At present, inlet fogging and wet compression are two of the most widely used approaches to enhance gas turbine performance, especially during hot seasons. However, potentially negative effects of these practices on long-term operational integrity of gas turbines should be evaluated carefully; in particular, wet compression may lead to the erosion of first compressor stages due to the impact of water droplets within the flow at compressor intake. This issue is still controversial in technical literature since only limited historical field operating data and information are available. Therefore, a test facility was specifically set up in the laboratories of the University of Ferrara, to evaluate the effects of wet compression on a small-size compressor. This paper presents the experimental facility developed for wet compression investigation and some preliminary results.

Issue Section:
Gas Turbines: Industrial & Cogeneration
Keywords:
compressors, gas turbines
Topics:
Compression, Compressors, Drops, Flow (Dynamics), Water, Ejectors
1.
Bhargava
,
R. K.
,
Meher-Homji
,
C. B.
,
Chaker
,
M. A.
,
Bianchi
,
M.
,
Melino
,
F.
,
Peretto
,
A.
, and
Ingistov
,
S.
, 2007, “
Gas Turbine Fogging Technology: A State-of-the-Art Review, Part I: Inlet Evaporative Fogging—Analytical and Experimental Aspects
,”
ASME J. Eng. Gas Turbines Power
0742-4795,
129
, pp.
443
–
453
.
Crossref
Search ADS
 
2.
Bhargava
,
R. K.
,
Meher-Homji
,
C. B.
,
Chaker
,
M. A.
,
Bianchi
,
M.
,
Melino
,
F.
,
Peretto
,
A.
, and
Ingistov
,
S.
, 2007, “
Gas Turbine Fogging Technology: A State-of-the-Art Review, Part II: Overspray Fogging—Analytical and Experimental Aspects
,”
ASME J. Eng. Gas Turbines Power
0742-4795,
129
, pp.
454
–
460
.
Crossref
Search ADS
 
3.
Bhargava
,
R. K.
,
Meher-Homji
,
C. B.
,
Chaker
,
M. C.
,
Bianchi
,
M.
,
Melino
,
F.
,
Peretto
,
A.
, and
Ingistov
,
S.
, 2007, “
Gas Turbine Fogging Technology: A State of the Art Review—Part III: Practical Considerations and Operational Experience
,”
ASME J. Eng. Gas Turbines Power
0742-4795,
129
, pp.
461
–
472
.
Crossref
Search ADS
 
4.
Bagnoli
,
M.
,
Bianchi
,
M.
,
Melino
,
F.
,
Peretto
,
A.
,
Spina
,
P. R.
,
Bhargava
,
R.
, and
Ingistov
,
S.
, 2008, “
Application of a Computational Code to Simulate Interstage Injection Effects on GE Frame 7EA Gas Turbine
,”
ASME J. Eng. Gas Turbines Power
0742-4795,
130
, p.
012001
.
Crossref
Search ADS
 
5.
Bhargava
,
R. K.
,
Bianchi
,
M.
,
Chaker
,
M. A.
,
Melino
,
F.
,
Peretto
,
A.
, and
Spina
,
P. R.
, 2009, “
Gas Turbine Compressor Performance During Wet Compression—Influence of Polydisperse Spray
,” ASME Paper No. GT2009-59920.
6.
Chaker
,
M. A.
, and
Meher-Homji
,
C. B.
, 2008, “
Gas Turbine Power Augmentation—Parametric Study Relating to Fog Droplet Size and Its Influence on Evaporative Efficiency
,” ASME Paper No. GT2008-51476.
7.
Brun
,
K.
,
Gonzales
,
L. E.
, and
Platt
,
J. P.
, 2008, “
Impact of Continuous Inlet Fogging and Overspray Operation on GE 5002 Gas Turbine Life and Performance
,” ASME Paper No. GT2008-50207.
8.
Lecheler
,
S.
,
Florjancic
,
S.
, and
Cataldi
,
G.
, 2004, “
Fogging and High Fogging: ALSTOM’s Experience and Customer Benefits
,”
Proceedings of Power-Gen Europe 2004
, Barcelona, Spain.
9.
Cataldi
,
G.
,
Guntner
,
H.
,
Matz
,
C.
,
McKay
,
T.
,
Hoffman
,
J.
,
Nemet
,
A.
,
Lecheler
,
S.
, and
Braun
,
J.
, 2004, “
Influence of High Fogging Systems on Gas Turbine Engine Operation and Performance
,” ASME Paper No. GT2004-53788.
10.
Jolly
,
S.
, and
Cloyd
,
S.
, 2003, “
Performance Enhancement of GT24 With Wet Compression
,”
Proceedings of Power-Gen International
, Las Vegas, NV.
11.
Ingistov
,
S.
, 2002, “
Interstage Injection Into Axial Compressor, Gas Turbine Model 7EA
,” ASME Paper No. GT 2002-30656.
12.
Bianchi
,
M.
,
Branchini
,
L.
,
De Pascale
,
A.
,
Melino
,
F.
, and
Peretto
,
A.
, 2007, “
NOX Reduction by Means of the Inlet Fogging Approach
,”
ECOS 20th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems
, Padova, Italy, Jun. 25–28.
13.
Schick
,
R. J.
, and
Knasiak
,
K. F.
, 2000, “
Spray Characterization for Wet Compression Gas Cooling Applications
,”
Proceedings of the Eighth International Conference on Liquid Atomization and Spray Systems
, Pasadena, CA.
14.
Carraretto
,
C.
, 2006, “
Power Plant Operation and Management in a Deregulated Market
,”
Energy
0360-5442,
31
, pp.
1000
–
1016
.
Crossref
Search ADS
 
15.
Brun
,
K.
,
Kurz
,
R.
, and
Simmons
,
H.
, 2006, “
Aerodynamic Instability and Life-Limiting Effects of Inlet and Interstage Water Injection Into Gas Turbines
,”
ASME J. Eng. Gas Turbines Power
0742-4795,
128
(
3
), pp.
617
–
625
.
Crossref
Search ADS
 
16.
Li
,
M.
, and
Zheng
,
Q.
, 2004, “
Wet Compression System Stability Analysis Part I—Wet Compression Moore Greitzer Transient Model
,” ASME Paper No. GT2004-54018.
17.
Bhargava
,
R. K.
,
Bianchi
,
M.
,
Melino
,
F.
,
Peretto
,
A.
, and
Spina
,
P. R.
, 2008, “
Influence of Compressor Performance Maps Shape on Wet Compression
,” ASME Paper No. GT2008-50761.
18.
Morini
,
M.
,
Pinelli
,
M.
,
Spina
,
P. R.
, and
Venturini
,
M.
, 2010, “
Influence of Blade Deterioration on Compressor and Turbine Performance
,”
ASME J. Eng. Gas Turbines Power
0742-4795,
132
, p.
032401
.
Crossref
Search ADS
 
19.
Fabbrizzi
,
M.
,
Cerretelli
,
C.
,
Del Medico
,
F.
, and
D’Orazio
,
M.
, 2009, “
An Experimental Investigation of a Single Stage Wet Gas Centrifugal Compressor
,” ASME Paper No. GT2009-59548.
20.
Bettocchi
,
R.
,
Pinelli
,
M.
, and
Spina
,
P. R.
, 2005, “
A MultiStage Compressor Test Facility: Uncertainty Analysis and Preliminary Test Results
,”
ASME J. Eng. Gas Turbines Power
0742-4795,
127
(
1
), pp.
170
–
177
.
Crossref
Search ADS
 
21.
Morini
,
M.
,
Pinelli
,
M.
, and
Venturini
,
M.
, 2007, “
Acoustic and Vibrational Analyses on a Multi-Stage Compressor for Unstable Behavior Precursor Identification
,” ASME Paper No. GT2007-27040.
22.
Chaker
,
M. A.
, 2005, “
Key Parameters for the Performance of Impaction Pin Nozzles Used in Inlet Fogging of Gas Turbine Engines
,” ASME Paper No. GT 2005-68346.
23.
Eisfeld
,
T.
, and
Joos
,
F.
, 2009, “
Experimental Investigation of Two-Phase Flow Phenomena in Transonic Compressor Cascades
,” ASME Paper No. GT2009-59365.
24.
Working Group 24
, 1995, “
Recommended Practices for the Assessment of the Effects of Atmospheric Water Injection on the Performance and Operability of Gas Turbines Engines
,”
Proceedings of Gas Turbine Engine Combustion, Emissions, and Alternative Fuels
, AGARD-AR-332,
Research and Technology Organization
,
Neuilly-sur-Seine, France
.
25.
Mathioudakis
,
K.
, and
Tsalavoutas
,
A.
, 2001, “
Uncertainty Reduction in Gas Turbine Performance Diagnostic by Accounting for Humidity Effects
,” ASME Paper No. GT2001-0010.
26.
Roumeliotis
,
I.
, and
Mathioudakis
,
K.
, 2010, “
Evaluation of Water Injection on Compressor and Engine Performance and Operability
,”
Appl. Energy
0306-2619,
87
, pp.
1207
–
1216
.
Crossref
Search ADS
 
27.
White
,
A. J.
, and
Meacock
,
A. J.
, 2003, “
An Evaluation of the Effects of Water Injection on Compressor Performance
,” ASME Paper No. GT2003-38237.
28.
Szabo
,
I.
, and
Turner
,
M. G.
, 2008, “
An Entropy Based Evaluation of Efficiency of a Transonic Compressor Rotor With Water Injection
,” ASME Paper No. GT2008-50248.
Copyright © 2011
 by American Society of Mechanical Engineers
You do not currently have access to this content.