Presented here is the first of a two-part investigation designed to systematically identify and investigate the parameters affecting the evaporation/boiling and critical heat flux (CHF) from thin capillary wicking structures. The evaporation/boiling heat transfer coefficient, characteristics, and CHF were investigated under steady-state conditions for a variety of capillary structures with a range of wick thicknesses, volumetric porosities, and mesh sizes. In Part I of the investigation we describe the wicking fabrication process and experimental test facility and focus on the effects of the capillary wick thickness. In Part II we examine the effects of variations in the volumetric porosity and the mesh size as well as presenting detailed discussions of the evaporation/boiling phenomena from thin capillary wicking structures. An optimal sintering process was developed and employed to fabricate the test articles, which were fabricated using multiple, uniform layers of sintered isotropic copper mesh. This process minimized the interface thermal contact resistance between the heated wall and the capillary wick, as well as enhancing the contact conditions between the layers of copper mesh. Due to the effective reduction in the thermal contact resistance between the wall and capillary wick, both the evaporation/boiling heat transfer coefficient and the critical heat flux (CHF) demonstrated dramatic improvements, with heat transfer coefficients up to and CHF values in excess of , observed. The experimental results indicate that while the evaporation/boiling heat transfer coefficient, which increases with increasing heat flux, is only related to the exposed surface area and is not affected by the capillary wick thickness, the CHF for steady-state operation is strongly dependent on the capillary wick thickness and increases proportionally with increase in the wick thickness. In addition to these observations, the experimental tests and subsequent analysis have resulted in the development of a new evaporation/boiling curve for capillary wicking structures, which provides new physical insights into the unique nature of the evaporation/boiling process in these capillary wicking structures. Sample structures and fabrication processes, as well as the test procedures are described in detail and the experimental results and observations are systematically presented and analyzed.
Skip Nav Destination
e-mail: lic4@rpi.edu
Article navigation
December 2006
This article was originally published in
Journal of Heat Transfer
Research Papers
Evaporation/Boiling in Thin Capillary Wicks (l)—Wick Thickness Effects
Chen Li,
e-mail: lic4@rpi.edu
Chen Li
Graduate Research Assistant
Student member of ASME
Rensselaer Polytechnic Institute
, Department of Mechanical, Aerospace and Nuclear Engineering, Troy, NY 12180
Search for other works by this author on:
Yaxiong Wang
Yaxiong Wang
Principal Engineer
Search for other works by this author on:
Chen Li
Graduate Research Assistant
Student member of ASME
Rensselaer Polytechnic Institute
, Department of Mechanical, Aerospace and Nuclear Engineering, Troy, NY 12180e-mail: lic4@rpi.edu
G. P. Peterson
Professor and Chancellor
Yaxiong Wang
Principal Engineer
J. Heat Transfer. Dec 2006, 128(12): 1312-1319 (8 pages)
Published Online: January 11, 2006
Article history
Received:
August 28, 2005
Revised:
January 11, 2006
Connected Content
A correction has been published:
Evaporation/Boiling in Thin Capillary Wicks (II)—Effects of Volumetric Porosity and Mesh Size
Citation
Li, C., Peterson, G. P., and Wang, Y. (January 11, 2006). "Evaporation/Boiling in Thin Capillary Wicks (l)—Wick Thickness Effects." ASME. J. Heat Transfer. December 2006; 128(12): 1312–1319. https://doi.org/10.1115/1.2349507
Download citation file:
Get Email Alerts
Cited By
On Prof. Roop Mahajan's 80th Birthday
J. Heat Mass Transfer
Thermal Hydraulic Performance and Characteristics of a Microchannel Heat Exchanger: Experimental and Numerical Investigations
J. Heat Mass Transfer (February 2025)
Related Articles
Evaporation/Boiling in Thin Capillary Wicks (II)—Effects of Volumetric Porosity and Mesh Size
J. Heat Transfer (December,2006)
Nucleate Boiling Heat Transfer on Plain and Microporous Surfaces in Subcooled Water
J. Heat Transfer (August,2017)
Nucleate Boiling Comparison between Teflon-Coated Plain Copper and Cu-HTCMC in Water
J. Heat Transfer (August,2018)
Effect of Liquid Properties on Phase-Change Heat Transfer in Porous Wick Structures
J. Heat Transfer (March,2016)
Related Proceedings Papers
Related Chapters
Post-CHF Heat Transfer in Flow Boiling
Two-Phase Heat Transfer
Critical Heat Flux in Flow Boiling
Two-Phase Heat Transfer
Energy Balance for a Swimming Pool
Electromagnetic Waves and Heat Transfer: Sensitivites to Governing Variables in Everyday Life