Skip Nav Destination
Issues
August 1974
This article was originally published in
Journal of Engineering for Industry
ISSN 0022-0817
In this Issue
Research Papers
A Displacement Analysis of Spatial Six-Link 4R-P-C Mechanisms—Part 1: Analysis of RCRPRR Mechanism
J. Eng. Ind. August 1974, 96(3): 705–712.
doi: https://doi.org/10.1115/1.3438426
Topics:
Displacement
,
Linkages
,
Polynomials
A Displacement Analysis of Spatial Six-Link 4-R-P-C Mechanisms—Part 2: Derivation of Input-Output Displacement Equation for RCRRPR Mechanism
J. Eng. Ind. August 1974, 96(3): 713–717.
doi: https://doi.org/10.1115/1.3438427
Topics:
Displacement
,
Polynomials
A Displacement Analysis of Spatial Six-Link 4R-P-C Mechanisms—Part 3: Derivation of Input-Output Displacement Equation for RRRPCR Mechanism
J. Eng. Ind. August 1974, 96(3): 718–721.
doi: https://doi.org/10.1115/1.3438428
Topics:
Displacement
,
Polynomials
Determination of Underwater Plate Dynamics Using Laser Beams
J. Eng. Ind. August 1974, 96(3): 722–728.
doi: https://doi.org/10.1115/1.3438429
Topics:
Dynamics (Mechanics)
,
Laser beams
,
Acoustics
,
Holography
,
Blades
,
Displacement
,
Fluids
,
Noise (Sound)
,
Propellers
,
Shapes
Air and Power Requirements for the Vacuum Transport of Crushed Coal in Horizontal Pipelines
J. Eng. Ind. August 1974, 96(3): 729–734.
doi: https://doi.org/10.1115/1.3438430
The Use of Vibration for Material Handling
J. Eng. Ind. August 1974, 96(3): 735–740.
doi: https://doi.org/10.1115/1.3438431
Topics:
Materials handling
,
Vibration
,
Conveyor systems
,
Design
,
Computer software
,
Noise (Sound)
,
Pollution
,
Stiffness
,
Stress
,
Structural analysis
Metering of Solid Materials With Reaction Devices
J. Eng. Ind. August 1974, 96(3): 741–746.
doi: https://doi.org/10.1115/1.3438432
Topics:
Flow (Dynamics)
,
Flow control
,
Flow measurement
,
Instrumentation
Modernization and Expansion of the Ore Handling Facilities at Sparrows Point
J. Eng. Ind. August 1974, 96(3): 747–751.
doi: https://doi.org/10.1115/1.3438433
Topics:
Ore handling
,
Automatic control
,
Construction
,
Innovation
,
Ships
Wheel Drive Systems on Bucket Wheel Machines
J. Eng. Ind. August 1974, 96(3): 752–760.
doi: https://doi.org/10.1115/1.3438434
Elimination of Vibrations in an Ore Unloading Bin
J. Eng. Ind. August 1974, 96(3): 761–764.
doi: https://doi.org/10.1115/1.3438435
Topics:
Vibration
,
Flow (Dynamics)
,
Flow control
,
Granular materials
Clamshell Unloader Reeving Systems
J. Eng. Ind. August 1974, 96(3): 766–772.
doi: https://doi.org/10.1115/1.3438438
Topics:
Building renovation
,
Bulk solids
,
Machinery
,
Ships
Environmental/Power System Considerations—Thyristor Crane Drives
J. Eng. Ind. August 1974, 96(3): 773–777.
doi: https://doi.org/10.1115/1.3438439
Topics:
Cranes
,
Power systems (Machinery)
,
Design
,
Circuits
,
Electronic components
,
Materials handling
,
Packaging
,
Shock (Mechanics)
,
Vibration
Automated Control for Ship Unloaders
J. Eng. Ind. August 1974, 96(3): 778–784.
doi: https://doi.org/10.1115/1.3438440
Topics:
Computer simulation
,
Cycles
,
Ships
A Reversibility Ratio for Pressure Changes in Real Gases
J. Eng. Ind. August 1974, 96(3): 785–787.
doi: https://doi.org/10.1115/1.3438441
Topics:
Gases
,
Pressure
,
Equations of state
Critical Reynolds Number Estimates by Thermo-Dynamic (Stochastic) Methods
J. Eng. Ind. August 1974, 96(3): 788–794.
doi: https://doi.org/10.1115/1.3438442
Topics:
Reynolds number
,
Pipes
,
Probability
,
Shear stress
A Similarity Parameter for Scaling Dynamic Inlet Distortion
J. Eng. Ind. August 1974, 96(3): 795–800.
doi: https://doi.org/10.1115/1.3438443
Topics:
Acoustics
,
Collapse
,
Computation
,
Engines
,
Filters
,
Filtration
,
Pressure
,
Steady state
,
Wave theory of light
An Analysis of the Resonant Frequency of a Motor With a Printed-Circuit Armature
J. Eng. Ind. August 1974, 96(3): 801–806.
doi: https://doi.org/10.1115/1.3438444
The Reduction of Gas Turbine Idle Emissions by Fuel Zoning for Compressor Bleed
J. Eng. Ind. August 1974, 96(3): 807–810.
doi: https://doi.org/10.1115/1.3438445
Topics:
Compressors
,
Emissions
,
Fuels
,
Gas turbines
,
Combustion chambers
,
Engines
,
Nozzles
,
Thrust
,
Turbofans
Prediction and Measurement of Propulsion System Performance
J. Eng. Ind. August 1974, 96(3): 811–819.
doi: https://doi.org/10.1115/1.3438446
Topics:
Propulsion systems
,
Nozzles
,
Design
,
Flow (Dynamics)
,
Form drag
,
Quality control
,
Simulation
Some Stability and Control Aspects of Airframe/Propulsion System Interactions on the YF-12 Airplane
J. Eng. Ind. August 1974, 96(3): 820–826.
doi: https://doi.org/10.1115/1.3438447
Topics:
Aircraft
,
Propulsion systems
,
Stability
,
Damping
,
Jet propulsion
,
Static stability
,
Vehicles
Thermal Stresses in Elastic Plates With Elliptic Holes
J. Eng. Ind. August 1974, 96(3): 827–832.
doi: https://doi.org/10.1115/1.3438448
A Comprehensive Study of the Small Deflections of Thin Rectangular Cantilever Plates Under Point Loading
J. Eng. Ind. August 1974, 96(3): 833–838.
doi: https://doi.org/10.1115/1.3438449
Topics:
Cantilevers
,
Deflection
,
Plates (structures)
,
Cantilever beams
,
Stress
Characterization of the Mechanical Properties of Spring Materials
J. Eng. Ind. August 1974, 96(3): 839–844.
doi: https://doi.org/10.1115/1.3438450
Topics:
Mechanical properties
,
Springs
,
Deformation
,
Stiffness
,
Elastic moduli
,
Energy dissipation
,
Quality control
,
Tensile strength
,
Tensile testing
,
Testing
Lateral Vibrations of a Damped Laminated Hollow Circular Cross-Section Beam
J. Eng. Ind. August 1974, 96(3): 845–852.
doi: https://doi.org/10.1115/1.3438451
On the Relation Between the Factor of Safety and Reliability
J. Eng. Ind. August 1974, 96(3): 853–857.
doi: https://doi.org/10.1115/1.3438452
Topics:
Reliability
,
Safety engineering
,
Design
,
Density
,
Probability
,
Stress
The Design of Complex, Circular, Safety-Rupture Diaphragms
J. Eng. Ind. August 1974, 96(3): 858–862.
doi: https://doi.org/10.1115/1.3438453
Topics:
Design
,
Diaphragms (Mechanical devices)
,
Diaphragms (Structural)
,
Rupture
,
Safety
,
Dimensions
,
Disks
,
Hydrostatic pressure
On Optimum Design of Disk Brakes
J. Eng. Ind. August 1974, 96(3): 863–869.
doi: https://doi.org/10.1115/1.3438454
Topics:
Brakes
,
Design
,
Disks
,
Braking
,
Heat
,
Heat conduction
,
Temperature
Analysis of a Thin Elastic Ring Under Arbitrary Loading
J. Eng. Ind. August 1974, 96(3): 870–876.
doi: https://doi.org/10.1115/1.3438455
Power Loss and Optimum Tensioning of V-Belt Drives
J. Eng. Ind. August 1974, 96(3): 877–885.
doi: https://doi.org/10.1115/1.3438456
Topics:
V-belts
,
Belts
,
Internal friction
,
Friction
,
Pulleys
,
Bending (Stress)
,
Separation (Technology)
,
Stress
Dynamic Analysis of Multi-Rigid-Body Systems
J. Eng. Ind. August 1974, 96(3): 886–892.
doi: https://doi.org/10.1115/1.3438457
Topics:
Computer simulation
,
Dynamic analysis
,
Equations of motion
,
Kinematics
,
Rotation
Conform—A New Concept for the Continuous Extrusion Forming of Metals
J. Eng. Ind. August 1974, 96(3): 893–900.
doi: https://doi.org/10.1115/1.3438458
Topics:
Extruding
,
Metals
,
Wheels
,
Wire
,
Containers
,
Machinery
,
Aluminum
,
Fittings
,
Friction
,
Manufacturing
Void Behavior as Influenced by Pressure and Plastic Deformation
J. Eng. Ind. August 1974, 96(3): 901–911.
doi: https://doi.org/10.1115/1.3438459
Topics:
Deformation
,
Pressure
,
Compression
,
Geometry
,
Hydrostatic pressure
,
Tension
,
Composite materials
,
Copper
,
Extruding
,
Fluids
The Influence of the Interface Condition on the Plastic Deformation Zone and the Resultant Product Integrity in Extrusion
J. Eng. Ind. August 1974, 96(3): 912–916.
doi: https://doi.org/10.1115/1.3438460
Topics:
Deformation
,
Extruding
,
Compacting
,
Alloys
,
Density
,
Flow (Dynamics)
,
Friction
,
Metals
,
Metalworking
,
Theoretical analysis
Analysis and Design of Thin Struts With Large Elastic Displacements: Part 1—Analysis of the Properties of the Solutions of the Nonlinear Differential Equations and the Behavior of the Strut
J. Eng. Ind. August 1974, 96(3): 917–922.
doi: https://doi.org/10.1115/1.3438461
Topics:
Design
,
Nonlinear differential equations
,
Struts (Engineering)
,
Deflection
,
Differential equations
,
Elasticity
,
Engineers
,
Springs
Analysis and Design of Thin Struts With Large Elastic Displacements: Part 2—Design Tables, Curves, and Procedures
J. Eng. Ind. August 1974, 96(3): 923–930.
doi: https://doi.org/10.1115/1.3438462
Topics:
Design
,
Struts (Engineering)
,
Deflection
,
Engineering design
,
Engineers
,
Springs
,
Torsion
An Analytical Solution for the Tapered Arbor Spring Slip Clutch
J. Eng. Ind. August 1974, 96(3): 931–935.
doi: https://doi.org/10.1115/1.3438463
Topics:
Springs
,
Approximation
,
Friction
,
Torque
Concepts of Multiphase Flow Related to the Jenike Design Method
J. Eng. Ind. August 1974, 96(3): 936–939.
doi: https://doi.org/10.1115/1.3438464
Topics:
Design methodology
,
Multiphase flow
,
Flow (Dynamics)
,
Solids
,
Bulk solids
,
Cohesion
,
Friction
,
Bulk solids flow
,
Channel flow
,
Design
Dynamic Vibration Absorbers That Have Increased Effectiveness
J. Eng. Ind. August 1974, 96(3): 940–945.
doi: https://doi.org/10.1115/1.3438465
Topics:
Design
,
Resonance
,
Springs
,
Vibration absorbers
Analysis of Soil Penetration by a Whirl-Excited Probe
J. Eng. Ind. August 1974, 96(3): 946–953.
doi: https://doi.org/10.1115/1.3438466
Topics:
Probes
,
Soil
,
Whirls
,
Design
,
Drag (Fluid dynamics)
,
Engineering prototypes
,
Excitation
,
Excitation systems
,
Friction
,
Steady state
Bounding Solutions for Performance of Vibratory Plows
J. Eng. Ind. August 1974, 96(3): 954–959.
doi: https://doi.org/10.1115/1.3438467
Stability of High Speed Rotors With Internal Friction
J. Eng. Ind. August 1974, 96(3): 960–968.
doi: https://doi.org/10.1115/1.3438468
Topics:
Internal friction
,
Rotors
,
Stability
,
Whirls
,
Damping
,
Stiffness
,
Differential equations
,
Friction
,
Machinery
Equipment for Measuring Complex Moduli of Thin Coatings at Elevated Temperatures
J. Eng. Ind. August 1974, 96(3): 969–975.
doi: https://doi.org/10.1115/1.3438469
Topics:
Coatings
,
Temperature
,
Damping
,
Porcelain
,
Design
,
Enameling
,
Error analysis
,
Fatigue life
,
Gases
,
Metal surfaces
Design of Squeeze Film Damper Supports for Rigid Rotors
J. Eng. Ind. August 1974, 96(3): 976–982.
doi: https://doi.org/10.1115/1.3438470
Topics:
Dampers
,
Design
,
Rotors
,
Bearings
,
Approximation
,
Lubrication
Experimental Synchronization Study of the Gyroscopic Vibration Absorber
J. Eng. Ind. August 1974, 96(3): 983–987.
doi: https://doi.org/10.1115/1.3438471
Topics:
Synchronization
,
Vibration absorbers
,
Equations of motion
,
Excitation
,
Rotational inertia
,
Rotors
Propagation of Elasto-Plastic Stress Waves in Cylindrical High-Pressure Sections
J. Eng. Ind. August 1974, 96(3): 988–993.
doi: https://doi.org/10.1115/1.3438472
Topics:
High pressure (Physics)
,
Stress
,
Waves
,
Cylinders
,
Autofrettage
,
Boundary-value problems
,
Computer software
,
Deformation
,
Displacement
,
Particulate matter
Harmonic Response of Cylindrical Shells
J. Eng. Ind. August 1974, 96(3): 994–999.
doi: https://doi.org/10.1115/1.3438473
Topics:
Pipes
,
Shells
,
Damping
,
Resonance
,
Excitation
,
Steady state
,
Thin shells
Vibration Analysis of a Damped Machinery Foundation Structure Using the Dynamic Stiffness Coupling Technique
J. Eng. Ind. August 1974, 96(3): 1000–1005.
doi: https://doi.org/10.1115/1.3438398
Topics:
Machinery
,
Stiffness
,
Vibration analysis
,
Vibration
,
Dynamic analysis
,
Mechanical impedance
,
Mechanical structures
,
Rubber
A Direct Method for Analysis of Branched Torsional Systems
J. Eng. Ind. August 1974, 96(3): 1006–1009.
doi: https://doi.org/10.1115/1.3438399
Vibration of Frame Foundation With Bilinear Hysteresis for Rotating Machinery
J. Eng. Ind. August 1974, 96(3): 1010–1014.
doi: https://doi.org/10.1115/1.3438400
Topics:
Machinery
,
Vibration
,
Design
,
Displacement
,
Equations of motion
,
Excitation
,
Resonance
Heat Induced Vibration of a Rectangular Plate
J. Eng. Ind. August 1974, 96(3): 1015–1021.
doi: https://doi.org/10.1115/1.3438401
Topics:
Heat
,
Vibration
,
Boundary-value problems
,
Deflection
,
Differential equations
,
Fatigue failure
,
Stress
Dynamic Response of Three-Dimensional Framed Structures
J. Eng. Ind. August 1974, 96(3): 1022–1027.
doi: https://doi.org/10.1115/1.3438402
Topics:
Dynamic response
,
Displacement
,
Excitation
Vibration Analysis of Rotating Compressor Blades
J. Eng. Ind. August 1974, 96(3): 1028–1035.
doi: https://doi.org/10.1115/1.3438403
Topics:
Blades
,
Compressors
,
Vibration analysis
,
Rotation
,
Degrees of freedom
,
Finite element methods
,
Machinery
,
Plates (structures)
,
Potential energy
,
Stiffness
Vibration Characteristics of Free Thin Cylindrical Shells
J. Eng. Ind. August 1974, 96(3): 1036–1040.
doi: https://doi.org/10.1115/1.3438404
Topics:
Pipes
,
Vibration
,
Cylinders
,
Displacement
,
Boundary-value problems
,
Circular cylinders
,
Excitation systems
,
Finite element analysis
,
Shells
Transient Response of Inelastically Constrained Rigid-Body Systems
J. Eng. Ind. August 1974, 96(3): 1041–1047.
doi: https://doi.org/10.1115/1.3438405
Topics:
Equations of motion
,
Hardening
,
Kinematics
,
Shock (Mechanics)
,
Transients (Dynamics)
On Sparse Matrices in Finite Element Wave Propagation
J. Eng. Ind. August 1974, 96(3): 1048–1053.
doi: https://doi.org/10.1115/1.3438406
Topics:
Finite element analysis
,
Wave propagation
,
Computers
,
Finite element methods
,
Manufacturing
,
Storage
Towards the Efficient Vibration Analysis of Shrouded Bladed Disk Assemblies
J. Eng. Ind. August 1974, 96(3): 1054–1059.
doi: https://doi.org/10.1115/1.3438407
Topics:
Disks
,
Vibration analysis
,
Blades
,
Manufacturing
,
Design
,
Junctions
,
Machinery
,
Turbines
,
Turbomachinery
,
Vibration
The Orbital Movement and the Damping of the Fluidelastic Vibration of Tube Banks Due to Vortex Formation: Part 1—The Interplay Between the Self-Excited Vibration of the Single Circular Cylinder and the Karman Vortex
J. Eng. Ind. August 1974, 96(3): 1060–1064.
doi: https://doi.org/10.1115/1.3438408
Topics:
Circular cylinders
,
Damping
,
Vibration
,
Vortices
,
Cylinders
,
Flow (Dynamics)
,
Vortex shedding
,
Vortex street
,
Locks (Waterways)
,
Reynolds number
The Orbital Movement and the Damping of the Fluidelastic Vibration of Tube Banks Due to Vortex Formation: Part 2—Criterion for the Fluidelastic Orbital Vibration of Tube Arrays
J. Eng. Ind. August 1974, 96(3): 1065–1071.
doi: https://doi.org/10.1115/1.3438409
Topics:
Damping
,
Vibration
,
Vortices
,
Cylinders
,
Flow (Dynamics)
,
Roads
,
Separation (Technology)
,
Shear (Mechanics)
,
Symmetry (Physics)
,
Trains
The Orbital Movement and the Damping of the Fluidelastic Vibration of Tube Banks Due to Vortex Formation: Part 3—Damping Capability of the Tube Bank Against Vortex-Excited Sonic Vibration in the Fluid Column
J. Eng. Ind. August 1974, 96(3): 1072–1075.
doi: https://doi.org/10.1115/1.3438410
Topics:
Damping
,
Fluids
,
Vibration
,
Vortices
,
Boilers
,
Design
,
Fuels
,
Heat exchangers
,
Reynolds number
,
Roads
Calculation of Forced Whirling and Stability of Centrifugal Pump Rotor Systems
J. Eng. Ind. August 1974, 96(3): 1076–1081.
doi: https://doi.org/10.1115/1.3438411
Topics:
Centrifugal pumps
,
Rotors
,
Stability
,
Whirls
,
Bearings
,
Flow (Dynamics)
,
Computational methods
,
Diffusers
,
Pressure
,
Pumps
Effect of Hydrostatic Pressure on Corrosion-Fatigue at High Frequency
J. Eng. Ind. August 1974, 96(3): 1085–1088.
doi: https://doi.org/10.1115/1.3438414
Topics:
Corrosion
,
Fatigue
,
Hydrostatic pressure
,
Fracture (Materials)
,
Atmospheric pressure
,
Fracture (Process)
,
Cycles
,
Electrons
,
Oceans
,
Pressure
Semiclosed Cycle Internal Combustion Engine Utilizing Cryogenic Exhaust Solidification for Undersea Applications
J. Eng. Ind. August 1974, 96(3): 1089–1096.
doi: https://doi.org/10.1115/1.3438415
Topics:
Cycles
,
Exhaust systems
,
Internal combustion engines
,
Solidification
,
Oxygen
,
Hardware
,
Heat
,
Design
,
Engines
,
Natural gas
Discussions
Discussion: “Elimination of Vibrations in an Ore Unloading Bin” (Wei, M. L., and Johanson, J. R., 1974, ASME J. Eng. Ind., 96, pp. 761–764)
J. Eng. Ind. August 1974, 96(3): 764–765.
doi: https://doi.org/10.1115/1.3438436
Topics:
Vibration
Closure to “Discussion of ‘Elimination of Vibrations in an Ore Unloading Bin’” (1974, ASME J. Eng. Ind., 96, pp. 764–765)
J. Eng. Ind. August 1974, 96(3): 765.
doi: https://doi.org/10.1115/1.3438437
Topics:
Vibration
Discussion: “Calculation of Forced Whirling and Stability of Centrifugal Pump Rotor Systems” (Black, H. F., 1974, ASME J. Eng. Ind., 96, pp. 1076–1081)
J. Eng. Ind. August 1974, 96(3): 1081–1084.
doi: https://doi.org/10.1115/1.3438412
Topics:
Centrifugal pumps
,
Rotors
,
Stability
,
Whirls
Closure to “Discussion of ‘Calculation of Forced Whirling and Stability of Centrifugal Pump Rotor Systems’” (1974, ASME J. Eng. Ind., 96, pp. 1081–1084)
J. Eng. Ind. August 1974, 96(3): 1084.
doi: https://doi.org/10.1115/1.3438413
Topics:
Centrifugal pumps
,
Rotors
,
Stability
,
Whirls
Discussion: “Inhomogeneous Shearing During Continuous Chip Formation” (Cooke, W. B. H., and Rice, W. B., 1973, ASME J. Eng. Ind., 95, pp. 844–848)
J. Eng. Ind. August 1974, 96(3): 1101.
doi: https://doi.org/10.1115/1.3438418
Topics:
Die cutting
,
Shearing (Deformation)
Discussion: “Inhomogeneous Shearing During Continuous Chip Formation” (Cooke, W. B. H., and Rice, W. B., 1973, ASME J. Eng. Ind., 95, pp. 844–848)
J. Eng. Ind. August 1974, 96(3): 1101–1102.
doi: https://doi.org/10.1115/1.3438419
Topics:
Die cutting
,
Shearing (Deformation)
Closure to “Discussions of ‘Inhomogeneous Shearing During Continuous Chip Formation’” (1974, ASME J. Eng. Ind., 96, pp. 1101–1102)
J. Eng. Ind. August 1974, 96(3): 1102.
doi: https://doi.org/10.1115/1.3438420
Topics:
Die cutting
,
Shearing (Deformation)
Discussion: “Cutting Fluids Performance” (Nagpal, B. K., and Sharma, C. S., 1973, ASME J. Eng. Ind., 95, pp. 881–889)
J. Eng. Ind. August 1974, 96(3): 1102–1103.
doi: https://doi.org/10.1115/1.3438421
Closure to “Discussion of ‘Cutting Fluids Performance’” (1974, ASME J. Eng. Ind., 96, pp. 1102–1103)
J. Eng. Ind. August 1974, 96(3): 1103.
doi: https://doi.org/10.1115/1.3438422
Discussion: “The Optimum Design of Mechanical Systems With Competing Design Objectives” (Bartel, D. L., and Marks, R. W., 1974, ASME J. Eng. Ind., 96, pp. 171–178)
J. Eng. Ind. August 1974, 96(3): 1103.
doi: https://doi.org/10.1115/1.3438423
Topics:
Design
Discussion: “The Optimum Design of Mechanical Systems With Competing Design Objectives” (Bartel, D. L., and Marks, R. W., 1974, ASME J. Eng. Ind., 96, pp. 171–178)
J. Eng. Ind. August 1974, 96(3): 1103–1104.
doi: https://doi.org/10.1115/1.3438424
Topics:
Design
Closure to “Discussions of ‘The Optimum Design of Mechanical Systems With Competing Design Objectives’” (1974, ASME J. Eng. Ind., 96, pp. 1103–1104)
J. Eng. Ind. August 1974, 96(3): 1104.
doi: https://doi.org/10.1115/1.3438425
Topics:
Design
Technical Briefs
Stresses in Cylindrical Tubes Subjected to a Pressure Band
J. Eng. Ind. August 1974, 96(3): 1097–1099.
doi: https://doi.org/10.1115/1.3438416
Stress Relaxation of Tension-Compression Members Having Constant Elongations
J. Eng. Ind. August 1974, 96(3): 1099–1100.
doi: https://doi.org/10.1115/1.3438417
Topics:
Compression
,
Elongation
,
Relaxation (Physics)
,
Stress
,
Tension
,
Creep
Email alerts
RSS Feeds
Special Issue on the State-of-the-Art in Japanese Manufacturing Research
J. Manuf. Sci. Eng
On the Effects of Substrate Temperature on Glass Internal Modification Using Femtosecond Laser Pulses
J. Manuf. Sci. Eng (March 2025)
A Review of Advanced Roll-to-Roll Manufacturing: System Modeling and Control
J. Manuf. Sci. Eng (April 2025)
