Skip Nav Destination
Issues
August 1957
This article was originally published in
Transactions of the American Society of Mechanical Engineers
ISSN 0097-6822
In this Issue
Research Papers
Properties of Misaligned Journal Bearings
Trans. ASME. August 1957, 79(6): 1205–1211.
doi: https://doi.org/10.1115/1.4013265
Topics:
Journal bearings
,
Bearings
,
Lubrication
Analysis of Journal Bearings With Arbitrary Load Vector
Trans. ASME. August 1957, 79(6): 1213–1217.
doi: https://doi.org/10.1115/1.4013269
Topics:
Journal bearings
,
Stress
,
Bearings
,
Flow (Dynamics)
,
Lubricants
The Fluid Dynamic Theory of Gas-Lubricated Bearings
Trans. ASME. August 1957, 79(6): 1218–1223.
doi: https://doi.org/10.1115/1.4013270
Topics:
Bearings
,
Fluids
,
Pressure
,
Differential equations
,
Fluid mechanics
,
Gas bearings
,
Journal bearings
,
Slider bearings
,
Stress
Heat-Transfer Effects in Hydrostatic Thrust-Bearing Lubrication
Trans. ASME. August 1957, 79(6): 1225–1228.
doi: https://doi.org/10.1115/1.4013274
Topics:
Heat transfer
,
Hydrostatics
,
Lubrication
,
Thrust bearings
,
Bearings
,
Lubricants
,
Temperature
,
Temperature distribution
On the Theory of Grease-Lubricated Thrust Bearings
Trans. ASME. August 1957, 79(6): 1229–1234.
doi: https://doi.org/10.1115/1.4013275
Topics:
Thrust bearings
,
Deformation
,
Design
,
Engineers
,
Lubrication
,
Shear stress
,
Steady state
,
Stress
Predominant-Peak Surface Roughness, a Criterion for Minimum Hydrodynamic Oil-Film Thickness of Short Journal Bearings
Trans. ASME. August 1957, 79(6): 1235–1241.
doi: https://doi.org/10.1115/1.4013276
Topics:
Journal bearings
,
Surface roughness
,
Bearings
,
Lubrication
Statistical Analysis of a Wear Process
Trans. ASME. August 1957, 79(6): 1242–1246.
doi: https://doi.org/10.1115/1.4013277
Topics:
Statistical analysis
,
Wear
,
Metals
,
Oxidation
Testing Dynamically Loaded Bearings—I: A Short History of Bearing Test Machines
Trans. ASME. August 1957, 79(6): 1247–1255.
doi: https://doi.org/10.1115/1.4013280
Topics:
Bearings
,
Machinery
,
Testing
,
Dynamic testing (Materials)
Testing Dynamically Loaded Bearings—II: A Diesel-Engine Bearing Test Machine
Trans. ASME. August 1957, 79(6): 1260–1265.
doi: https://doi.org/10.1115/1.4013287
Universal Bearing Tester
Trans. ASME. August 1957, 79(6): 1267–1274.
doi: https://doi.org/10.1115/1.4013291
Cavitation Characteristics of Gate Valves and Globe Valves Used as Flow Regulators Under Heads Up to About 125 Feet
Trans. ASME. August 1957, 79(6): 1275–1281.
doi: https://doi.org/10.1115/1.4013294
Topics:
Cavitation
,
Flow (Dynamics)
,
Gates (Closures)
,
Valves
,
Damage
,
Pipes
,
Pressure
,
Design
,
Irrigation (Agriculture)
,
Jets
A Comparison of Hydraulic and Pneumatic Accessory Power Generation
Trans. ASME. August 1957, 79(6): 1284–1289.
doi: https://doi.org/10.1115/1.4013299
Topics:
Aircraft
,
Compressors
,
Energy generation
,
Engines
,
Fuel consumption
,
Hydraulic drive systems
,
Hydraulic pumps
,
Hydraulics
,
Motors
,
Thrust
Drag-Turbine Performance
Trans. ASME. August 1957, 79(6): 1291–1302.
doi: https://doi.org/10.1115/1.4013301
Topics:
Drag (Fluid dynamics)
,
Turbines
,
Accounting
,
Design
,
Reliability
,
Wheels
Kinematic Analysis and Synthesis Using Collineation-Axis Equations
Trans. ASME. August 1957, 79(6): 1305–1311.
doi: https://doi.org/10.1115/1.4013305
Topics:
Kinematic analysis
,
Levers
On the Adiabatic Couette Flow of a Compressible Fluid
Trans. ASME. August 1957, 79(6): 1313–1316.
doi: https://doi.org/10.1115/1.4013310
Topics:
Flow (Dynamics)
,
Fluids
,
Pressure
,
Bearings
,
Plates (structures)
,
Hydrostatic pressure
,
Temperature
,
Wedges
Curved Beams With Eccentric Boundaries
Trans. ASME. August 1957, 79(6): 1317–1321.
doi: https://doi.org/10.1115/1.4013311
Graphical Shoe-Brake Analysis
Trans. ASME. August 1957, 79(6): 1322–1327.
doi: https://doi.org/10.1115/1.4013314
Topics:
Brakes
Effects of Complex Stress-Time Cycles on the Fatigue Properties of Metals
Trans. ASME. August 1957, 79(6): 1329–1336.
doi: https://doi.org/10.1115/1.4013318
Topics:
Cycles
,
Fatigue properties
,
Metals
,
Stress
,
Design methodology
Fatigue of Metals Under Combinations of Stresses
Trans. ASME. August 1957, 79(6): 1337–1347.
doi: https://doi.org/10.1115/1.4013320
Topics:
Fatigue
,
Metals
,
Stress
,
Shear stress
,
Anisotropy
,
Compression
,
Crack propagation
,
Design
,
Failure
,
Fatigue cracks
Power From Solar Energy
Trans. ASME. August 1957, 79(6): 1349–1358.
doi: https://doi.org/10.1115/1.4013323
Topics:
Solar energy
,
Cycles
,
Coatings
,
Condensers (steam plant)
,
Cutting
,
Engines
,
Flat plates
,
Fossil fuels
,
Nuclear power
,
Solar radiation
Estimating Partial-Load Performance of Large Reheat Turbine-Generator Units
Trans. ASME. August 1957, 79(6): 1360–1368.
doi: https://doi.org/10.1115/1.4013327
Topics:
Stress
,
Turbogenerators
,
Heat
,
Steam
Eight Years of Experience With Austenitic Steel Piping Materials at Elevated Steam Conditions
Trans. ASME. August 1957, 79(6): 1371–1375.
doi: https://doi.org/10.1115/1.4013332
Topics:
Pipes
,
Steam
,
Steel
,
Power stations
,
Welding
Metallurgical Considerations of Main Steam Piping for High-Temperature, High-Pressure Service
Trans. ASME. August 1957, 79(6): 1377–1391.
doi: https://doi.org/10.1115/1.4013335
Topics:
High pressure (Physics)
,
High temperature
,
Pipes
,
Steam
,
Alloys
,
Design
,
Eddystone
,
High temperature steam
,
Power stations
,
Steel
Austenitic Steels in High-Temperature Steam Piping
Trans. ASME. August 1957, 79(6): 1398–1409.
doi: https://doi.org/10.1115/1.4013346
Topics:
High temperature steam
,
Pipes
,
Steel
,
Temperature
,
Turbines
Engineering the Eddystone Plant for 5000-Lb 1200-Deg Steam
Trans. ASME. August 1957, 79(6): 1410–1429.
doi: https://doi.org/10.1115/1.4013347
Topics:
Eddystone
,
Steam
,
Boilers
,
Design
,
Feedwater
,
Pipes
,
Plant design
,
Power stations
,
Pressure
,
Quality control
The Eddystone Superpressure Unit
Trans. ASME. August 1957, 79(6): 1431–1446.
doi: https://doi.org/10.1115/1.4013350
Topics:
Eddystone
Engineering the Eddystone Steam Generator for 5000-Psig, 1200-F Steam
Trans. ASME. August 1957, 79(6): 1447–1457.
doi: https://doi.org/10.1115/1.4013351
Topics:
Boilers
,
Eddystone
,
Steam
,
Control systems
,
Design
Discussions and Closures
Discussion: “Properties of Misaligned Journal Bearings” (DuBois, G. B., Ocvirk, F. W., and Wehe, R. L., 1957, Trans. ASME, 79, pp. 1205–1211)
Trans. ASME. August 1957, 79(6): 1211.
doi: https://doi.org/10.1115/1.4013266
Topics:
Journal bearings
Discussion: “Properties of Misaligned Journal Bearings” (DuBois, G. B., Ocvirk, F. W., and Wehe, R. L., 1957, Trans. ASME, 79, pp. 1205–1211)
Trans. ASME. August 1957, 79(6): 1211–1212.
doi: https://doi.org/10.1115/1.4013267
Topics:
Journal bearings
Closure to “Discussions of ‘Properties of Misaligned Journal Bearings’” (1957, Trans. ASME, 79, pp. 1211–1212)
Trans. ASME. August 1957, 79(6): 1212.
doi: https://doi.org/10.1115/1.4013268
Discussion: “The Fluid Dynamic Theory of Gas-Lubricated Bearings” (Ausman, J. S., 1957, Trans. ASME, 79, pp. 1218–1223)
Trans. ASME. August 1957, 79(6): 1223–1224.
doi: https://doi.org/10.1115/1.4013271
Discussion: “The Fluid Dynamic Theory of Gas-Lubricated Bearings” (Ausman, J. S., 1957, Trans. ASME, 79, pp. 1218–1223)
Trans. ASME. August 1957, 79(6): 1224.
doi: https://doi.org/10.1115/1.4013272
Closure to “Discussions of ‘The Fluid Dynamic Theory of Gas-Lubricated Bearings’” (1957, Trans. ASME, 79, pp. 1223–1224)
Trans. ASME. August 1957, 79(6): 1224.
doi: https://doi.org/10.1115/1.4013273
Topics:
Fluids
Discussion: “Statistical Analysis of a Wear Process” (Rightmire, B. G., 1957, Trans. ASME, 79, pp. 1242–1246)
Trans. ASME. August 1957, 79(6): 1246.
doi: https://doi.org/10.1115/1.4013278
Topics:
Statistical analysis
,
Wear
Closure to “Discussion of ‘Statistical Analysis of a Wear Process’” (1957, Trans. ASME, 79, p. 1246)
Trans. ASME. August 1957, 79(6): 1246.
doi: https://doi.org/10.1115/1.4013279
Topics:
Statistical analysis
,
Wear
Discussion: “Testing Dynamically Loaded Bearings—I: A Short History of Bearing Test Machines” (Hersey, M. D., and Snapp, R. B., 1957, Trans. ASME, 79, pp. 1247–1255)
Trans. ASME. August 1957, 79(6): 1256–1257.
doi: https://doi.org/10.1115/1.4013281
Discussion: “Testing Dynamically Loaded Bearings—I: A Short History of Bearing Test Machines” (Hersey, M. D., and Snapp, R. B., 1957, Trans. ASME, 79, pp. 1247–1255)
Trans. ASME. August 1957, 79(6): 1257–1258.
doi: https://doi.org/10.1115/1.4013284
Closure to “Discussions of ‘Testing Dynamically Loaded Bearings—I: A Short History of Bearing Test Machines’” (1957, Trans. ASME, 79, pp. 1256–1258)
Trans. ASME. August 1957, 79(6): 1258–1259.
doi: https://doi.org/10.1115/1.4013286
Discussion: “Testing Dynamically Loaded Bearings—II: A Diesel-Engine Bearing Test Machine” (Snapp, R. B., and Hersey, M. D., 1957, Trans. ASME, 79, pp. 1260–1265)
Trans. ASME. August 1957, 79(6): 1265–1266.
doi: https://doi.org/10.1115/1.4013288
Topics:
Bearings
,
Diesel engines
,
Machinery
,
Testing
Discussion: “Testing Dynamically Loaded Bearings—II: A Diesel-Engine Bearing Test Machine” (Snapp, R. B., and Hersey, M. D., 1957, Trans. ASME, 79, pp. 1260–1265)
Trans. ASME. August 1957, 79(6): 1266.
doi: https://doi.org/10.1115/1.4013289
Topics:
Bearings
,
Diesel engines
,
Machinery
,
Testing
Closure to “Discussions of ‘Testing Dynamically Loaded Bearings—II: A Diesel-Engine Bearing Test Machine’” (1957, Trans. ASME, 79, pp. 1265–1266)
Trans. ASME. August 1957, 79(6): 1266.
doi: https://doi.org/10.1115/1.4013290
Topics:
Bearings
,
Diesel engines
,
Testing
Discussion: “Universal Bearing Tester” (Pigott, R. J. S., and Walsh, B. R., 1957, Trans. ASME, 79, pp. 1267–1274)
Trans. ASME. August 1957, 79(6): 1274.
doi: https://doi.org/10.1115/1.4013292
Topics:
Bearings
Closure to “Discussion of ‘Universal Bearing Tester’” (1957, Trans. ASME, 79, p. 1274)
Trans. ASME. August 1957, 79(6): 1274.
doi: https://doi.org/10.1115/1.4013293
Topics:
Bearings
Discussion: “Cavitation Characteristics of Gate Valves and Globe Valves Used as Flow Regulators Under Heads Up to About 125 Feet” (Ball, J. W., 1957, Trans. ASME, 79, pp. 1275–1281)
Trans. ASME. August 1957, 79(6): 1281–1282.
doi: https://doi.org/10.1115/1.4013295
Topics:
Cavitation
,
Flow (Dynamics)
,
Gates (Closures)
,
Valves
Discussion: “Cavitation Characteristics of Gate Valves and Globe Valves Used as Flow Regulators Under Heads Up to About 125 Feet” (Ball, J. W., 1957, Trans. ASME, 79, pp. 1275–1281)
Trans. ASME. August 1957, 79(6): 1282.
doi: https://doi.org/10.1115/1.4013296
Topics:
Cavitation
,
Flow (Dynamics)
,
Gates (Closures)
,
Valves
Discussion: “Cavitation Characteristics of Gate Valves and Globe Valves Used as Flow Regulators Under Heads Up to About 125 Feet” (Ball, J. W., 1957, Trans. ASME, 79, pp. 1275–1281)
Trans. ASME. August 1957, 79(6): 1282–1283.
doi: https://doi.org/10.1115/1.4013297
Topics:
Cavitation
,
Flow (Dynamics)
,
Gates (Closures)
,
Valves
Closure to “Discussions of ‘Cavitation Characteristics of Gate Valves and Globe Valves Used as Flow Regulators Under Heads Up to About 125 Feet’” (1957, Trans. ASME, 79, pp. 1281–1283)
Trans. ASME. August 1957, 79(6): 1283.
doi: https://doi.org/10.1115/1.4013298
Topics:
Cavitation
,
Flow (Dynamics)
,
Gates (Closures)
,
Valves
Discussion: “A Comparison of Hydraulic and Pneumatic Accessory Power Generation” (Brown, E. I., 1957, Trans. ASME, 79, pp. 1284–1289)
Trans. ASME. August 1957, 79(6): 1290.
doi: https://doi.org/10.1115/1.4013300
Topics:
Energy generation
Discussion: “Drag-Turbine Performance” (Baljé, O. E., 1957, Trans. ASME, 79, pp. 1291–1302)
Trans. ASME. August 1957, 79(6): 1302.
doi: https://doi.org/10.1115/1.4013302
Topics:
Drag (Fluid dynamics)
,
Turbines
Discussion: “Drag-Turbine Performance” (Baljé, O. E., 1957, Trans. ASME, 79, pp. 1291–1302)
Trans. ASME. August 1957, 79(6): 1302–1303.
doi: https://doi.org/10.1115/1.4013303
Topics:
Drag (Fluid dynamics)
,
Turbines
Closure to “Discussions of ‘Drag-Turbine Performance’” (1957, Trans. ASME, 79, pp. 1302–1303)
Trans. ASME. August 1957, 79(6): 1303–1304.
doi: https://doi.org/10.1115/1.4013304
Topics:
Drag (Fluid dynamics)
,
Turbines
Discussion: “Kinematic Analysis and Synthesis Using Collineation-Axis Equations” (Carter, W. J., 1957, Trans. ASME, 79, pp. 1305–1311)
Trans. ASME. August 1957, 79(6): 1312.
doi: https://doi.org/10.1115/1.4013306
Topics:
Kinematic analysis
Discussion: “Kinematic Analysis and Synthesis Using Collineation-Axis Equations” (Carter, W. J., 1957, Trans. ASME, 79, pp. 1305–1311)
Trans. ASME. August 1957, 79(6): 1312.
doi: https://doi.org/10.1115/1.4013307
Topics:
Kinematic analysis
Discussion: “Kinematic Analysis and Synthesis Using Collineation-Axis Equations” (Carter, W. J., 1957, Trans. ASME, 79, pp. 1305–1311)
Trans. ASME. August 1957, 79(6): 1312.
doi: https://doi.org/10.1115/1.4013308
Topics:
Kinematic analysis
Closure to “Discussions of ‘Kinematic Analysis and Synthesis Using Collineation-Axis Equations’” (1957, Trans. ASME, 79, p. 1312)
Trans. ASME. August 1957, 79(6): 1312.
doi: https://doi.org/10.1115/1.4013309
Topics:
Kinematic analysis
Discussion: “Curved Beams With Eccentric Boundaries” (Vidosic, J. P., Bogardus, F. J., and Durden, J. C., 1957, Trans. ASME, 79, pp. 1317–1321)
Trans. ASME. August 1957, 79(6): 1321.
doi: https://doi.org/10.1115/1.4013312
Closure to “Discussion of ‘Curved Beams With Eccentric Boundaries’” (1957, Trans. ASME, 79, p. 1321)
Trans. ASME. August 1957, 79(6): 1321.
doi: https://doi.org/10.1115/1.4013313
Discussion: “Graphical Shoe-Brake Analysis” (Fazekas, G. A. G., 1957, Trans. ASME, 79, pp. 1322–1327)
Trans. ASME. August 1957, 79(6): 1327.
doi: https://doi.org/10.1115/1.4013315
Topics:
Brakes
Discussion: “Graphical Shoe-Brake Analysis” (Fazekas, G. A. G., 1957, Trans. ASME, 79, pp. 1322–1327)
Trans. ASME. August 1957, 79(6): 1327.
doi: https://doi.org/10.1115/1.4013316
Topics:
Brakes
Closure to “Discussions of ‘Graphical Shoe-Brake Analysis’” (1957, Trans. ASME, 79, p. 1327)
Trans. ASME. August 1957, 79(6): 1328.
doi: https://doi.org/10.1115/1.4013317
Topics:
Brakes
Discussion: “Effects of Complex Stress-Time Cycles on the Fatigue Properties of Metals” (Starkey, W. L., and Marco, S. M., 1957, Trans. ASME, 79, pp. 1329–1336)
Trans. ASME. August 1957, 79(6): 1336.
doi: https://doi.org/10.1115/1.4013319
Topics:
Cycles
,
Fatigue properties
,
Metals
,
Stress
Discussion: “Fatigue of Metals Under Combinations of Stresses” (Findley, W. N., 1957, Trans. ASME, 79, pp. 1337–1347)
Trans. ASME. August 1957, 79(6): 1347–1348.
doi: https://doi.org/10.1115/1.4013321
Closure to “Discussion of ‘Fatigue of Metals Under Combinations of Stresses’” (1957, Trans. ASME, 79, pp. 1347–1348)
Trans. ASME. August 1957, 79(6): 1348.
doi: https://doi.org/10.1115/1.4013322
Discussion: “Power From Solar Energy” (Yellott, J. I., 1957, Trans. ASME, 79, pp. 1349–1358)
Trans. ASME. August 1957, 79(6): 1358.
doi: https://doi.org/10.1115/1.4013324
Topics:
Solar energy
Discussion: “Power From Solar Energy” (Yellott, J. I., 1957, Trans. ASME, 79, pp. 1349–1358)
Trans. ASME. August 1957, 79(6): 1358.
doi: https://doi.org/10.1115/1.4013325
Topics:
Solar energy
Closure to “Discussions of ‘Power From Solar Energy’” (1957, Trans. ASME, 79, p. 1358)
Trans. ASME. August 1957, 79(6): 1358–1359.
doi: https://doi.org/10.1115/1.4013326
Topics:
Solar energy
Discussion: “Estimating Partial-Load Performance of Large Reheat Turbine-Generator Units” (Fulton, S. D., and Morgan, Jr., D. W. R., 1957, Trans. ASME, 79, pp. 1360–1368)
Trans. ASME. August 1957, 79(6): 1368.
doi: https://doi.org/10.1115/1.4013328
Topics:
Stress
,
Turbogenerators
Discussion: “Estimating Partial-Load Performance of Large Reheat Turbine-Generator Units” (Fulton, S. D., and Morgan, Jr., D. W. R., 1957, Trans. ASME, 79, pp. 1360–1368)
Trans. ASME. August 1957, 79(6): 1368–1369.
doi: https://doi.org/10.1115/1.4013329
Topics:
Stress
,
Turbogenerators
Discussion: “Estimating Partial-Load Performance of Large Reheat Turbine-Generator Units” (Fulton, S. D., and Morgan, Jr., D. W. R., 1957, Trans. ASME, 79, pp. 1360–1368)
Trans. ASME. August 1957, 79(6): 1369.
doi: https://doi.org/10.1115/1.4013330
Topics:
Stress
,
Turbogenerators
Closure to “Discussions of ‘Estimating Partial-Load Performance of Large Reheat Turbine-Generator Units’” (1957, Trans. ASME, 79, pp. 1368–1369)
Trans. ASME. August 1957, 79(6): 1369–1370.
doi: https://doi.org/10.1115/1.4013331
Topics:
Stress
,
Turbogenerators
Discussion: “Metallurgical Considerations of Main Steam Piping for High-Temperature, High-Pressure Service” (Blumberg, H. S., 1957, Trans. ASME, 79, pp. 1377–1391)
Trans. ASME. August 1957, 79(6): 1391–1393.
doi: https://doi.org/10.1115/1.4013336
Topics:
High pressure (Physics)
,
High temperature
,
Pipes
,
Steam
Discussion: “Metallurgical Considerations of Main Steam Piping for High-Temperature, High-Pressure Service” (Blumberg, H. S., 1957, Trans. ASME, 79, pp. 1377–1391)
Trans. ASME. August 1957, 79(6): 1393.
doi: https://doi.org/10.1115/1.4013337
Topics:
High pressure (Physics)
,
High temperature
,
Pipes
,
Steam
Discussion: “Metallurgical Considerations of Main Steam Piping for High-Temperature, High-Pressure Service” (Blumberg, H. S., 1957, Trans. ASME, 79, pp. 1377–1391)
Trans. ASME. August 1957, 79(6): 1393.
doi: https://doi.org/10.1115/1.4013338
Topics:
High pressure (Physics)
,
High temperature
,
Pipes
,
Steam
Discussion: “Metallurgical Considerations of Main Steam Piping for High-Temperature, High-Pressure Service” (Blumberg, H. S., 1957, Trans. ASME, 79, pp. 1377–1391)
Trans. ASME. August 1957, 79(6): 1393–1395.
doi: https://doi.org/10.1115/1.4013339
Topics:
High pressure (Physics)
,
High temperature
,
Pipes
,
Steam
Discussion: “Metallurgical Considerations of Main Steam Piping for High-Temperature, High-Pressure Service” (Blumberg, H. S., 1957, Trans. ASME, 79, pp. 1377–1391)
Trans. ASME. August 1957, 79(6): 1395–1396.
doi: https://doi.org/10.1115/1.4013340
Topics:
High pressure (Physics)
,
High temperature
,
Pipes
,
Steam
Discussion: “Metallurgical Considerations of Main Steam Piping for High-Temperature, High-Pressure Service” (Blumberg, H. S., 1957, Trans. ASME, 79, pp. 1377–1391)
Trans. ASME. August 1957, 79(6): 1396.
doi: https://doi.org/10.1115/1.4013341
Topics:
High pressure (Physics)
,
High temperature
,
Pipes
,
Steam
Discussion: “Metallurgical Considerations of Main Steam Piping for High-Temperature, High-Pressure Service” (Blumberg, H. S., 1957, Trans. ASME, 79, pp. 1377–1391)
Trans. ASME. August 1957, 79(6): 1396.
doi: https://doi.org/10.1115/1.4013342
Topics:
High pressure (Physics)
,
High temperature
,
Pipes
,
Steam
Discussion: “Metallurgical Considerations of Main Steam Piping for High-Temperature, High-Pressure Service” (Blumberg, H. S., 1957, Trans. ASME, 79, pp. 1377–1391)
Trans. ASME. August 1957, 79(6): 1396–1397.
doi: https://doi.org/10.1115/1.4013343
Topics:
High pressure (Physics)
,
High temperature
,
Pipes
,
Steam
Discussion: “Metallurgical Considerations of Main Steam Piping for High-Temperature, High-Pressure Service” (Blumberg, H. S., 1957, Trans. ASME, 79, pp. 1377–1391)
Trans. ASME. August 1957, 79(6): 1397.
doi: https://doi.org/10.1115/1.4013344
Topics:
High pressure (Physics)
,
High temperature
,
Pipes
,
Steam
Closure to “Discussions of ‘Metallurgical Considerations of Main Steam Piping for High-Temperature, High-Pressure Service’” (1957, Trans. ASME, 79, pp. 1391–1397)
Trans. ASME. August 1957, 79(6): 1397.
doi: https://doi.org/10.1115/1.4013345
Topics:
High pressure (Physics)
,
High temperature
,
Pipes
,
Steam
Discussion: “Engineering the Eddystone Plant for 5000-Lb 1200-Deg Steam” (Harlow, J. H., 1957, Trans. ASME, 79, pp. 1410–1429)
Trans. ASME. August 1957, 79(6): 1429–1430.
doi: https://doi.org/10.1115/1.4013348
Discussion: “Engineering the Eddystone Plant for 5000-Lb 1200-Deg Steam” (Harlow, J. H., 1957, Trans. ASME, 79, pp. 1410–1429)
Trans. ASME. August 1957, 79(6): 1430.
doi: https://doi.org/10.1115/1.4013349
Discussion: “Engineering the Eddystone Steam Generator for 5000-Psig, 1200-F Steam” (Powell, E. M., 1957, Trans. ASME, 79, pp. 1447–1457)
Trans. ASME. August 1957, 79(6): 1457.
doi: https://doi.org/10.1115/1.4013352
Discussion: “Engineering the Eddystone Steam Generator for 5000-Psig, 1200-F Steam” (Powell, E. M., 1957, Trans. ASME, 79, pp. 1447–1457)
Trans. ASME. August 1957, 79(6): 1457.
doi: https://doi.org/10.1115/1.4013353
Discussion: “Engineering the Eddystone Steam Generator for 5000-Psig, 1200-F Steam” (Powell, E. M., 1957, Trans. ASME, 79, pp. 1447–1457)
Trans. ASME. August 1957, 79(6): 1457.
doi: https://doi.org/10.1115/1.4013354
Closure to “Discussions of ‘Engineering the Eddystone Steam Generator for 5000-Psig, 1200-F Steam’” (1957, Trans. ASME, 79, p. 1457)
Trans. ASME. August 1957, 79(6): 1457.
doi: https://doi.org/10.1115/1.4013355