Topics: Fracture (Materials) , Laser welding , Lasers , Welding , Carbon dioxide lasers , Ceramics , Separation (Technology) , Thermal stresses , Welded joints

Curing and Consolidation of Advanced Thermoset Composite Laminate Parts by Pressing Between a Heated Mold and Customized Rubber-Faced Mold

Daniel Walczyk, Jaron Kuppers, Casey Hoffman

J. Manuf. Sci. Eng. February 2011, 133(1): 011002. doi: https://doi.org/10.1115/1.4003125

Abstract

View articletitled, Curing and Consolidation of Advanced Thermoset Composite Laminate Parts by Pressing Between a Heated Mold and Customized Rubber-Faced Mold

Open the PDF for in another window

Topics: Composite materials , Hardening (Curing) , Laminates , Pressure , Rubber , Manufacturing , Thermosetting composites , Temperature

Die Face Morphing With Formability Assessment

Liang Zhou, S. Jack Hu, Thomas B. Stoughton

J. Manuf. Sci. Eng. February 2011, 133(1): 011003. doi: https://doi.org/10.1115/1.4003333

Abstract

View articletitled, Die Face Morphing With Formability Assessment

Open the PDF for in another window

Topics: Deformation , Design , Displacement , Finite element analysis , Geometry , Strain gradient , Shapes , Manufacturing , Shells

Study on Air Accumulation and Influence on Flow Balance in Micro-Injection Molding

Wei Cao, Shufeng Gan, Shubing Ye, Qian Li, Changyu Shen

J. Manuf. Sci. Eng. February 2011, 133(1): 011004. doi: https://doi.org/10.1115/1.4003337

Abstract

View articletitled, Study on Air Accumulation and Influence on Flow Balance in Micro-Injection Molding

Open the PDF for in another window

Topics: Boundary-value problems , Cavities , Flow (Dynamics) , Molding , Pressure , Air flow , Manufacturing

Scaling Analysis and a Critical Thickness Criterion for Thermosetting Composites

Thomas W. Secord, Susan C. Mantell, Kim A. Stelson

J. Manuf. Sci. Eng. February 2011, 133(1): 011005. doi: https://doi.org/10.1115/1.4003338

Abstract

View articletitled, Scaling Analysis and a Critical Thickness Criterion for Thermosetting Composites

Open the PDF for in another window

Topics: Composite materials , Temperature , Thermosetting composites , Heat transfer , Heat , Hardening (Curing) , Resins

Cavity Air Flow Behavior During Filling in Microinjection Molding

C. A. Griffiths, S. S. Dimov, S. Scholz, G. Tosello

J. Manuf. Sci. Eng. February 2011, 133(1): 011006. doi: https://doi.org/10.1115/1.4003339

Abstract

View articletitled, Cavity Air Flow Behavior During Filling in Microinjection Molding

Open the PDF for in another window

Topics: Air flow , Cavities , Flow (Dynamics) , Molding , Design , Polymers , Temperature

Modeling of the Effect of Machining Parameters on Maximum Thickness of Cut in Ultrasonic Elliptical Vibration Cutting

Chandra Nath, Mustafizur Rahman, Ken Soon Neo

J. Manuf. Sci. Eng. February 2011, 133(1): 011007. doi: https://doi.org/10.1115/1.4003118

Abstract

View articletitled, Modeling of the Effect of Machining Parameters on Maximum Thickness of Cut in Ultrasonic Elliptical Vibration Cutting

Open the PDF for in another window

Topics: Brittleness , Cutting , Cycles , Machining , Vibration , Modeling , Thrust

Sequential Laser Mechanical Microdrilling of Inconel 718 Alloy

M. M. Okasha, P. T. Mativenga, Ph.D., L. Li, Ph.D.

J. Manuf. Sci. Eng. February 2011, 133(1): 011008. doi: https://doi.org/10.1115/1.4003334

Abstract

View articletitled, Sequential Laser Mechanical Microdrilling of Inconel 718 Alloy

Open the PDF for in another window

Topics: Drilling , Lasers , Drills (Tools) , Alloys

A Novel Approach for the Inspection of Flexible Parts Without the Use of Special Fixtures

Gad N. Abenhaim, Antoine S. Tahan, Alain Desrochers, Roland Maranzana

J. Manuf. Sci. Eng. February 2011, 133(1): 011009. doi: https://doi.org/10.1115/1.4003335

Abstract

View articletitled, A Novel Approach for the Inspection of Flexible Parts Without the Use of Special Fixtures

Open the PDF for in another window

Topics: Algorithms , Computer-aided design , Deformation , Inspection , Shapes , Displacement , Manufacturing , Errors

Development of a Numerical Optimization Method for Blowing Glass Parison Shapes

J. A. W. M. Groot, C. G. Giannopapa, R. M. M. Mattheij

J. Manuf. Sci. Eng. February 2011, 133(1): 011010. doi: https://doi.org/10.1115/1.4003331

Abstract

View articletitled, Development of a Numerical Optimization Method for Blowing Glass Parison Shapes

Open the PDF for in another window

Topics: Glass , Inverse problems , Optimization , Preforms , Shapes , Glass containers , Glass jars , Containers

A Hull Normal Based Approach for Cylindrical Size Assessment

Steven Turek, Sam Anand

J. Manuf. Sci. Eng. February 2011, 133(1): 011011. doi: https://doi.org/10.1115/1.4003332

Abstract

View articletitled, A Hull Normal Based Approach for Cylindrical Size Assessment

Open the PDF for in another window

Topics: Algorithms , Cylinders , Errors , Hull , Computational geometry

Ultrasonic Vibration-Assisted Pelleting of Cellulosic Biomass for Biofuel Manufacturing

P. F. Zhang, Z. J. Pei, D. H. Wang, X. R. Wu, W. L. Cong, M. Zhang, Timothy Deines

J. Manuf. Sci. Eng. February 2011, 133(1): 011012. doi: https://doi.org/10.1115/1.4003475

Abstract

View articletitled, Ultrasonic Vibration-Assisted Pelleting of Cellulosic Biomass for Biofuel Manufacturing

Open the PDF for in another window

Topics: Biofuel , Biomass , Density , Particle size , Ultraviolet radiation , Vibration , Stability , Durability , Manufacturing

Influence of Chip Serration Frequency on Chatter Formation During End Milling of Ti6Al4V

Md. Anayet U. Patwari, A. K. M. Nurul Amin, Waleed F. Faris

J. Manuf. Sci. Eng. February 2011, 133(1): 011013. doi: https://doi.org/10.1115/1.4003478

Abstract

View articletitled, Influence of Chip Serration Frequency on Chatter Formation During End Milling of Ti6Al4V

Open the PDF for in another window

Topics: Chatter , Cutting , Milling , Modal analysis , Vibration , Machining , Finite element analysis , Alloys , Resonance

B-Spline Wavelet-Based Multiresolution Analysis of Surface Texture in End-Milling of Aluminum

Yongqing Li, Jun Ni

J. Manuf. Sci. Eng. February 2011, 133(1): 011014. doi: https://doi.org/10.1115/1.4002452

Abstract

View articletitled, B-Spline Wavelet-Based Multiresolution Analysis of Surface Texture in End-Milling of Aluminum

Open the PDF for in another window

Topics: B-splines , Milling , Surface roughness , Surface texture , Wavelets , Regression models , Filters , Approximation

Technical Briefs

Grinding Micromechanisms of a Sintered Friction Material

E. Bassoli, E. Atzeni, L. Iuliano

J. Manuf. Sci. Eng. February 2011, 133(1): 014501. doi: https://doi.org/10.1115/1.4003336

Abstract

View articletitled, Grinding Micromechanisms of a Sintered Friction Material

Open the PDF for in another window

Topics: Brakes , Friction materials , Grinding , Surface roughness , Ceramics

Simulation and Experimental Research on Chatter Suppression Using Chaotic Spindle Speed Variation

Kong Fansen, Liu Peng, Zhao Xingang

J. Manuf. Sci. Eng. February 2011, 133(1): 014502. doi: https://doi.org/10.1115/1.4003476

Abstract

View articletitled, Simulation and Experimental Research on Chatter Suppression Using Chaotic Spindle Speed Variation

Open the PDF for in another window

Topics: Chatter , Cutting , Simulation , Machining , Signals

A New Empirical Relation for Free Surface Roughening

Sergei Alexandrov, Ken-Ichi Manabe, Tsuyoshi Furushima

J. Manuf. Sci. Eng. February 2011, 133(1): 014503. doi: https://doi.org/10.1115/1.4003477

Abstract

View articletitled, A New Empirical Relation for Free Surface Roughening

Open the PDF for in another window

Topics: Surface roughness

Errata

Erratum: “Transient Analysis of Downtimes and Bottleneck Dynamics in Serial Manufacturing Systems” (Journal of Manufacturing Science and Engineering, 2010, 132, p. 051015)

Qing Chang, Stephan Biller, Guoxian Xiao

J. Manuf. Sci. Eng. February 2011, 133(1): 017001. doi: https://doi.org/10.1115/1.4003340

Extract

View articletitled, Erratum: “Transient Analysis of Downtimes and Bottleneck Dynamics in Serial Manufacturing Systems” (Journal of Manufacturing Science and Engineering, 2010, 132, p. 051015)

Open the PDF for in another window

Topics: Dynamics (Mechanics) , Manufacturing , Manufacturing systems , Transient analysis

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Effects of chitosan addition on mechanical, surface, and antibacterial properties of 3D printed photopolymers

J. Manuf. Sci. Eng

Effect of Process Parameters on Texture in Quasi-Isotropic IN718 Processed by Laser Powder Bed Fusion

J. Manuf. Sci. Eng (July 2025)

Multi-Step Tool Paths Development for Reducing Geometric Deviation and Pillow Effect in Single Point Incremental Forming

J. Manuf. Sci. Eng

Characterization of adhesion in lithium-ion battery electrodes with laser-textured current collectors

J. Manuf. Sci. Eng

Experimental Study on Force and Surface Morphology of Additive Manufacturing FeCoNiCrAl_0.5 High Entropy Alloy

J. Manuf. Sci. Eng (July 2025)

Research Papers

Welding of Alumina Using a Pulsed Dual-Beam ${CO}_{2}$ Laser

Curing and Consolidation of Advanced Thermoset Composite Laminate Parts by Pressing Between a Heated Mold and Customized Rubber-Faced Mold

Die Face Morphing With Formability Assessment

Study on Air Accumulation and Influence on Flow Balance in Micro-Injection Molding

Scaling Analysis and a Critical Thickness Criterion for Thermosetting Composites

Cavity Air Flow Behavior During Filling in Microinjection Molding

Modeling of the Effect of Machining Parameters on Maximum Thickness of Cut in Ultrasonic Elliptical Vibration Cutting

Sequential Laser Mechanical Microdrilling of Inconel 718 Alloy

A Novel Approach for the Inspection of Flexible Parts Without the Use of Special Fixtures

Development of a Numerical Optimization Method for Blowing Glass Parison Shapes

A Hull Normal Based Approach for Cylindrical Size Assessment

Ultrasonic Vibration-Assisted Pelleting of Cellulosic Biomass for Biofuel Manufacturing

Influence of Chip Serration Frequency on Chatter Formation During End Milling of Ti6Al4V

B-Spline Wavelet-Based Multiresolution Analysis of Surface Texture in End-Milling of Aluminum

Technical Briefs

Grinding Micromechanisms of a Sintered Friction Material

Simulation and Experimental Research on Chatter Suppression Using Chaotic Spindle Speed Variation

A New Empirical Relation for Free Surface Roughening

Errata

Erratum: “Transient Analysis of Downtimes and Bottleneck Dynamics in Serial Manufacturing Systems” (Journal of Manufacturing Science and Engineering, 2010, 132, p. 051015)

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Briefs

Errata

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only