085–1086)
Trans. ASME. August 1953, 75(6): 1086.
doi: https://doi.org/10.1115/1.4015534
Topics:
Cutting
Discussion: “Power Required by Carbide-Tipped Face-Milling Cutters” (Gilbert, W. W., Boston, O. W., and Siekmann, H. J., 1953, Trans. ASME, 75, pp. 1087–1092)
Trans. ASME. August 1953, 75(6): 1092.
doi: https://doi.org/10.1115/1.4015536
Topics:
Milling
Discussion: “Power Required by Carbide-Tipped Face-Milling Cutters” (Gilbert, W. W., Boston, O. W., and Siekmann, H. J., 1953, Trans. ASME, 75, pp. 1087–1092)
Trans. ASME. August 1953, 75(6): 1092–1093.
doi: https://doi.org/10.1115/1.4015537
Topics:
Milling
Discussion: “Power Required by Carbide-Tipped Face-Milling Cutters” (Gilbert, W. W., Boston, O. W., and Siekmann, H. J., 1953, Trans. ASME, 75, pp. 1087–1092)
Trans. ASME. August 1953, 75(6): 1093.
doi: https://doi.org/10.1115/1.4015538
Topics:
Milling
Closure to “Discussions of ‘Power Required by Carbide-Tipped Face-Milling Cutters’” (1953, Trans. ASME, 75, pp. 1092–1093)
Trans. ASME. August 1953, 75(6): 1093.
doi: https://doi.org/10.1115/1.4015539
Topics:
Milling
Discussion: “Pulverized-Coal Gasification Ruhrgas Processes” (Traenckner, Kurt, 1953, Trans. ASME, 75, pp. 1095–1100)
Trans. ASME. August 1953, 75(6): 1100–1101.
doi: https://doi.org/10.1115/1.4015541
Topics:
Coal
,
Fuel gasification
Discussion: “Pulverized-Coal Gasification Ruhrgas Processes” (Traenckner, Kurt, 1953, Trans. ASME, 75, pp. 1095–1100)
Trans. ASME. August 1953, 75(6): 1101.
doi: https://doi.org/10.1115/1.4015542
Topics:
Coal
,
Fuel gasification
Closure to “Discussions of ‘Pulverized-Coal Gasification Ruhrgas Processes’” (1953, Trans. ASME, 75, pp. 1100–1101)
Trans. ASME. August 1953, 75(6): 1101.
doi: https://doi.org/10.1115/1.4015543
Topics:
Coal
,
Fuel gasification
Discussion: “Controlled Internal-Contour Shielded-Root Welds Without Backing Rings” (Diehl, Charles, Blumberg, H. S., and Benz, Jr., W. G., 1953, Trans. ASME, 75, pp. 1103–1110)
Trans. ASME. August 1953, 75(6): 1110–1111.
doi: https://doi.org/10.1115/1.4015545
Topics:
Welded joints
Discussion: “Controlled Internal-Contour Shielded-Root Welds Without Backing Rings” (Diehl, Charles, Blumberg, H. S., and Benz, Jr., W. G., 1953, Trans. ASME, 75, pp. 1103–1110)
Trans. ASME. August 1953, 75(6): 1111–1112.
doi: https://doi.org/10.1115/1.4015547
Topics:
Welded joints
Discussion: “Controlled Internal-Contour Shielded-Root Welds Without Backing Rings” (Diehl, Charles, Blumberg, H. S., and Benz, Jr., W. G., 1953, Trans. ASME, 75, pp. 1103–1110)
Trans. ASME. August 1953, 75(6): 1113–1114.
doi: https://doi.org/10.1115/1.4015552
Topics:
Welded joints
Closure to “Discussions of ‘Controlled Internal-Contour Shielded-Root Welds Without Backing Rings’” (1953, Trans. ASME, 75, pp. 1110–1114)
Trans. ASME. August 1953, 75(6): 1114–1115.
doi: https://doi.org/10.1115/1.4015554
Topics:
Welded joints
Discussion: “On the Solution of the Reynolds Equation for Slider-Bearing Lubrication—IV: Effect of Temperature on the Viscosity” (Osterle, F., Charnes, A., and Saibel, E., 1953, Trans. ASME, 75, pp. 1117–1121)
Trans. ASME. August 1953, 75(6): 1121–1122.
doi: https://doi.org/10.1115/1.4015556
Topics:
Lubrication
,
Slider bearings
,
Temperature
,
Viscosity
Discussion: “On the Solution of the Reynolds Equation for Slider-Bearing Lubrication—IV: Effect of Temperature on the Viscosity” (Osterle, F., Charnes, A., and Saibel, E., 1953, Trans. ASME, 75, pp. 1117–1121)
Trans. ASME. August 1953, 75(6): 1122–1123.
doi: https://doi.org/10.1115/1.4015557
Topics:
Lubrication
,
Slider bearings
,
Temperature
,
Viscosity
Closure to “Discussions of ‘On the Solution of the Reynolds Equation for Slider-Bearing Lubrication—IV: Effect of Temperature on the Viscosity’” (1953, Trans. ASME, 75, pp. 1121–1123)
Trans. ASME. August 1953, 75(6): 1123.
doi: https://doi.org/10.1115/1.4015558
Topics:
Lubrication
,
Slider bearings
,
Temperature
Discussion: “Contribution to the Theory of Oil Whip” (Poritsky, H., 1953, Trans. ASME, 75, pp. 1153–1158)
Trans. ASME. August 1953, 75(6): 1158–1159.
doi: https://doi.org/10.1115/1.4015564
Discussion: “Contribution to the Theory of Oil Whip” (Poritsky, H., 1953, Trans. ASME, 75, pp. 1153–1158)
Trans. ASME. August 1953, 75(6): 1159.
doi: https://doi.org/10.1115/1.4015565
Discussion: “Contribution to the Theory of Oil Whip” (Poritsky, H., 1953, Trans. ASME, 75, pp. 1153–1158)
Trans. ASME. August 1953, 75(6): 1159.
doi: https://doi.org/10.1115/1.4015566
Discussion: “Contribution to the Theory of Oil Whip” (Poritsky, H., 1953, Trans. ASME, 75, pp. 1153–1158)
Trans. ASME. August 1953, 75(6): 1159–1160.
doi: https://doi.org/10.1115/1.4015567
Discussion: “Contribution to the Theory of Oil Whip” (Poritsky, H., 1953, Trans. ASME, 75, pp. 1153–1158)
Trans. ASME. August 1953, 75(6): 1160.
doi: https://doi.org/10.1115/1.4015568
Closure to “Discussions of ‘Contribution to the Theory of Oil Whip’” (1953, Trans. ASME, 75, pp. 1158–1160)
Trans. ASME. August 1953, 75(6): 1160–1161.
doi: https://doi.org/10.1115/1.4015569
Discussion: “Contributions to Hydraulic Control: 3—Pressure-Flow Relationships for 4-Way Valves” (Blackburn, J. F., 1953, Trans. ASME, 75, pp. 1163–1169)
Trans. ASME. August 1953, 75(6): 1169–1170.
doi: https://doi.org/10.1115/1.4015571
Topics:
Flow (Dynamics)
,
Hydraulic control
,
Pressure
,
Valves
Discussion: “Contributions to Hydraulic Control: 5—Lateral Forces on Hydraulic Pistons” (Blackburn, J. F., 1953, Trans. ASME, 75, pp. 1175–1180)
Trans. ASME. August 1953, 75(6): 1180.
doi: https://doi.org/10.1115/1.4015574
Topics:
Hydraulic control
,
Pistons
Discussion: “On the Validity of Assumptions Made in Theories of Plastic Flow for Metals” (Marin, Joseph, and Hu, L. W., 1953, Trans. ASME, 75, pp. 1181–1186)
Trans. ASME. August 1953, 75(6): 1186–1187.
doi: https://doi.org/10.1115/1.4015576
Topics:
Deformation
,
Metals
Discussion: “On the Validity of Assumptions Made in Theories of Plastic Flow for Metals” (Marin, Joseph, and Hu, L. W., 1953, Trans. ASME, 75, pp. 1181–1186)
Trans. ASME. August 1953, 75(6): 1187–1189.
doi: https://doi.org/10.1115/1.4015577
Topics:
Deformation
,
Metals
Closure to “Discussions of ‘On the Validity of Assumptions Made in Theories of Plastic Flow for Metals’” (1953, Trans. ASME, 75, pp. 1186–1189)
Trans. ASME. August 1953, 75(6): 1189–1190.
doi: https://doi.org/10.1115/1.4015578
Topics:
Deformation
Email alerts
RSS Feeds
Prediction and Validation of Flow Properties in Porous Lattice Structures
J. Fluids Eng (April 2023)
A Study of the Velocity Field During Mitigation of Vortex Breakdown in Model Francis Turbine at High Load
J. Fluids Eng (April 2023)
Numerical Studies of Bubbles in Swirling Channel Flows
J. Fluids Eng (April 2023)
