Thermal-hydraulic performance data for offset-strip fin arrays are readily available in the range . However, in emerging applications in automotive and aerospace systems, where fan power is not a constraint and compactness is important, it may be desirable to operate offset-strip fin heat exchangers at very high Reynolds numbers. In this paper, friction factor and mass transfer performance of an offset-strip fin array at Reynolds numbers between 10,000 and 120,000 are characterized. A scale-model, eight-column fin array is used in pressure drop and naphthalene sublimation experiments, and the data are compared to predictions of performance given by available analytical models and extrapolations of the best available correlations. The friction factor data follow the correlation-predicted trend of decreasing monotonically as the Reynolds number is increased to 20,000. However, at higher Reynolds numbers, the friction factor increases as the Reynolds number increases and local maxima are observed in the data. Over the range investigated, the modified Colburn factor decreases monotonically as the Reynolds number increases. For Reynolds numbers in the range , well beyond that covered by state-of-the-art correlations, both the friction factor and Colburn factor are roughly twice that predicted by extrapolating the best available correlations. The higher-than-predicted Colburn factor at very high Reynolds numbers is encouraging for the use of offset-strip fin heat exchangers in emerging applications where compactness is of high importance.
Skip Nav Destination
Article navigation
September 2007
This article was originally published in
Journal of Heat Transfer
Technical Papers
An Experimental Study of the Friction Factor and Mass Transfer Performance of an Offset-Strip Fin Array at Very High Reynolds Numbers
Gregory J. Michna,
Gregory J. Michna
Department of Mechanical Engineering,
Iowa State University
, 2078 H. M. Black Engineering Building, Ames, IA 50011
Search for other works by this author on:
Anthony M. Jacobi,
Anthony M. Jacobi
Department of Mechanical Science and Engineering,
University of Illinois
, 1206 West Green Street, Urbana, IL 61801
Search for other works by this author on:
Rodney L. Burton
Rodney L. Burton
Department of Aerospace Engineering,
University of Illinois
, 104 South Wright Street, Urbana, IL 61801
Search for other works by this author on:
Gregory J. Michna
Department of Mechanical Engineering,
Iowa State University
, 2078 H. M. Black Engineering Building, Ames, IA 50011
Anthony M. Jacobi
Department of Mechanical Science and Engineering,
University of Illinois
, 1206 West Green Street, Urbana, IL 61801
Rodney L. Burton
Department of Aerospace Engineering,
University of Illinois
, 104 South Wright Street, Urbana, IL 61801J. Heat Transfer. Sep 2007, 129(9): 1134-1140 (7 pages)
Published Online: January 22, 2007
Article history
Received:
June 27, 2006
Revised:
January 22, 2007
Citation
Michna, G. J., Jacobi, A. M., and Burton, R. L. (January 22, 2007). "An Experimental Study of the Friction Factor and Mass Transfer Performance of an Offset-Strip Fin Array at Very High Reynolds Numbers." ASME. J. Heat Transfer. September 2007; 129(9): 1134–1140. https://doi.org/10.1115/1.2739599
Download citation file:
Get Email Alerts
Cited By
On Prof. Roop Mahajan's 80th Birthday
J. Heat Mass Transfer
Thermal Hydraulic Performance and Characteristics of a Microchannel Heat Exchanger: Experimental and Numerical Investigations
J. Heat Mass Transfer (February 2025)
Related Articles
Three-Dimensional Turbulent Flow in the Exit Head Section of a Heat Exchanger
J. Fluids Eng (January,2004)
Local and Average Characteristics of Heat/Mass Transfer Over Flat
Tube Bank Fin With Four Vortex Generators per Tube
J. Heat Transfer (June,2002)
Heat Transfer-Friction Characteristic Comparison in Rectangular Ducts With Slit and Solid Ribs Mounted on One Wall
J. Heat Transfer (August,1998)
New Correlative Models for Fully Developed Turbulent Heat and Mass Transfer in Circular and Noncircular Ducts
J. Heat Transfer (January,2012)
Related Proceedings Papers
Related Chapters
Hydraulic Resistance
Heat Transfer & Hydraulic Resistance at Supercritical Pressures in Power Engineering Applications
Fluidelastic Instability of Tube Bundles in Single-Phase Flow
Flow-Induced Vibration Handbook for Nuclear and Process Equipment
Random Turbulence Excitation in Single-Phase Flow
Flow-Induced Vibration Handbook for Nuclear and Process Equipment