Skip to Main Content
American Society of Mechanical Engineers: Digital Collection
Cart
header search
Search
Advanced Search
Skip Nav Destination

Issues

Volume 94, Issue 4
November 1972
This article was originally published in
Journal of Engineering for Industry
Issue Cover
ISSN 0022-0817
In this Issue

Research Papers

Mathematical Model of Vehicle Safety Deformation Under Impact—Design for Safety
L. Gross
J. Eng. Ind. November 1972, 94(4): 961–964. doi: https://doi.org/10.1115/1.3428346
View articletitled, Mathematical Model of Vehicle Safety Deformation Under Impact—Design for Safety
Open the PDF for in another window
Topics: Deformation , Design , Safety , Vehicles
Analysis of Drill Stress by Three-Dimensional Photoelasticity
S. S. Law, M. F. DeVries, S. M. Wu
J. Eng. Ind. November 1972, 94(4): 965–970. doi: https://doi.org/10.1115/1.3428347
View articletitled, Analysis of Drill Stress by Three-Dimensional Photoelasticity
Open the PDF for in another window
Topics: Drills (Tools) , Stress , Cutting , Chisels , Corners (Structural elements) , Diffraction patterns , Drilling , Shear stress , Stress analysis (Engineering) , Temperature distribution
Analysis of Lateral Extrusion of 6061-0 Aluminum by Slip Line Theory Modified to Include Strain-Hardening
P. J. Quenzi, R. W. Kauppila, K. J. Weinmann
J. Eng. Ind. November 1972, 94(4): 971–978. doi: https://doi.org/10.1115/1.3428348
View articletitled, Analysis of Lateral Extrusion of 6061-0 Aluminum by Slip Line Theory Modified to Include Strain-Hardening
Open the PDF for in another window
Topics: Aluminum , Extruding , Work hardening , Flow (Dynamics) , Strength (Materials) , Stress , Symmetry (Physics) , Theorems (Mathematics)
Enhancement of Tungsten-Carbide Tool Life by Oxide Treatment
N. P. Suh, S. Shyam, S. K. Naik
J. Eng. Ind. November 1972, 94(4): 979–984. doi: https://doi.org/10.1115/1.3428349
View articletitled, Enhancement of Tungsten-Carbide Tool Life by Oxide Treatment
Open the PDF for in another window
Topics: Tungsten , Temperature , Carbide cutting tools , Aluminum , Diffusion (Physics) , Friction , Sintering , Titanium , Vacuum , Wear
Analysis of Chatter Vibration Through Step-Function Response
H. Takeyama, O. Sakata
J. Eng. Ind. November 1972, 94(4): 985–990. doi: https://doi.org/10.1115/1.3428350
View articletitled, Analysis of Chatter Vibration Through Step-Function Response
Open the PDF for in another window
Topics: Chatter , Vibration , Cutting , Approximation , Machine tools , Simulation
A Theoretical Analysis of Temperature Distributions in the High Speed Forging of Hot Steel
J. H. L. The, R. F. Scrutton
J. Eng. Ind. November 1972, 94(4): 991–998. doi: https://doi.org/10.1115/1.3428351
View articletitled, A Theoretical Analysis of Temperature Distributions in the High Speed Forging of Hot Steel
Open the PDF for in another window
Topics: Forging , Steel , Temperature distribution , Theoretical analysis , Flow (Dynamics) , Heat conduction , Boundary layers , Cavities , Corners (Structural elements) , Heat
Optimization of Inertia Welding Process by Response Surface Methodology
K. K. Wang, G. Rasmussen
J. Eng. Ind. November 1972, 94(4): 999–1006. doi: https://doi.org/10.1115/1.3428352
View articletitled, Optimization of Inertia Welding Process by Response Surface Methodology
Open the PDF for in another window
Topics: Friction welding , Optimization , Response surface methodology , Welding , Carbon , Deformation , Steel
Exhaust Vent Silencer Design
C. L. Meador, J. J. Allan, III
J. Eng. Ind. November 1972, 94(4): 1007–1019. doi: https://doi.org/10.1115/1.3428281
View articletitled, Exhaust Vent Silencer Design
Open the PDF for in another window
Topics: Design , Exhaust systems , Silencers , Vents , Acoustics , Cloud chambers , Noise (Sound) , Algorithms , High pressure (Physics) , High temperature
Short-Time Acceptance Test for Machine Tools Based on the Random Nature of the Cutting Forces
M. O. M. Osman, T. S. Sankar
J. Eng. Ind. November 1972, 94(4): 1020–1024. doi: https://doi.org/10.1115/1.3428282
View articletitled, Short-Time Acceptance Test for Machine Tools Based on the Random Nature of the Cutting Forces
Open the PDF for in another window
Topics: Cutting , Machine tools , Machinery , Stiffness , Damping , Dynamic response , Excitation , Finishing , Fokker-Planck equation , Grinding
Modular Analysis of Geometry and Stresses in Closed-Die Forging: Application to a Structural Part
N. Akgerman, T. Altan
J. Eng. Ind. November 1972, 94(4): 1025–1034. doi: https://doi.org/10.1115/1.3428283
View articletitled, Modular Analysis of Geometry and Stresses in Closed-Die Forging: Application to a Structural Part
Open the PDF for in another window
Topics: Forging , Geometry , Stress , Friction , Aircraft , Aluminum , Blocks (Building materials) , Flow (Dynamics) , Forgings (Products) , Shapes
Plastic Indentation of Steel Cylinders With Circular Punches
M. M. Sehgal, Shiro Kobayashi
J. Eng. Ind. November 1972, 94(4): 1035–1043. doi: https://doi.org/10.1115/1.3428286
View articletitled, Plastic Indentation of Steel Cylinders With Circular Punches
Open the PDF for in another window
Topics: Cylinders , Steel , Deformation , Dimensions , Displacement , Flow (Dynamics) , Fracture (Process) , Stress
On the Mechanics of Rectilinear Continuous Cutting With a Single Point Tool
W. A. Morcos
J. Eng. Ind. November 1972, 94(4): 1045–1052. doi: https://doi.org/10.1115/1.3428289
View articletitled, On the Mechanics of Rectilinear Continuous Cutting With a Single Point Tool
Open the PDF for in another window
Topics: Cutting , Shear (Mechanics) , Displacement , Flow (Dynamics) , Friction
Conical Acrylic Windows Under Long-Term Hydrostatic Pressure of 10,000 psi
J. D. Stachiw
J. Eng. Ind. November 1972, 94(4): 1053–1059. doi: https://doi.org/10.1115/1.3428292
View articletitled, Conical Acrylic Windows Under Long-Term Hydrostatic Pressure of 10,000 psi
Open the PDF for in another window
Topics: Cavities , Displacement , Flanges , Hydrostatic pressure , Hydrostatics , Oceans , Plastic windows , Pressure , Temperature
The Use of Superplastic Alloy of the Eutectic of Lead–Tin for the Analysis of Hot Extrusion Process
A. H. Shabaik, A. M. Virani
J. Eng. Ind. November 1972, 94(4): 1060–1066. doi: https://doi.org/10.1115/1.3428295
View articletitled, The Use of Superplastic Alloy of the Eutectic of Lead–Tin for the Analysis of Hot Extrusion Process
Open the PDF for in another window
Topics: Alloys , Extruding , Flow (Dynamics) , Eutectic alloys , Materials properties , Mechanical properties , Steel , Superplasticity , Temperature
Multicomponent Calibration of Machine-Tool Dynamometers
R. Levi
J. Eng. Ind. November 1972, 94(4): 1067–1071. doi: https://doi.org/10.1115/1.3428296
View articletitled, Multicomponent Calibration of Machine-Tool Dynamometers
Open the PDF for in another window
Topics: Calibration , Dynamometers , Machine tools , Response surface methodology , Cutting , Jigs and fixtures , Machining , Signals , Stress , Wind tunnels
A Distortion Energy Failure Theory for Orthotropic Materials
G. W. Forman
J. Eng. Ind. November 1972, 94(4): 1073–1076. doi: https://doi.org/10.1115/1.3428299
View articletitled, A Distortion Energy Failure Theory for Orthotropic Materials
Open the PDF for in another window
Topics: Failure , Stress , Algebra
Impact Extrusion—Upper Bound Analysis of the Early Stage
B. Avitzur, E. D. Bishop, W. C. Hahn, Jr.
J. Eng. Ind. November 1972, 94(4): 1079–1086. doi: https://doi.org/10.1115/1.3428305
View articletitled, Impact Extrusion—Upper Bound Analysis of the Early Stage
Open the PDF for in another window
Topics: Extruding , Friction , Geometry , Lubrication , Pressure
Stylus Tracer Resolution and Surface Damage as Determined by Scanning Electron Microscopy
J. L. Guerrero, J. T. Black
J. Eng. Ind. November 1972, 94(4): 1087–1093. doi: https://doi.org/10.1115/1.3428308
View articletitled, Stylus Tracer Resolution and Surface Damage as Determined by Scanning Electron Microscopy
Open the PDF for in another window
Topics: Damage , Resolution (Optics) , Scanning electron microscopy , Instrumentation , Needles , Inspection , Magnification , Microhardness , Reliability , Scanning electron microscopes
Water Reuse in the Food Processing Industry
T. S. Allen
J. Eng. Ind. November 1972, 94(4): 1094–1098. doi: https://doi.org/10.1115/1.3428309
View articletitled, Water Reuse in the Food Processing Industry
Open the PDF for in another window
Topics: Food processing industry , Water reuse
A Probabilistic Approach to the Determination of the Optimum Cutting Conditions
K. Iwata, Y. Murotsu, T. Iwatsubo, S. Fujii
J. Eng. Ind. November 1972, 94(4): 1099–1107. doi: https://doi.org/10.1115/1.3428310
View articletitled, A Probabilistic Approach to the Determination of the Optimum Cutting Conditions
Open the PDF for in another window
Topics: Cutting , Computer programming , Uncertainty
Upper-Bound Solutions to Tube Extrusion Problems Through Curved Dies
K. T. Chang, J. C. Choi
J. Eng. Ind. November 1972, 94(4): 1108–1111. doi: https://doi.org/10.1115/1.3428311
View articletitled, Upper-Bound Solutions to Tube Extrusion Problems Through Curved Dies
Open the PDF for in another window
Topics: Extruding , Friction , Geometry
Shape and Flatness in Thin Strip Rolling
H. W. O’Connor, A. S. Weinstein
J. Eng. Ind. November 1972, 94(4): 1113–1123. doi: https://doi.org/10.1115/1.3428313
View articletitled, Shape and Flatness in Thin Strip Rolling
Open the PDF for in another window
Topics: Shapes , Strips , Flow (Dynamics) , Cold rolling , Rolling mills
A Solution of the Free Oblique Continuous Cutting Problem in Conditions of Light Friction at Chip-Tool Interface
W. A. Morcos
J. Eng. Ind. November 1972, 94(4): 1124–1129. doi: https://doi.org/10.1115/1.3428316
View articletitled, A Solution of the Free Oblique Continuous Cutting Problem in Conditions of Light Friction at Chip-Tool Interface
Open the PDF for in another window
Topics: Cutting , Friction , Deformation , Flow (Dynamics) , Plane strain
Optimum Design of Composite Multilayer Shell Structures
E. G. Menkes, G. N. Sandor, L. R. Wang
J. Eng. Ind. November 1972, 94(4): 1131–1141. doi: https://doi.org/10.1115/1.3428319
View articletitled, Optimum Design of Composite Multilayer Shell Structures
Open the PDF for in another window
Topics: Composite materials , Design , Shells , Stress , Cylinders , Fiber reinforced composites , Trusses (Building) , Aluminum , Buckling , Carbon
A Study of Temperature Gradients Inside a Horizontal Cylinder With Heated and Recirculated Diving Gas Mixtures
L. S. Linderoth, Jr., D. P. Werner, R. L. Bentz
J. Eng. Ind. November 1972, 94(4): 1142–1148. doi: https://doi.org/10.1115/1.3428320
View articletitled, A Study of Temperature Gradients Inside a Horizontal Cylinder With Heated and Recirculated Diving Gas Mixtures
Open the PDF for in another window
Topics: Cylinders , Temperature gradient , Flow (Dynamics) , Heat transfer , Helium , Hyperbaric chambers , Instrumentation , Oxygen , Temperature profiles
An Analysis of Deformation Characteristics and Interfacial Friction Conditions in Simple Upsetting of Rings
J. Y. Liu
J. Eng. Ind. November 1972, 94(4): 1149–1155. doi: https://doi.org/10.1115/1.3428321
View articletitled, An Analysis of Deformation Characteristics and Interfacial Friction Conditions in Simple Upsetting of Rings
Open the PDF for in another window
Topics: Deformation , Friction , Stress , Anisotropy , Work hardening
Analysis and Design of a Drill Grinder and Evaluation of Grinding Parameters
S. Fujii, M. F. DeVries, S. M. Wu
J. Eng. Ind. November 1972, 94(4): 1157–1163. doi: https://doi.org/10.1115/1.3428324
View articletitled, Analysis and Design of a Drill Grinder and Evaluation of Grinding Parameters
Open the PDF for in another window
Topics: Design , Drills (Tools) , Grinding , Tool grinders , Geometry , Computer-aided engineering , Cutting , Engineering prototypes , Thrust , Torque
A Rational Approach for Designing Gray Iron Components
H. R. Jhansale, R. Green, T. H. Topper
J. Eng. Ind. November 1972, 94(4): 1164–1170. doi: https://doi.org/10.1115/1.3428325
View articletitled, A Rational Approach for Designing Gray Iron Components
Open the PDF for in another window
Topics: Design , Gray iron , Deformation , Design methodology , Safety , Stress , Tensile strength
S3—New Type of High-Performance Semisubmerged Ship
T. G. Lang
J. Eng. Ind. November 1972, 94(4): 1171–1177. doi: https://doi.org/10.1115/1.3428328
View articletitled, S<sup>3</sup>—New Type of High-Performance Semisubmerged Ship
Open the PDF for in another window
Topics: Ships , Hull , Aircraft , Automatic control , Dynamic stability , Fins , Stability , Submersibles , Water , Weapons
Design of a Flash Stage for a Multistage Flash Evaporator
T. R. Best
J. Eng. Ind. November 1972, 94(4): 1179–1187. doi: https://doi.org/10.1115/1.3428330
View articletitled, Design of a Flash Stage for a Multistage Flash Evaporator
Open the PDF for in another window
Topics: Design , Machinery , Mass transfer
Analysis of Friction in Ring Compression: A Factorial Experiment
A. Mulc, S. Kalpakjian
J. Eng. Ind. November 1972, 94(4): 1189–1192. doi: https://doi.org/10.1115/1.3428333
View articletitled, Analysis of Friction in Ring Compression: A Factorial Experiment
Open the PDF for in another window
Topics: Compression , Friction , Deformation , Temperature , Aluminum , Aluminum alloys , Lubricants , Surface roughness
A General Method for Kineto-Elastodynamic Analysis and Synthesis of Mechanisms
A. G. Erdman, G. N. Sandor, R. G. Oakberg
J. Eng. Ind. November 1972, 94(4): 1193–1205. doi: https://doi.org/10.1115/1.3428335
View articletitled, A General Method for Kineto-Elastodynamic Analysis and Synthesis of Mechanisms
Open the PDF for in another window
Topics: Coulombs , Deformation , Elastodynamics , Errors , Fluctuations (Physics) , Friction , Inertia (Mechanics) , Rotation , Stress , Structural analysis
An Experimental Study of Thermal Aspects of Cylindrical Plunge Grinding
D. G. Lee, R. D. Zerkle, N. R. DesRuisseaux
J. Eng. Ind. November 1972, 94(4): 1206–1213. doi: https://doi.org/10.1115/1.3428338
View articletitled, An Experimental Study of Thermal Aspects of Cylindrical Plunge Grinding
Open the PDF for in another window
Topics: Grinding , Temperature , Fluids , Heat transfer coefficients , Temperature distribution , Temperature effects , Transients (Dynamics)
On the Metal Physical Considerations in the Machining of Metals
S. Ramalingam, J. T. Black
J. Eng. Ind. November 1972, 94(4): 1215–1224. doi: https://doi.org/10.1115/1.3428342
View articletitled, On the Metal Physical Considerations in the Machining of Metals
Open the PDF for in another window
Topics: Machining , Metals , Deformation , Dislocations , Recrystallization , Work hardening , Atoms , Collisions (Physics) , Dislocation interactions , Equilibrium (Physics)
Computer-Aided Visioplasticity Solution to Axisymmetric Extrusion Through Curved Boundaries
A. H. Shabaik
J. Eng. Ind. November 1972, 94(4): 1225–1230. doi: https://doi.org/10.1115/1.3428343
View articletitled, Computer-Aided Visioplasticity Solution to Axisymmetric Extrusion Through Curved Boundaries
Open the PDF for in another window
Topics: Computer-aided engineering , Extruding , Equilibrium (Physics) , Flow (Dynamics) , Materials properties , Plasticity , Stress , Superplasticity

Discussions

Discussion: “Modular Analysis of Geometry and Stresses in Closed-Die Forging: Application to a Structural Part” (Akgerman, N., and Altan, T., 1972, ASME J. Eng. Ind., 94, pp. 1025–1034)
A. L. Hoffmanner, W. D. Spiegelberg
J. Eng. Ind. November 1972, 94(4): 1034. doi: https://doi.org/10.1115/1.3428284
View articletitled, Discussion: “Modular Analysis of Geometry and Stresses in Closed-Die Forging: Application to a Structural Part” (Akgerman, N., and Altan, T., 1972, ASME J. Eng. Ind., 94, pp. 1025–1034)
Open the PDF for in another window
Topics: Forging , Geometry , Stress
Closure to “Discussion of ‘Modular Analysis of Geometry and Stresses in Closed-Die Forging: Application to a Structural Part’” (1972, ASME J. Eng. Ind., 94, p. 1034)
N. Akgerman, T. Altan
J. Eng. Ind. November 1972, 94(4): 1034. doi: https://doi.org/10.1115/1.3428285
View articletitled, Closure to “Discussion of ‘Modular Analysis of Geometry and Stresses in Closed-Die Forging: Application to a Structural Part’” (1972, ASME J. Eng. Ind., 94, p. 1034)
Open the PDF for in another window
Topics: Forging , Geometry , Stress
Discussion: “Plastic Indentation of Steel Cylinders With Circular Punches” (Sehgal, M. M., and Kobayashi, Shiro, 1972, ASME J. Eng. Ind., 94, pp. 1035–1043)
M. L. Devenpeck
J. Eng. Ind. November 1972, 94(4): 1043–1044. doi: https://doi.org/10.1115/1.3428287
View articletitled, Discussion: “Plastic Indentation of Steel Cylinders With Circular Punches” (Sehgal, M. M., and Kobayashi, Shiro, 1972, ASME J. Eng. Ind., 94, pp. 1035–1043)
Open the PDF for in another window
Topics: Cylinders , Steel
Closure to “Discussion of ‘Plastic Indentation of Steel Cylinders With Circular Punches’” (1972, ASME J. Eng. Ind., 94, pp. 1043–1044)
M. M. Sehgal, Shiro Kobayashi
J. Eng. Ind. November 1972, 94(4): 1044. doi: https://doi.org/10.1115/1.3428288
View articletitled, Closure to “Discussion of ‘Plastic Indentation of Steel Cylinders With Circular Punches’” (1972, ASME J. Eng. Ind., 94, pp. 1043–1044)
Open the PDF for in another window
Topics: Cylinders , Steel
Discussion: “On the Mechanics of Rectilinear Continuous Cutting With a Single Point Tool” (Morcos, W. A., 1972, ASME J. Eng. Ind., 94, pp. 1045–1052)
W. K. Luk
J. Eng. Ind. November 1972, 94(4): 1052. doi: https://doi.org/10.1115/1.3428290
View articletitled, Discussion: “On the Mechanics of Rectilinear Continuous Cutting With a Single Point Tool” (Morcos, W. A., 1972, ASME J. Eng. Ind., 94, pp. 1045–1052)
Open the PDF for in another window
Topics: Cutting
Closure to “Discussion of ‘On the Mechanics of Rectilinear Continuous Cutting With a Single Point Tool’” (1972, ASME J. Eng. Ind., 94, p. 1052)
W. A. Morcos
J. Eng. Ind. November 1972, 94(4): 1052. doi: https://doi.org/10.1115/1.3428291
View articletitled, Closure to “Discussion of ‘On the Mechanics of Rectilinear Continuous Cutting With a Single Point Tool’” (1972, ASME J. Eng. Ind., 94, p. 1052)
Open the PDF for in another window
Topics: Cutting
Discussion: “Conical Acrylic Windows Under Long-Term Hydrostatic Pressure of 10,000 psi” (Stachiw, J. D., 1972, ASME J. Eng. Ind., 94, pp. 1053–1059)
J. L. Akterson
J. Eng. Ind. November 1972, 94(4): 1059. doi: https://doi.org/10.1115/1.3428293
View articletitled, Discussion: “Conical Acrylic Windows Under Long-Term Hydrostatic Pressure of 10,000 psi” (Stachiw, J. D., 1972, ASME J. Eng. Ind., 94, pp. 1053–1059)
Open the PDF for in another window
Topics: Hydrostatic pressure
Closure to “Discussion of ‘Conical Acrylic Windows Under Long-Term Hydrostatic Pressure of 10,000 psi’” (1972, ASME J. Eng. Ind., 94, p. 1059)
J. D. Stachiw
J. Eng. Ind. November 1972, 94(4): 1059. doi: https://doi.org/10.1115/1.3428294
View articletitled, Closure to “Discussion of ‘Conical Acrylic Windows Under Long-Term Hydrostatic Pressure of 10,000 psi’” (1972, ASME J. Eng. Ind., 94, p. 1059)
Open the PDF for in another window
Topics: Hydrostatic pressure
Discussion: “Multicomponent Calibration of Machine-Tool Dynamometers” (Levi, R., 1972, ASME J. Eng. Ind., 94, pp. 1067–1071)
J. Gaindhar, A. O. Schmidt
J. Eng. Ind. November 1972, 94(4): 1071. doi: https://doi.org/10.1115/1.3428297
View articletitled, Discussion: “Multicomponent Calibration of Machine-Tool Dynamometers” (Levi, R., 1972, ASME J. Eng. Ind., 94, pp. 1067–1071)
Open the PDF for in another window
Topics: Calibration , Dynamometers , Machine tools
Closure to “Discussion of ‘Multicomponent Calibration of Machine-Tool Dynamometers’” (1972, ASME J. Eng. Ind., 94, p. 1071)
R. Levi
J. Eng. Ind. November 1972, 94(4): 1072. doi: https://doi.org/10.1115/1.3428298
View articletitled, Closure to “Discussion of ‘Multicomponent Calibration of Machine-Tool Dynamometers’” (1972, ASME J. Eng. Ind., 94, p. 1071)
Open the PDF for in another window
Topics: Calibration , Machine tools
Discussion: “A Distortion Energy Failure Theory for Orthotropic Materials” (Forman, G. W., 1972, ASME J. Eng. Ind., 94, pp. 1073–1076)
W. E. Arnoldi
J. Eng. Ind. November 1972, 94(4): 1076–1077. doi: https://doi.org/10.1115/1.3428300
View articletitled, Discussion: “A Distortion Energy Failure Theory for Orthotropic Materials” (Forman, G. W., 1972, ASME J. Eng. Ind., 94, pp. 1073–1076)
Open the PDF for in another window
Topics: Failure
Discussion: “A Distortion Energy Failure Theory for Orthotropic Materials” (Forman, G. W., 1972, ASME J. Eng. Ind., 94, pp. 1073–1076)
T. A. Cruse
J. Eng. Ind. November 1972, 94(4): 1077. doi: https://doi.org/10.1115/1.3428301
View articletitled, Discussion: “A Distortion Energy Failure Theory for Orthotropic Materials” (Forman, G. W., 1972, ASME J. Eng. Ind., 94, pp. 1073–1076)
Open the PDF for in another window
Topics: Failure
Discussion: “A Distortion Energy Failure Theory for Orthotropic Materials” (Forman, G. W., 1972, ASME J. Eng. Ind., 94, pp. 1073–1076)
L. L. Durocher, A. N. Palazotto
J. Eng. Ind. November 1972, 94(4): 1077. doi: https://doi.org/10.1115/1.3428302
View articletitled, Discussion: “A Distortion Energy Failure Theory for Orthotropic Materials” (Forman, G. W., 1972, ASME J. Eng. Ind., 94, pp. 1073–1076)
Open the PDF for in another window
Topics: Failure
Discussion: “A Distortion Energy Failure Theory for Orthotropic Materials” (Forman, G. W., 1972, ASME J. Eng. Ind., 94, pp. 1073–1076)
E. J. McBride
J. Eng. Ind. November 1972, 94(4): 1077. doi: https://doi.org/10.1115/1.3428303
View articletitled, Discussion: “A Distortion Energy Failure Theory for Orthotropic Materials” (Forman, G. W., 1972, ASME J. Eng. Ind., 94, pp. 1073–1076)
Open the PDF for in another window
Topics: Failure
Closure to “Discussions of ‘A Distortion Energy Failure Theory for Orthotropic Materials’” (1972, ASME J. Eng. Ind., 94, pp. 1076–1077)
G. W. Forman
J. Eng. Ind. November 1972, 94(4): 1077–1078. doi: https://doi.org/10.1115/1.3428304
View articletitled, Closure to “Discussions of ‘A Distortion Energy Failure Theory for Orthotropic Materials’” (1972, ASME J. Eng. Ind., 94, pp. 1076–1077)
Open the PDF for in another window
Topics: Failure
Discussion: “Impact Extrusion—Upper Bound Analysis of the Early Stage” (Avitzur, B., Bishop, E. D., and Hahn, Jr., W. C., 1972, ASME J. Eng. Ind., 94, pp. 1079–1086)
R. A. Kohser
J. Eng. Ind. November 1972, 94(4): 1086. doi: https://doi.org/10.1115/1.3428306
View articletitled, Discussion: “Impact Extrusion—Upper Bound Analysis of the Early Stage” (Avitzur, B., Bishop, E. D., and Hahn, Jr., W. C., 1972, ASME J. Eng. Ind., 94, pp. 1079–1086)
Open the PDF for in another window
Topics: Extruding
Closure to “Discussion of ‘Impact Extrusion—Upper Bound Analysis of the Early Stage’” (1972, ASME J. Eng. Ind., 94, p. 1086)
B. Avitzur, E. D. Bishop, W. C. Hahn, Jr.
J. Eng. Ind. November 1972, 94(4): 1086. doi: https://doi.org/10.1115/1.3428307
View articletitled, Closure to “Discussion of ‘Impact Extrusion—Upper Bound Analysis of the Early Stage’” (1972, ASME J. Eng. Ind., 94, p. 1086)
Open the PDF for in another window
Topics: Extruding
Discussion: “Upper-Bound Solutions to Tube Extrusion Problems Through Curved Dies” (Chang, K. T., and Choi, J. C., 1972, ASME J. Eng. Ind., 94, pp. 1108–1111)
C. S. Hartley
J. Eng. Ind. November 1972, 94(4): 1112. doi: https://doi.org/10.1115/1.3428312
View articletitled, Discussion: “Upper-Bound Solutions to Tube Extrusion Problems Through Curved Dies” (Chang, K. T., and Choi, J. C., 1972, ASME J. Eng. Ind., 94, pp. 1108–1111)
Open the PDF for in another window
Topics: Extruding
Discussion: “Shape and Flatness in Thin Strip Rolling” (O’Connor, H. W., and Weinstein, A. S., 1972, ASME J. Eng. Ind., 94, pp. 1113–1123)
R. D. Way, J. V. Poplawski
J. Eng. Ind. November 1972, 94(4): 1123. doi: https://doi.org/10.1115/1.3428314
View articletitled, Discussion: “Shape and Flatness in Thin Strip Rolling” (O’Connor, H. W., and Weinstein, A. S., 1972, ASME J. Eng. Ind., 94, pp. 1113–1123)
Open the PDF for in another window
Topics: Shapes , Strips
Closure to “Discussion of ‘Shape and Flatness in Thin Strip Rolling’” (1972, ASME J. Eng. Ind., 94, p. 1123)
H. W. O’Connor, A. S. Weinstein
J. Eng. Ind. November 1972, 94(4): 1123. doi: https://doi.org/10.1115/1.3428315
View articletitled, Closure to “Discussion of ‘Shape and Flatness in Thin Strip Rolling’” (1972, ASME J. Eng. Ind., 94, p. 1123)
Open the PDF for in another window
Topics: Shapes , Strips
Discussion: “A Solution of the Free Oblique Continuous Cutting Problem in Conditions of Light Friction at Chip-Tool Interface” (Morcos, W. A., 1972, ASME J. Eng. Ind., 94, pp. 1124–1129)
R. H. Brown
J. Eng. Ind. November 1972, 94(4): 1129–1130. doi: https://doi.org/10.1115/1.3428317
View articletitled, Discussion: “A Solution of the Free Oblique Continuous Cutting Problem in Conditions of Light Friction at Chip-Tool Interface” (Morcos, W. A., 1972, ASME J. Eng. Ind., 94, pp. 1124–1129)
Open the PDF for in another window
Topics: Cutting , Friction
Closure to “Discussion of ‘A Solution of the Free Oblique Continuous Cutting Problem in Conditions of Light Friction at Chip-Tool Interface’” (1972, ASME J. Eng. Ind., 94, pp. 1129–1130)
W. A. Morcos
J. Eng. Ind. November 1972, 94(4): 1130. doi: https://doi.org/10.1115/1.3428318
View articletitled, Closure to “Discussion of ‘A Solution of the Free Oblique Continuous Cutting Problem in Conditions of Light Friction at Chip-Tool Interface’” (1972, ASME J. Eng. Ind., 94, pp. 1129–1130)
Open the PDF for in another window
Topics: Cutting , Friction
Discussion: “An Analysis of Deformation Characteristics and Interfacial Friction Conditions in Simple Upsetting of Rings” (Liu, J. Y., 1972, ASME J. Eng. Ind., 94, pp. 1149–1155)
Vincent DePierre
J. Eng. Ind. November 1972, 94(4): 1155–1156. doi: https://doi.org/10.1115/1.3428322
View articletitled, Discussion: “An Analysis of Deformation Characteristics and Interfacial Friction Conditions in Simple Upsetting of Rings” (Liu, J. Y., 1972, ASME J. Eng. Ind., 94, pp. 1149–1155)
Open the PDF for in another window
Topics: Deformation , Friction
Closure to “Discussion of ‘An Analysis of Deformation Characteristics and Interfacial Friction Conditions in Simple Upsetting of Rings’” (1972, ASME J. Eng. Ind., 94, pp. 1155–1156)
J. Y. Liu
J. Eng. Ind. November 1972, 94(4): 1156. doi: https://doi.org/10.1115/1.3428323
View articletitled, Closure to “Discussion of ‘An Analysis of Deformation Characteristics and Interfacial Friction Conditions in Simple Upsetting of Rings’” (1972, ASME J. Eng. Ind., 94, pp. 1155–1156)
Open the PDF for in another window
Topics: Deformation , Friction
Discussion: “A Rational Approach for Designing Gray Iron Components” (Jhansale, H. R., Green, R., and Topper, T. H., 1972, ASME J. Eng. Ind., 94, pp. 1164–1170)
M. R. Mitchell
J. Eng. Ind. November 1972, 94(4): 1170. doi: https://doi.org/10.1115/1.3428326
View articletitled, Discussion: “A Rational Approach for Designing Gray Iron Components” (Jhansale, H. R., Green, R., and Topper, T. H., 1972, ASME J. Eng. Ind., 94, pp. 1164–1170)
Open the PDF for in another window
Topics: Design , Gray iron
Closure to “Discussion of ‘A Rational Approach for Designing Gray Iron Components’” (1972, ASME J. Eng. Ind., 94, p. 1170)
H. R. Jhansale, R. Green, T. H. Topper
J. Eng. Ind. November 1972, 94(4): 1170. doi: https://doi.org/10.1115/1.3428327
View articletitled, Closure to “Discussion of ‘A Rational Approach for Designing Gray Iron Components’” (1972, ASME J. Eng. Ind., 94, p. 1170)
Open the PDF for in another window
Topics: Design , Gray iron
Discussion: “S3—New Type of High-Performance Semisubmerged Ship” (Lang, T. G., 1972, ASME J. Eng. Ind., 94, pp. 1171–1177)
J. B. Caldwell
J. Eng. Ind. November 1972, 94(4): 1177–1178. doi: https://doi.org/10.1115/1.3428329
View articletitled, Discussion: “S<sup>3</sup>—New Type of High-Performance Semisubmerged Ship” (Lang, T. G., 1972, ASME J. Eng. Ind., 94, pp. 1171–1177)
Open the PDF for in another window
Topics: Ships
Discussion: “Design of a Flash Stage for a Multistage Flash Evaporator” (Best, T. R., 1972, ASME J. Eng. Ind., 94, pp. 1179–1187)
S. K. Fenster
J. Eng. Ind. November 1972, 94(4): 1188. doi: https://doi.org/10.1115/1.3428331
View articletitled, Discussion: “Design of a Flash Stage for a Multistage Flash Evaporator” (Best, T. R., 1972, ASME J. Eng. Ind., 94, pp. 1179–1187)
Open the PDF for in another window
Topics: Design
Closure to “Discussion of ‘Design of a Flash Stage for a Multistage Flash Evaporator’” (1972, ASME J. Eng. Ind., 94, p. 1188)
T. R. Best
J. Eng. Ind. November 1972, 94(4): 1188. doi: https://doi.org/10.1115/1.3428332
View articletitled, Closure to “Discussion of ‘Design of a Flash Stage for a Multistage Flash Evaporator’” (1972, ASME J. Eng. Ind., 94, p. 1188)
Open the PDF for in another window
Topics: Design
Discussion: “Analysis of Friction in Ring Compression: A Factorial Experiment” (Mulc, A., and Kalpakjian, S., 1972, ASME J. Eng. Ind., 94, pp. 1189–1192)
J. A. Schey
J. Eng. Ind. November 1972, 94(4): 1192. doi: https://doi.org/10.1115/1.3428334
View articletitled, Discussion: “Analysis of Friction in Ring Compression: A Factorial Experiment” (Mulc, A., and Kalpakjian, S., 1972, ASME J. Eng. Ind., 94, pp. 1189–1192)
Open the PDF for in another window
Topics: Compression , Friction
Discussion: “A General Method for Kineto-Elastodynamic Analysis and Synthesis of Mechanisms” (Erdman, A. G., Sandor, G. N., and Oakberg, R. G., 1972, ASME J. Eng. Ind., 94, pp. 1193–1205)
R. C. Winfrey
J. Eng. Ind. November 1972, 94(4): 1205. doi: https://doi.org/10.1115/1.3428336
View articletitled, Discussion: “A General Method for Kineto-Elastodynamic Analysis and Synthesis of Mechanisms” (Erdman, A. G., Sandor, G. N., and Oakberg, R. G., 1972, ASME J. Eng. Ind., 94, pp. 1193–1205)
Open the PDF for in another window
Closure to “Discussion of ‘A General Method for Kineto-Elastodynamic Analysis and Synthesis of Mechanisms’” (1972, ASME J. Eng. Ind., 94, p. 1205)
A. G. Erdman, G. N. Sandor, R. G. Oakberg
J. Eng. Ind. November 1972, 94(4): 1205. doi: https://doi.org/10.1115/1.3428337
View articletitled, Closure to “Discussion of ‘A General Method for Kineto-Elastodynamic Analysis and Synthesis of Mechanisms’” (1972, ASME J. Eng. Ind., 94, p. 1205)
Open the PDF for in another window
Discussion: “An Experimental Study of Thermal Aspects of Cylindrical Plunge Grinding” (Lee, D. G., Zerkle, R. D., and DesRuisseaux, N. R., 1972, ASME J. Eng. Ind., 94, pp. 1206–1213)
S. Malkin
J. Eng. Ind. November 1972, 94(4): 1213–1214. doi: https://doi.org/10.1115/1.3428339
View articletitled, Discussion: “An Experimental Study of Thermal Aspects of Cylindrical Plunge Grinding” (Lee, D. G., Zerkle, R. D., and DesRuisseaux, N. R., 1972, ASME J. Eng. Ind., 94, pp. 1206–1213)
Open the PDF for in another window
Topics: Grinding
Discussion: “An Experimental Study of Thermal Aspects of Cylindrical Plunge Grinding” (Lee, D. G., Zerkle, R. D., and DesRuisseaux, N. R., 1972, ASME J. Eng. Ind., 94, pp. 1206–1213)
L. P. Tarasov
J. Eng. Ind. November 1972, 94(4): 1214. doi: https://doi.org/10.1115/1.3428340
View articletitled, Discussion: “An Experimental Study of Thermal Aspects of Cylindrical Plunge Grinding” (Lee, D. G., Zerkle, R. D., and DesRuisseaux, N. R., 1972, ASME J. Eng. Ind., 94, pp. 1206–1213)
Open the PDF for in another window
Topics: Grinding
Closure to “Discussions of ‘An Experimental Study of Thermal Aspects of Cylindrical Plunge Grinding’” (1972, ASME J. Eng. Ind., 94, pp. 1213–1214)
D. G. Lee, R. D. Zerkle, N. R. DesRuisseaux
J. Eng. Ind. November 1972, 94(4): 1214. doi: https://doi.org/10.1115/1.3428341
View articletitled, Closure to “Discussions of ‘An Experimental Study of Thermal Aspects of Cylindrical Plunge Grinding’” (1972, ASME J. Eng. Ind., 94, pp. 1213–1214)
Open the PDF for in another window
Discussion: “Computer-Aided Visioplasticity Solution to Axisymmetric Extrusion Through Curved Boundaries” (Shabaik, A. H., 1972, ASME J. Eng. Ind., 94, pp. 1225–1230)
M. J. Hillier
J. Eng. Ind. November 1972, 94(4): 1230–1231. doi: https://doi.org/10.1115/1.3428344
View articletitled, Discussion: “Computer-Aided Visioplasticity Solution to Axisymmetric Extrusion Through Curved Boundaries” (Shabaik, A. H., 1972, ASME J. Eng. Ind., 94, pp. 1225–1230)
Open the PDF for in another window
Topics: Computer-aided engineering , Extruding
Closure to “Discussion of ‘Computer-Aided Visioplasticity Solution to Axisymmetric Extrusion Through Curved Boundaries’” (1972, ASME J. Eng. Ind., 94, pp. 1230–1231)
A. H. Shabaik
J. Eng. Ind. November 1972, 94(4): 1231. doi: https://doi.org/10.1115/1.3428345
View articletitled, Closure to “Discussion of ‘Computer-Aided Visioplasticity Solution to Axisymmetric Extrusion Through Curved Boundaries’” (1972, ASME J. Eng. Ind., 94, pp. 1230–1231)
Open the PDF for in another window
Topics: Computer-aided engineering , Extruding
All Issues
Estimation of temperature rise in magnetorheological fluid-based finishing of thin substrate: A theoretical and experimental study
J. Manuf. Sci. Eng
Optimizing 3D Laser Foil Printing Parameters for AA 6061: Numerical and Experimental Analysis
J. Manuf. Sci. Eng
Effect of Machining-Induced Deformation and Grain Refinement on Microstructure Evolution in Hybrid Wire-Arc Directed Energy Deposition
J. Manuf. Sci. Eng (October 2024)
HIGH-VOLUME PRODUCTION OF REPEATABLE HIGH ENHANCEMENT SERS SUBSTRATES USING SOLID-STATE SUPERIONIC STAMPING (S4)
J. Manuf. Sci. Eng
Debonding Fiber Damage Mechanism Modelling for Machining Damage Inhibition During Rotary Ultrasonic Face Grinding SiO2f/SiO2
J. Manuf. Sci. Eng
  • Online ISSN 1528-8935
  • Print ISSN 1087-1357

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

  • Crossref Logo
  • Crossref Open Funder Registry Logo
  • Crossref Open Cited-By Logo
  • Crossref Crossmark Logo
  • Crossref Similarity Check Logo
  • Chorus Logo
  • Counter Logo
  • Cope Logo
  • STM Logo
Copyright © 2024 The American Society of Mechanical Engineers
Close Modal
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal
This site uses cookies. By continuing to use our website, you are agreeing to our privacy policy.
Accept