Abstract

Motivated by fuel atomization applications in gas turbine combustors, this paper presents an experimental examination of liquid jet trajectory and spray dynamics in crossflow of swirling air, at elevated pressure conditions. The study was conducted within an annular passage and was focused on momentum flux ratio and swirl number as the main parameters. The momentum flux ratio was varied from 2 to 25 through incremental adjustments to the liquid injection velocity and the swirl number values of 0.42 and 0.74 were used, representing typical gas turbine fuel atomization conditions. Jet trajectories were captured by imaging the three-dimensional helical path traced by the liquid jet using two mutually perpendicular optical windows. Radial penetration was quantified by solving the equations of a helix. The key findings revealed that radial penetration of the liquid jet is larger for higher momentum flux ratios and is influenced by the helical arc length. Notably, the radial penetration observed at low momentum flux ratios was larger for crossflow with lower swirl number and the radial penetration observed at high momentum flux ratios was more for crossflows with higher swirl number. In comparison to the spray characteristics in swirling crossflows at atmospheric pressure, condition of elevated gaseous pressure resulted in lower radial penetration, jet spread and jet area. Jet trajectory correlations for elevated pressure conditions are additionally presented, developed using curve fitting to the experimental data, which will be useful to the industry for estimation of spray trajectory in swirling crossflows at high pressure conditions.

This content is only available via PDF.
You do not currently have access to this content.