Skip Nav Destination
Issues
May 2017
ISSN 0742-4795
EISSN 1528-8919
In this Issue
Research Papers
Gas Turbines: Aircraft Engine
Experimental Validation of the Aerodynamic Characteristics of an Aero-engine Intercooler
J. Eng. Gas Turbines Power. May 2017, 139(5): 051201.
doi: https://doi.org/10.1115/1.4034964
Topics:
Computational fluid dynamics
,
Ducts
,
Flow (Dynamics)
,
Inflow
,
Pressure
,
Porous materials
,
Aircraft engines
,
Pressure measurement
,
Heat exchangers
,
Outflow
Industrial Gas Turbine Health and Performance Assessment With Field Data
J. Eng. Gas Turbines Power. May 2017, 139(5): 051202.
doi: https://doi.org/10.1115/1.4034986
Topics:
Compressors
,
Engines
,
Power stations
,
Stress
,
Turbines
,
Gas turbines
,
Heat
,
Economic analysis
Gas Turbines: Coal, Biomass, and Alternative Fuels
Transient Performance Analysis of an Industrial Gas Turbine Operating on Low-Calorific Fuels
J. Eng. Gas Turbines Power. May 2017, 139(5): 051401.
doi: https://doi.org/10.1115/1.4034942
Topics:
Combustion chambers
,
Design
,
Engines
,
Flow (Dynamics)
,
Fuels
,
Gas turbines
,
Modeling
,
Rotors
,
Steady state
,
Stress
Gas Turbines: Combustion, Fuels, and Emissions
Effect of Ambient Temperature and Humidity on Combustion and Emissions of a Spark-Assisted Compression Ignition Engine
J. Eng. Gas Turbines Power. May 2017, 139(5): 051501.
doi: https://doi.org/10.1115/1.4034966
Topics:
Combustion
,
Emissions
,
Temperature
,
Homogeneous charge compression ignition engines
,
Ignition
,
Engines
Spatiotemporal Distribution of Soot Temperature for Flames Using Optical Pyrometry Under Unsteady Inlet Airflow Conditions
J. Eng. Gas Turbines Power. May 2017, 139(5): 051502.
doi: https://doi.org/10.1115/1.4034969
Topics:
Flames
,
Pyrometers
,
Temperature
,
Soot
,
Combustion
,
Calibration
Influence of Heat Transfer and Material Temperature on Combustion Instabilities in a Swirl Burner
J. Eng. Gas Turbines Power. May 2017, 139(5): 051503.
doi: https://doi.org/10.1115/1.4035143
Topics:
Combustion
,
Combustion chambers
,
Flow (Dynamics)
,
Heat transfer
,
Temperature
,
Flames
,
Heat losses
,
Boundary-value problems
Impact of a Cooled Cooling Air System on the External Aerodynamics of a Gas Turbine Combustion System
J. Eng. Gas Turbines Power. May 2017, 139(5): 051504.
doi: https://doi.org/10.1115/1.4035228
Topics:
Aerodynamics
,
Combustion chambers
,
Combustion systems
,
Cooling
,
Flow (Dynamics)
,
Pipes
,
Pressure
,
Gas turbines
,
Engines
,
Diffusers
Impact of Heat Release Distribution on the Spinning Modes of an Annular Combustor With Multiple Matrix Burners
J. Eng. Gas Turbines Power. May 2017, 139(5): 051505.
doi: https://doi.org/10.1115/1.4035207
Topics:
Combustion chambers
,
Flames
,
Heat
,
Limit cycles
,
Spin (Aerodynamics)
,
Spinning (Textile)
,
Fluctuations (Physics)
,
Pressure
,
Stability
,
Ejectors
Gas Turbines: Controls, Diagnostics, and Instrumentation
Experimental Study of Effusion Cooling With Pressure-Sensitive Paint
J. Eng. Gas Turbines Power. May 2017, 139(5): 051601.
doi: https://doi.org/10.1115/1.4034943
Topics:
Calibration
,
Computational fluid dynamics
,
Coolants
,
Cooling
,
Film cooling
,
Flow (Dynamics)
,
Pressure
,
Temperature
,
Geometry
,
Testing
Gas Turbines: Heat Transfer
Effect of Bolts on Flow and Heat Transfer in a Rotor–Stator Disk Cavity
J. Eng. Gas Turbines Power. May 2017, 139(5): 051901.
doi: https://doi.org/10.1115/1.4035144
Topics:
Cavities
,
Computational fluid dynamics
,
Disks
,
Flow (Dynamics)
,
Heat transfer
,
Rotors
,
Stators
,
Temperature
,
Wakes
,
Pressure
Gas Turbines: Manufacturing, Materials, and Metallurgy
Material Selection Issues for a Nozzle Guide Vane Against Service-Induced Failure
J. Eng. Gas Turbines Power. May 2017, 139(5): 052101.
doi: https://doi.org/10.1115/1.4035159
Topics:
Creep
,
Failure
,
Fatigue
,
Finite element methods
,
Nozzle guide vanes
,
Plasticity
,
Damage
,
Finite element model
,
Deformation
,
Fracture (Materials)
Gas Turbines: Oil and Gas Applications
An Innovative Method for the Evaluation of Particle Deposition Accounting for Rotor/Stator Interaction
J. Eng. Gas Turbines Power. May 2017, 139(5): 052401.
doi: https://doi.org/10.1115/1.4034968
Topics:
Blades
,
Particulate matter
,
Rotors
,
Stators
,
Compressors
Gas Turbines: Structures and Dynamics
Rigid Mode Vibration Control and Dynamic Behavior of Hybrid Foil–Magnetic Bearing Turbo Blower
J. Eng. Gas Turbines Power. May 2017, 139(5): 052501.
doi: https://doi.org/10.1115/1.4034920
Topics:
Bearings
,
Magnetic bearings
,
Rotors
,
Turbochargers
,
Vibration
,
Vibration control
,
Stiffness
,
Damping
,
Turbomachinery
,
Engines
Rotordynamic Computational and Experimental Characterization of a Convergent Honeycomb Seal Tested With Negative Preswirl, High Pressure With Static Eccentricity and Angular Misalignment
J. Eng. Gas Turbines Power. May 2017, 139(5): 052502.
doi: https://doi.org/10.1115/1.4034965
Topics:
Clearances (Engineering)
,
Computational fluid dynamics
,
Damping
,
Design
,
Geometry
,
High pressure (Physics)
,
Honeycomb structures
,
Pressure
,
Rotors
,
Stiffness
An Experimental Study of the Aerodynamic Forcing Function in a 1.5 Steam Turbine Stage
Giacomo Gatti, Paolo Gaetani, Berardo Paradiso, Vincenzo Dossena, Juri Bellucci, Lorenzo Arcangeli, Nicola Maceli
J. Eng. Gas Turbines Power. May 2017, 139(5): 052503.
doi: https://doi.org/10.1115/1.4034967
Topics:
Blades
,
Flow (Dynamics)
,
Pressure
,
Rotors
,
Stators
,
Turbines
,
Steam turbines
Modal Analysis Method for Blisks Based on Three-Dimensional Blade and Two-Dimensional Axisymmetric Disk Finite Element Model
J. Eng. Gas Turbines Power. May 2017, 139(5): 052504.
doi: https://doi.org/10.1115/1.4035142
Topics:
Blades
,
Disks
,
Displacement
Design and Calibration of a Full Scale Active Magnetic Bearing Based Test Facility for Investigating Rotordynamic Properties of Turbomachinery Seals in Multiphase Flow
J. Eng. Gas Turbines Power. May 2017, 139(5): 052505.
doi: https://doi.org/10.1115/1.4035176
Topics:
Calibration
,
Design
,
Manufacturing
,
Multiphase flow
,
Sensors
,
Test facilities
,
Turbomachinery
,
Flow (Dynamics)
,
Magnetic bearings
,
Pistons
Cooling Injection Effect on a Transonic Squealer Tip—Part I: Experimental Heat Transfer Results and CFD Validation
J. Eng. Gas Turbines Power. May 2017, 139(5): 052506.
doi: https://doi.org/10.1115/1.4035175
Topics:
Computational fluid dynamics
,
Cooling
,
Flow (Dynamics)
,
Heat transfer
,
Blades
,
Coolants
,
Heat transfer coefficients
,
Heat flux
,
Temperature
,
Suction
Cooling Injection Effect on a Transonic Squealer Tip—Part II: Analysis of Aerothermal Interaction Physics
J. Eng. Gas Turbines Power. May 2017, 139(5): 052507.
doi: https://doi.org/10.1115/1.4035200
Topics:
Cavities
,
Coolants
,
Cooling
,
Flow (Dynamics)
,
Heat transfer
,
Computational fluid dynamics
,
Vortex flow
Gas Turbines: Turbomachinery
Effect of Exit Pressure Pulsation on the Performance and Stability Limit of a Turbocharger Centrifugal Compressor
Maria Esperanza Barrera-Medrano, Peter Newton, Ricardo Martinez-Botas, Srithar Rajoo, Isao Tomita, Seiichi Ibaraki
J. Eng. Gas Turbines Power. May 2017, 139(5): 052601.
doi: https://doi.org/10.1115/1.4034689
Topics:
Compressors
,
Flow (Dynamics)
,
Pressure
,
Surges
,
Valves
,
Engines
,
Compression
,
Stability
,
Pulsatile flow
Entrance Aspect Ratio Effect on S-Duct Inlet Performance at High-Subsonic Flow
J. Eng. Gas Turbines Power. May 2017, 139(5): 052602.
doi: https://doi.org/10.1115/1.4035206
Topics:
Diffusers
,
Ducts
,
Flow (Dynamics)
,
Pressure
,
Computational fluid dynamics
Numerical and Experimental Investigation of Axial Gap Variation in High-Pressure Steam Turbine Stages
Juri Bellucci, Filippo Rubechini, Andrea Arnone, Lorenzo Arcangeli, Nicola Maceli, Berardo Paradiso, Giacomo Gatti
J. Eng. Gas Turbines Power. May 2017, 139(5): 052603.
doi: https://doi.org/10.1115/1.4035158
Topics:
Blades
,
Flow (Dynamics)
,
Pressure
,
Rotors
,
Turbines
,
Steam turbines
,
High pressure (Physics)
,
Stators
,
Computational fluid dynamics
A Computational and Experimental Compressor Design Project for Japanese and British High-School Students
J. Eng. Gas Turbines Power. May 2017, 139(5): 052604.
doi: https://doi.org/10.1115/1.4035208
Topics:
Design
,
Students
,
Compressors
,
Blades
Internal Combustion Engines
Research on Phase Synchronization Strategies for Diesel Engines to Startup Quickly
J. Eng. Gas Turbines Power. May 2017, 139(5): 052801.
doi: https://doi.org/10.1115/1.4035227
Topics:
Camshafts
,
Signals
,
Synchronization
,
Diesel engines
Technical Brief
A Method for Dynamic Analysis of Three-Dimensional Solid Element Rotors With Uncertain Parameters
J. Eng. Gas Turbines Power. May 2017, 139(5): 054501.
doi: https://doi.org/10.1115/1.4035049
Topics:
Rotors
,
Dynamic analysis
Email alerts
RSS Feeds
Shape Optimization of an Industrial Aeroengine Combustor to reduce Thermoacoustic Instability
J. Eng. Gas Turbines Power
Dynamic Response of A Pivot-Mounted Squeeze Film Damper: Measurements and Predictions
J. Eng. Gas Turbines Power
Review of The Impact Of Hydrogen-Containing Fuels On Gas Turbine Hot-Section Materials
J. Eng. Gas Turbines Power
Effects of Lattice Orientation Angle On Tpms-Based Transpiration Cooling
J. Eng. Gas Turbines Power
An investigation of a multi-injector, premix/micromix burner burning pure methane to pure hydrogen
J. Eng. Gas Turbines Power