... orientation angle hydrophobic porous coating porous coated hybrid elliptical heating tube wettability enhancement factor The beauty of nucleate boiling is recognized for its low wall superheat with high heat transfer capabilities. Therefore, the popularity of this sophisticated process...

.... As it is difficult to measure the surface wettability in a mini/microchannel, this work makes use of the ageing and surface characterization study conducted on the dummy copper samples to infer the influence of ageing on mini/microchannel surface characteristics and consequently its boiling performance. The test...

...Avijit Karmakar; Sumanta Acharya The performance of a falling-film heat exchanger is strongly linked to the surface characteristics and the heat transfer processes that take place over the tubes. The primary aim of this numerical study is to characterize the influence of surface wettability...

... height for Cassie–Baxter state. The system wettability, thin film length and heat transfer rate increase with increasing slip length and with decreasing roughness for Cassie–Baxter state. A smaller roughness coexisting with a larger slip length on rough surfaces for Cassie–Baxter state results in a much...

... wettability but not by the substrate’s thermal diffusivity. The different regimes of evaporation exhibited by glass and metallic substrates are explained in terms of evaporation fluxes at the drop surface. In the case of wetting drops (below 40 deg), the evaporation flux is very important along the drop...

... the last few decades, high-heat-flux removal still largely remains as a challenging subject that needs further exploration and study. In this paper, we have reviewed recent developments in several high-heat-flux heat removal techniques, including microchannels, jet impingements, sprays, wettability effects...

...Youngsuk Nam; Jinfeng Wu; Gopinath Warrier; Y. Sungtaek Ju The growth and departure of single bubbles on two smooth surfaces with very different wettabilities are studied using high-speed video microscopy and numerical simulations. Isolated artificial cavities of approximately 10 μ m diameter...

...L. Liu; A. M. Jacobi A study of condensate retention and the attendant thermal-hydraulic effect associated with changes in air-side surface wettability is presented for a series of slit-fin-and-tube heat exchangers of identical geometry with controlled wettability covering a wide range of contact...