Selection criteria and design evaluations of several types of bearing dampers with active control for application to aircraft engines were described in a companion paper. A disk type electrorheological (ER) damper was chosen for further study and testing. The results of the tests and the final conclusions of the study are described in this paper. Experimental results including stiffness and damping coefficients are presented for the ER bearing damper with two types of ER fluid, 350 CS and 10 CS (centistokes) viscosity. The vibration attenuation performance of the ER damper was measured on a rotordynamic test rig in the form of free vibration decay, rotor orbits, and runup unbalance responses. The results show that the ER fluid with lower viscosity has the better characteristics for rotordynamic applications. It was found that ER fluids produce both Coulomb and viscous damping. If only the damping is considered, the Coulomb type is less desirable, but with active control it can also achieve control of rotor stiffness. A feedback control system was developed and applied to the ER damper with the objective of improving the overall rotordynamic performance of the rotor bearing system, considering both vibration amplitudes and dynamic bearing forces. A “bang–bang” (on and off) simple control logic was found to work better in practice than more sophisticated schemes. The measured runup response of the rotor-bearing system with this control approximated the desired vibration response curves fairly well. The tests highlighted some of the practical considerations that would be important for aircraft engine applications, such as the ER fluid limitations, the electrical power supply requirements, the electrical insulation requirements, the nonlinear relationship between the voltage and the damping, and the relative benefits of active control. It is concluded that active control of bearing damping is probably not a practical improvement over the passive squeeze film dampers currently used in most aircraft gas turbine engines. [S0742-4795(00)01202-3]
Skip Nav Destination
Article navigation
April 2000
Technical Papers
Experimental Measurements of Actively Controlled Bearing Damping With an Electrorheological Fluid
John M. Vance,
John M. Vance
Mechanical Engineering Department, Texas A & M University, College Station, TX 77843
Search for other works by this author on:
Daniel Ying
Daniel Ying
Bently Nevada Corporation, 7651 Airport Boulevard, Houston, TX 77059
Search for other works by this author on:
John M. Vance
Mechanical Engineering Department, Texas A & M University, College Station, TX 77843
Daniel Ying
Bently Nevada Corporation, 7651 Airport Boulevard, Houston, TX 77059
Contributed by the International Gas Turbine Institute (IGTI) of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Paper presented at the International Gas Turbine and Aeroengine Congress and Exhibition, Indianapolis, IN, June 7–10, 1999; ASME Paper 99-GT-17. Manuscript received by IGTI March 9, 1999; final revision received by the ASME Headquarters January 3, 2000. Associate Technical Editor: D. Wisler.
J. Eng. Gas Turbines Power. Apr 2000, 122(2): 337-344 (8 pages)
Published Online: January 3, 2000
Article history
Received:
March 9, 1999
Revised:
January 3, 2000
Citation
Vance, J. M., and Ying, D. (January 3, 2000). "Experimental Measurements of Actively Controlled Bearing Damping With an Electrorheological Fluid ." ASME. J. Eng. Gas Turbines Power. April 2000; 122(2): 337–344. https://doi.org/10.1115/1.483212
Download citation file:
Get Email Alerts
Shape Optimization of an Industrial Aeroengine Combustor to reduce Thermoacoustic Instability
J. Eng. Gas Turbines Power
Dynamic Response of A Pivot-Mounted Squeeze Film Damper: Measurements and Predictions
J. Eng. Gas Turbines Power
Review of The Impact Of Hydrogen-Containing Fuels On Gas Turbine Hot-Section Materials
J. Eng. Gas Turbines Power
Effects of Lattice Orientation Angle On Tpms-Based Transpiration Cooling
J. Eng. Gas Turbines Power
Related Articles
Directionally Controllable Squeeze Film Damper Using Electro-Rheological Fluid
J. Vib. Acoust (January,2002)
Electro-Rheological Multi-layer Squeeze Film Damper and Its Application to Vibration Control of Rotor System
J. Vib. Acoust (January,2000)
Controllable Squeeze Film Damper (An Application of Electro-Rheological Fluid)
J. Vib. Acoust (July,1992)
Vibrations of Stiffened Composite Panels With Smart Materials
J. Vib. Acoust (July,2004)
Related Proceedings Papers
Related Chapters
Summary and Conclusions
Bearing Dynamic Coefficients in Rotordynamics: Computation Methods and Practical Applications
Fundamentals of Structural Dynamics
Flow Induced Vibration of Power and Process Plant Components: A Practical Workbook
Effect of tea to Properties and Microstructure of TiO 2 /TEA Particles Electrorheological Fluid
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3