Volume 9 Issue 5 | ASTM J. ASTM Int. | ASME Digital Collection

Skip Nav Destination

Research Papers

Fundamentals of Biobased and Biodegradable Lubricants: A Real World Perspective

Mark Miller

J. ASTM Int.. May 2012, 9(5): 1–6. doi: https://doi.org/10.1520/JAI103578

Abstract

View articletitled, Fundamentals of Biobased and Biodegradable Lubricants: A Real World Perspective

Open the PDF for in another window

Methods to Increase the Fatigue Life of Friction Stir Lap Welds in No-load Transfer Coupons Using a Retractable Pin Tool

Farzad Baratzadeh, Christian A. Widener, Hamid M. Lankarani, Dwight A. Burford

J. ASTM Int.. May 2012, 9(5): 1–16. doi: https://doi.org/10.1520/JAI103899

Abstract

View articletitled, Methods to Increase the Fatigue Life of Friction Stir Lap Welds in No-load Transfer Coupons Using a Retractable Pin Tool

Open the PDF for in another window

Study of an On-Line Crack Compliance Technique for Residual Stress Measurement Using 2D Finite Element Simulations of Fatigue Crack Growth

S. Ismonov, S. R. Daniewicz

J. ASTM Int.. May 2012, 9(5): 1–15. doi: https://doi.org/10.1520/JAI103952

Abstract

View articletitled, Study of an On-Line Crack Compliance Technique for Residual Stress Measurement Using 2D Finite Element Simulations of Fatigue Crack Growth

Open the PDF for in another window

Estimation of Corrosion Fatigue-Crack Growth through Frequency Shedding Method

Raghu V. Prakash, Sampath Dhinakaran

J. ASTM Int.. May 2012, 9(5): 1–13. doi: https://doi.org/10.1520/JAI103988

Abstract

View articletitled, Estimation of Corrosion Fatigue-Crack Growth through Frequency Shedding Method

Open the PDF for in another window

EPR/PTFE Dosimetry for Test Reactor Environments

D. W. Vehar, P. J. Griffin, T. J. Quirk

J. ASTM Int.. May 2012, 9(5): 1–11. doi: https://doi.org/10.1520/JAI104051

Abstract

View articletitled, EPR/PTFE Dosimetry for Test Reactor Environments

Open the PDF for in another window

A Broad-Group Cross-Section Library Based on ENDF/B-VII.0 for Fast Neutron Dosimetry Using the CPXSD Methodology

F. A. Alpan

J. ASTM Int.. May 2012, 9(5): 1–9. doi: https://doi.org/10.1520/JAI104060

Abstract

View articletitled, A Broad-Group Cross-Section Library Based on ENDF/B-VII.0 for Fast Neutron Dosimetry Using the CPXSD Methodology

Open the PDF for in another window

Adhesive Joints in Glass and Solar Engineering

Bernhard Weller, Iris Vogt

J. ASTM Int.. May 2012, 9(5): 1–20. doi: https://doi.org/10.1520/JAI104076

Abstract

View articletitled, Adhesive Joints in Glass and Solar Engineering

Open the PDF for in another window

A Systematic Approach to the Study of Accelerated Weathering of Building Joint Sealants

Christopher C. White, Donald L. Hunston, Kar Tean Tan, James J. Filliben, Adam L. Pintar, Greg Schueneman

J. ASTM Int.. May 2012, 9(5): 1–17. doi: https://doi.org/10.1520/JAI104091

Abstract

View articletitled, A Systematic Approach to the Study of Accelerated Weathering of Building Joint Sealants

Open the PDF for in another window

Weathering Evaluation of Structural Silicone Sealants Used in Korea

Jinyoung Jung, Kendo Hahn, Hyoungwook Lee

J. ASTM Int.. May 2012, 9(5): 1–10. doi: https://doi.org/10.1520/JAI104101

Abstract

View articletitled, Weathering Evaluation of Structural Silicone Sealants Used in Korea

Open the PDF for in another window

Development and Testing of the VITAMIN-B7/BUGLE-B7 Coupled Neutron-Gamma Multigroup Cross-Section Libraries

J. M. Risner, D. Wiarda, T. M. Miller, D. E. Peplow, B. W. Patton, M. E. Dunn, B. T. Parks

J. ASTM Int.. May 2012, 9(5): 1–10. doi: https://doi.org/10.1520/JAI104130

Abstract

View articletitled, Development and Testing of the VITAMIN-B7/BUGLE-B7 Coupled Neutron-Gamma Multigroup Cross-Section Libraries

Open the PDF for in another window

Reactor Dosimetry and RPV Life Management

S. Belousov, K. Ilieva, M. Mitev

J. ASTM Int.. May 2012, 9(5): 1–7. doi: https://doi.org/10.1520/JAI104140

Abstract

View articletitled, Reactor Dosimetry and RPV Life Management

Open the PDF for in another window

A Review of the Behavior of Structural Silicone Glazing Systems Subjected to a Mega-Earthquake

Errol Bull, Jorge Cholaky

J. ASTM Int.. May 2012, 9(5): 1–23. doi: https://doi.org/10.1520/JAI104151

Abstract

View articletitled, A Review of the Behavior of Structural Silicone Glazing Systems Subjected to a Mega-Earthquake

Open the PDF for in another window

Development of an Active Detector for the Characterization of the Late-Time Radiation Environment from a Reactor Pulse

S. M. Luker, P. J. Griffin, N. R. Kolb, G. N. Naranjo, A. J. Suo-Anttila

J. ASTM Int.. May 2012, 9(5): 1–7. doi: https://doi.org/10.1520/JAI104164

Abstract

View articletitled, Development of an Active Detector for the Characterization of the Late-Time Radiation Environment from a Reactor Pulse

Open the PDF for in another window

Neutron Flux Reduction Programs for Reactor Pressure Vessel of Korea Nuclear Unit 1

Choon Sung Yoo, Byoung Chul Kim

J. ASTM Int.. May 2012, 9(5): 1–10. doi: https://doi.org/10.1520/JAI104176

Abstract

View articletitled, Neutron Flux Reduction Programs for Reactor Pressure Vessel of Korea Nuclear Unit 1

Open the PDF for in another window

Statistical Comparison of Analysis Results for Lead on Dust Wipe Samples by X-ray Fluorescence Analysis and Flame Atomic Absorption Spectrometry

John Rogers, Susan Viet, Sandy Roda, Alexa Fraser, Warren Friedman, Joey Zhou, David Jacobs

J. ASTM Int.. May 2012, 9(5): 1–12. doi: https://doi.org/10.1520/JAI104196

Abstract

View articletitled, Statistical Comparison of Analysis Results for Lead on Dust Wipe Samples by X-ray Fluorescence Analysis and Flame Atomic Absorption Spectrometry

Open the PDF for in another window

New Surface Samplers for Use in Forensic Sampling after a Chemical Incident

Daniel J. Ehntholt, Kevin J. Beltis, Michael J. Jakubowski, John F. Martin, Madeline F. McComish

J. ASTM Int.. May 2012, 9(5): 1–9. doi: https://doi.org/10.1520/JAI104217

Abstract

View articletitled, New Surface Samplers for Use in Forensic Sampling after a Chemical Incident

Open the PDF for in another window

The Mechanism of Adhesion Improvement of Elastomeric Silicone Sealants to Difficult-to-Bond Polymeric Substrates through Reactive or Interpenetrating Molecular Brushes

W.(Voytek) S. Gutowski, Gary Toikka, Sheng Li

J. ASTM Int.. May 2012, 9(5): 1–16. doi: https://doi.org/10.1520/JAI104275

Abstract

View articletitled, The Mechanism of Adhesion Improvement of Elastomeric Silicone Sealants to Difficult-to-Bond Polymeric Substrates through Reactive or Interpenetrating Molecular Brushes

Open the PDF for in another window

Fatigue Sensitivity to Small Defects of a Gamma–Titanium–Aluminide Alloy

Mauro Filippini, Stefano Beretta, Luca Patriarca, Giuseppe Pasquero, Silvia Sabbadini

J. ASTM Int.. May 2012, 9(5): 1–12. doi: https://doi.org/10.1520/JAI104293

Abstract

View articletitled, Fatigue Sensitivity to Small Defects of a Gamma–Titanium–Aluminide Alloy

Open the PDF for in another window

Use of Ultrasound Thermometry to Study Natural Convection in Opaque Nanofluids

Kau-Fui V. Wong, Bradley L. Bon

J. ASTM Int.. May 2012, 9(5): 1–12. doi: https://doi.org/10.1520/JAI104320

Abstract

View articletitled, Use of Ultrasound Thermometry to Study Natural Convection in Opaque Nanofluids

Open the PDF for in another window

Evaluation of Chlorella Minutissima Oil for Biodiesel Production

Savita Kaul, Rahul Jain, Sivakumar Konathala, Dinesh Bangwal, Neeraj Atray, Basant Kumar

J. ASTM Int.. May 2012, 9(5): 1–6. doi: https://doi.org/10.1520/JAI104322

Abstract

View articletitled, Evaluation of <em>Chlorella Minutissima</em> Oil for Biodiesel Production

Open the PDF for in another window

Optimization of Biodiesel Production by Response Surface Methodology and Genetic Algorithm

Richa Singhal, Prateek Seth, Dinesh Bangwal, Savita Kaul

J. ASTM Int.. May 2012, 9(5): 1–7. doi: https://doi.org/10.1520/JAI104328

Abstract

View articletitled, Optimization of Biodiesel Production by Response Surface Methodology and Genetic Algorithm

Open the PDF for in another window

Comparison of the Performance of Copper Oxide Nanofluid with Water in Electronic Cooling

Praveen K. Namburu, K. Debendra Das, S. Ravikanth Vajjha

J. ASTM Int.. May 2012, 9(5): 1–15. doi: https://doi.org/10.1520/JAI104342

Abstract

View articletitled, Comparison of the Performance of Copper Oxide Nanofluid with Water in Electronic Cooling

Open the PDF for in another window

Boundary-Layer Flow of a Nanofluid past a Stretching Sheet under Uniform Heat and Mass Flux

W. A. Khan, I. Pop

J. ASTM Int.. May 2012, 9(5): 1–9. doi: https://doi.org/10.1520/JAI104363

Abstract

View articletitled, Boundary-Layer Flow of a Nanofluid past a Stretching Sheet under Uniform Heat and Mass Flux

Open the PDF for in another window

Effect of Addition of Aluminum Nanoparticles on Cooling Performance and Quench Severity of Water during Immersion Quenching

G. Ramesh, K. Narayan Prabhu

J. ASTM Int.. May 2012, 9(5): 1–9. doi: https://doi.org/10.1520/JAI104404

Abstract

View articletitled, Effect of Addition of Aluminum Nanoparticles on Cooling Performance and Quench Severity of Water during Immersion Quenching

Open the PDF for in another window

Nucleate Pool Boiling Heat Transfer Correlation for TiO₂-Water Nanofluids

A. Suriyawong, A. S. Dalkilic, S. Wongwises

J. ASTM Int.. May 2012, 9(5): 1–12. doi: https://doi.org/10.1520/JAI104409

Abstract

View articletitled, Nucleate Pool Boiling Heat Transfer Correlation for TiO<sub>2</sub>-Water Nanofluids

Open the PDF for in another window

Synthesis of Copper Nanofluids Using Ascorbic Acid Reduction Method Via One Step Solution Phase Approach

Sandhya U. Shenoy, A. Nityananda Shetty

J. ASTM Int.. May 2012, 9(5): 1–13. doi: https://doi.org/10.1520/JAI104416

Abstract

View articletitled, Synthesis of Copper Nanofluids Using Ascorbic Acid Reduction Method Via One Step Solution Phase Approach

Open the PDF for in another window

Reduction of Emission in a Diesel Engine Using Nanofuel – Ceria Nanoparticle Dispersed Diesel

Saptarshi Mandal, S. Kanagaraj

J. ASTM Int.. May 2012, 9(5): 1–9. doi: https://doi.org/10.1520/JAI104424

Abstract

View articletitled, Reduction of Emission in a Diesel Engine Using Nanofuel – Ceria Nanoparticle Dispersed Diesel

Open the PDF for in another window

Preparation and Characterization of Surfactant Coated Ce-Zr Nanoparticles and Nanofuel

Rajiv Sharma, S. Kanagaraj

J. ASTM Int.. May 2012, 9(5): 1–11. doi: https://doi.org/10.1520/JAI104429

Abstract

View articletitled, Preparation and Characterization of Surfactant Coated Ce-Zr Nanoparticles and Nanofuel

Open the PDF for in another window

Thermal Conductivity and Rheological Behaviour of Al-alloy Dispersed Ethylene Glycol Based Nanofluids

Gayatri Paul, John Philip, Baldev Raj, Prasanta Kumar Das, Indranil Manna

J. ASTM Int.. May 2012, 9(5): 1–13. doi: https://doi.org/10.1520/JAI104435

Abstract

View articletitled, Thermal Conductivity and Rheological Behaviour of Al-alloy Dispersed Ethylene Glycol Based Nanofluids

Open the PDF for in another window

Optimum CNT Concentration and Bath Temperature for Maximum Heat Transfer Rate during Quenching in CNT Nanofluids

K. Babu, T. S. Prasanna Kumar

J. ASTM Int.. May 2012, 9(5): 1–12. doi: https://doi.org/10.1520/JAI104442

Abstract

View articletitled, Optimum CNT Concentration and Bath Temperature for Maximum Heat Transfer Rate during Quenching in CNT Nanofluids

Open the PDF for in another window

Flow Visualization, Critical Heat Flux Enhancement, and Transient Characteristics in Pool Boiling Using Nanofluids

Ramakrishna N. Hegde, Shrikantha S. Rao, R. P. Reddy

J. ASTM Int.. May 2012, 9(5): 1–16. doi: https://doi.org/10.1520/JAI104443

Abstract

View articletitled, Flow Visualization, Critical Heat Flux Enhancement, and Transient Characteristics in Pool Boiling Using Nanofluids

Open the PDF for in another window

Influence of the Reaction Conditions on the Ester Content and Characterization of Biodiesel via Ethylic Route

Sérgio L. Ferreira, Antonio M. dos Santos, Gustavo R. de Souza, Wagner L. Polito

J. ASTM Int.. May 2012, 9(5): 1–8. doi: https://doi.org/10.1520/JAI104452

Abstract

View articletitled, Influence of the Reaction Conditions on the Ester Content and Characterization of Biodiesel via Ethylic Route

Open the PDF for in another window

Fuel Quality Assessment of Ethyl Esters Produced from Vegetable Oils and Their Blends With Petroleum Diesel

G. Anastopoulos, S. Kalligeros, F. Zannikos

J. ASTM Int.. May 2012, 9(5): 1–14. doi: https://doi.org/10.1520/JAI104528

Abstract

View articletitled, Fuel Quality Assessment of Ethyl Esters Produced from Vegetable Oils and Their Blends With Petroleum Diesel

Open the PDF for in another window

Metrological Approach in the Study of Biodiesel Viscosity Variation with Temperature

D. M. E. Santo Filho, C. R. C. Rodrigues, A. P. F. Barbosa, J. J. P. dos Santos, Jr., F. O. Baldner, R. G. Pereira, C. S. C. Castro, J. R. R. Siqueira, R. J. Daroda, L. S. Lima

J. ASTM Int.. May 2012, 9(5): 1–15. doi: https://doi.org/10.1520/JAI104612

Abstract

View articletitled, Metrological Approach in the Study of Biodiesel Viscosity Variation with Temperature

Open the PDF for in another window

Technical Notes

Easy Ambient Sonic-Spray Ionization Mass Spectrometry: An Alternative Method to Quantify Organic Impurities in Biodiesel

Rosana M. Alberici, Vanderlea de Souza, Lenise V. Gonçalves, Valnei S. Cunha, Marcos N. Eberlin, Romeu J. Daroda

J. ASTM Int.. May 2012, 9(5): 1–8. doi: https://doi.org/10.1520/JAI104552

Abstract

View articletitled, Easy Ambient Sonic-Spray Ionization Mass Spectrometry: An Alternative Method to Quantify Organic Impurities in Biodiesel

Open the PDF for in another window

Discussion

Discussion on “Mesothelioma in Drywall Finishing Workers,” by McCoy, M. J., Wolter, M. E., and Anderson, K. E. [Journal of ASTM International Vol. 8, No. 1 (2011), Paper ID JAI102786]

John M. Dement, Hester J. Lipscomb

J. ASTM Int.. May 2012, 9(5): 1–2. doi: https://doi.org/10.1520/JAI104630

View articletitled, Discussion on “Mesothelioma in Drywall Finishing Workers,” by McCoy, M. J., Wolter, M. E., and Anderson, K. E. [Journal of ASTM International Vol. 8, No. 1 (2011), Paper ID JAI102786]

Open the PDF for in another window

Closure

Response to Discussion on “Mesothelioma in Drywall Finishing Workers,” by McCoy, M. J., Wolter, M. E., and Anderson, K. E. [Journal of ASTM International Vol. 8, No. 1 (2011), Paper ID JAI102786]

Kim E. Anderson

J. ASTM Int.. May 2012, 9(5): 1–3. doi: https://doi.org/10.1520/JAI104683

View articletitled, Response to Discussion on “Mesothelioma in Drywall Finishing Workers,” by McCoy, M. J., Wolter, M. E., and Anderson, K. E. [Journal of ASTM International Vol. 8, No. 1 (2011), Paper ID JAI102786]

Open the PDF for in another window

Issues

Research Papers

Technical Notes

Discussion

Closure

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only