Skip to Main Content
American Society of Mechanical Engineers: Digital Collection
Cart
header search
Search
Advanced Search
Skip Nav Destination

Issues

Volume 98, Issue 3
August 1976
This article was originally published in
Journal of Engineering for Industry
Issue Cover
ISSN 0022-0817
In this Issue

Research Papers

Regenerative Drive for Subway Trains—Part 1: Mechanical Accumulator Design
R. C. Flanagan, L. A. Suokas
J. Eng. Ind. August 1976, 98(3): 737–743. doi: https://doi.org/10.1115/1.3439020
View articletitled, Regenerative Drive for Subway Trains—Part 1: Mechanical Accumulator Design
Open the PDF for in another window
Topics: Design , Secondary cells , Subways , Trains , Vehicles , Bearings , Flywheels , Modeling , Power density , Propulsion
Regenerative Drive for Subway Trains—Part 2: Overall System Model
L. A. Suokas, R. C. Flanagan
J. Eng. Ind. August 1976, 98(3): 744–750. doi: https://doi.org/10.1115/1.3439021
View articletitled, Regenerative Drive for Subway Trains—Part 2: Overall System Model
Open the PDF for in another window
Topics: Brakes , Construction , Curbs (Roads) , Cycles , Electric propulsion , Engineering drawings , Flow (Dynamics) , Industrial design , Railroad engineering , Rotors
Regenerative Drive for Subway Trains—Part 3: System Evaluation
R. C. Flanagan, L. A. Suokas
J. Eng. Ind. August 1976, 98(3): 751–755. doi: https://doi.org/10.1115/1.3439022
View articletitled, Regenerative Drive for Subway Trains—Part 3: System Evaluation
Open the PDF for in another window
Topics: Cycles , Secondary cells , Shorelines , Stress , Subways , Trains , Vehicles
Regenerative Drive for Subway Trains—Part 4: Overall System Performance
L. A. Suokas, R. C. Flanagan
J. Eng. Ind. August 1976, 98(3): 756–760. doi: https://doi.org/10.1115/1.3439023
View articletitled, Regenerative Drive for Subway Trains—Part 4: Overall System Performance
Open the PDF for in another window
Topics: Subways , Trains , Vehicles , Computer simulation , Energy consumption , Shorelines , Stress , Weight (Mass)
The Future of Safety and Health: A Challenge to Engineering Managers
George B. Stanton, Jr.
J. Eng. Ind. August 1976, 98(3): 761–765. doi: https://doi.org/10.1115/1.3439024
View articletitled, The Future of Safety and Health: A Challenge to Engineering Managers
Open the PDF for in another window
Topics: Design , Engineering design , Engineers , Health and safety , Safety
A Comprehensive Study of the Fixed Edge Bending Moments of Thin Rectangular Cantilever Plates Under Point Loading
O. L. Hageniers, W. P. T. North
J. Eng. Ind. August 1976, 98(3): 766–772. doi: https://doi.org/10.1115/1.3439025
View articletitled, A Comprehensive Study of the Fixed Edge Bending Moments of Thin Rectangular Cantilever Plates Under Point Loading
Open the PDF for in another window
Topics: Cantilevers , Plates (structures) , Cantilever beams , Deflection , Stress
Eccentric Limit Load on Fasteners
G. A. Fazekas
J. Eng. Ind. August 1976, 98(3): 773–775. doi: https://doi.org/10.1115/1.3439026
View articletitled, Eccentric Limit Load on Fasteners
Open the PDF for in another window
Topics: Fasteners , Stress , Friction , Poles (Building) , Yield strength
On Eccentrically Loaded Fasteners
G. A. Fazekas
J. Eng. Ind. August 1976, 98(3): 776–778. doi: https://doi.org/10.1115/1.3439027
View articletitled, On Eccentrically Loaded Fasteners
Open the PDF for in another window
Topics: Fasteners , Geometry , Optimization , Poles (Building) , Stress
On Optimal Bolt Preload
G. A. Fazekas
J. Eng. Ind. August 1976, 98(3): 779–782. doi: https://doi.org/10.1115/1.3439028
View articletitled, On Optimal Bolt Preload
Open the PDF for in another window
Topics: Bolted joints , Flanges , Tension
On Reciprocating Toroidal Seals
G. A. Fazekas
J. Eng. Ind. August 1976, 98(3): 783–787. doi: https://doi.org/10.1115/1.3439029
View articletitled, On Reciprocating Toroidal Seals
Open the PDF for in another window
Topics: Boundary-value problems , Leakage , Pressure , Shapes
Analytical and Experimental Investigation of a High-Speed Elastic-Membered Linkage
G. H. Sutherland
J. Eng. Ind. August 1976, 98(3): 788–794. doi: https://doi.org/10.1115/1.3439030
View articletitled, Analytical and Experimental Investigation of a High-Speed Elastic-Membered Linkage
Open the PDF for in another window
Topics: Linkages , Deflection , Equations of motion
An Experimental Investigation of Stick-Slip in Hydrostatic Extrusion Using Wax to Simulate Metals
D. Egerton, W. B. Rice
J. Eng. Ind. August 1976, 98(3): 795–799. doi: https://doi.org/10.1115/1.3439031
View articletitled, An Experimental Investigation of Stick-Slip in Hydrostatic Extrusion Using Wax to Simulate Metals
Open the PDF for in another window
Topics: Extruding , Hydrostatics , Metals , Stick-slip , Pressure , Fluctuations (Physics) , Fluid film lubrication , Fluids
Workability of Aluminum Alloy 7075-T6 in Upsetting and Rolling
S. I. Oh, Shiro Kobayashi
J. Eng. Ind. August 1976, 98(3): 800–806. doi: https://doi.org/10.1115/1.3439032
View articletitled, Workability of Aluminum Alloy 7075-T6 in Upsetting and Rolling
Open the PDF for in another window
Topics: Aluminum alloys , Workability , Fracture (Materials) , Fracture (Process) , Dimensions , Friction , Plane strain , Temperature , Tension
Computer Design of a Minimum Vibration Face Milling Cutter Using an Improved Cutting Force Model
P. Doolan, M. S. Phadke, S. M. Wu
J. Eng. Ind. August 1976, 98(3): 807–810. doi: https://doi.org/10.1115/1.3439033
View articletitled, Computer Design of a Minimum Vibration Face Milling Cutter Using an Improved Cutting Force Model
Open the PDF for in another window
Topics: Computers , Cutting , Design , Milling , Vibration , Blades
Epicyclic Gear Vibrations
M. Botman
J. Eng. Ind. August 1976, 98(3): 811–815. doi: https://doi.org/10.1115/1.3439034
View articletitled, Epicyclic Gear Vibrations
Open the PDF for in another window
Topics: Planetary gears , Vibration , Rotation , Gear teeth , Springs , Stiffness
A Generalized Return Vector for Projection Methods in Optimization With Nonlinear Constraints
K. T. A. Ho, M. A. Townsend
J. Eng. Ind. August 1976, 98(3): 816–819. doi: https://doi.org/10.1115/1.3439035
View articletitled, A Generalized Return Vector for Projection Methods in Optimization With Nonlinear Constraints
Open the PDF for in another window
Topics: Optimization
Forced Vibrations of Viscoelastic Timoshenko Beams
C. C. Huang, T. C. Huang
J. Eng. Ind. August 1976, 98(3): 820–826. doi: https://doi.org/10.1115/1.3439036
View articletitled, Forced Vibrations of Viscoelastic Timoshenko Beams
Open the PDF for in another window
Topics: Vibration , Boundary-value problems , Free vibrations , Laplace transforms , Damping , Deflection , Differential equations , Eigenfunctions , Mode shapes , Shear (Mechanics)
Modal Truncation of Substructures Used in Free Vibration Analysis
S. K. Tolani, R. D. Rocke
J. Eng. Ind. August 1976, 98(3): 827–834. doi: https://doi.org/10.1115/1.3439037
View articletitled, Modal Truncation of Substructures Used in Free Vibration Analysis
Open the PDF for in another window
Topics: Cantilever beams , Eigenvalues , Errors , Free vibrations , Structural dynamics
Mechanical Separation Phenomena in Picking Mechanisms of Fly-Shuttle Looms
F. D. Hart, B. M. Patel, J. R. Bailey
J. Eng. Ind. August 1976, 98(3): 835–839. doi: https://doi.org/10.1115/1.3439038
View articletitled, Mechanical Separation Phenomena in Picking Mechanisms of Fly-Shuttle Looms
Open the PDF for in another window
Topics: Looms , Separation (Technology) , Damping , Dynamic response , Emissions , Excitation , Noise (Sound) , Springs , Stiffness , Vibration
Spinning Frame Noise Sources
N. D. Stewart, P. D. Emerson, J. R. Bailey
J. Eng. Ind. August 1976, 98(3): 840–844. doi: https://doi.org/10.1115/1.3439039
View articletitled, Spinning Frame Noise Sources
Open the PDF for in another window
Topics: Noise (Sound) , Spin (Aerodynamics) , Spinning (Textile) , Machinery , Noise control , Cylinders , Gears , Pulleys , Textiles , Vacuum equipment
Instrumental Procedures for Analysis of Nonlint Particles in Cotton
R. L. Barker, D. W. Lyons
J. Eng. Ind. August 1976, 98(3): 845–848. doi: https://doi.org/10.1115/1.3439040
View articletitled, Instrumental Procedures for Analysis of Nonlint Particles in Cotton
Open the PDF for in another window
Topics: Particulate matter , Instrumentation
Development of Design Charts for Bolts Preloaded up to the Plastic Range
N. Motosh
J. Eng. Ind. August 1976, 98(3): 849–851. doi: https://doi.org/10.1115/1.3439041
View articletitled, Development of Design Charts for Bolts Preloaded up to the Plastic Range
Open the PDF for in another window
Topics: Design
On the Theory of the Calculation of the Constant Velocity Ball Transmission Joints
N. Bellomo
J. Eng. Ind. August 1976, 98(3): 852–857. doi: https://doi.org/10.1115/1.3439042
View articletitled, On the Theory of the Calculation of the Constant Velocity Ball Transmission Joints
Open the PDF for in another window
Topics: Design , Stress , Torque
Determination of Joint Stiffness in Bolted Connections
Nabil Motosh
J. Eng. Ind. August 1976, 98(3): 858–861. doi: https://doi.org/10.1115/1.3439043
View articletitled, Determination of Joint Stiffness in Bolted Connections
Open the PDF for in another window
Topics: Stiffness
Machine Life Expectation
R. A. Collacott
J. Eng. Ind. August 1976, 98(3): 862–867. doi: https://doi.org/10.1115/1.3439044
View articletitled, Machine Life Expectation
Open the PDF for in another window
Topics: Machinery
Dynamic Properties of a Moving Thread Line
M. A. Moustafa, F. K. Salman
J. Eng. Ind. August 1976, 98(3): 868–875. doi: https://doi.org/10.1115/1.3439045
View articletitled, Dynamic Properties of a Moving Thread Line
Open the PDF for in another window
Topics: Thread , String , Tension , Partial differential equations , Vibration , Waves
A Modal Transient Rotordynamic Model for Dual-Rotor Jet Engine Systems
D. W. Childs
J. Eng. Ind. August 1976, 98(3): 876–882. doi: https://doi.org/10.1115/1.3439046
View articletitled, A Modal Transient Rotordynamic Model for Dual-Rotor Jet Engine Systems
Open the PDF for in another window
Topics: Jet engines , Rotors , Transients (Dynamics) , Damping , Bearings , Simulation models , Blades , Dampers , Simulation , Structural dynamics
Some Aspects of Computer Numerical Control With Reference to Interpolation
D. A. Milner
J. Eng. Ind. August 1976, 98(3): 883–889. doi: https://doi.org/10.1115/1.3439047
View articletitled, Some Aspects of Computer Numerical Control With Reference to Interpolation
Open the PDF for in another window
Topics: Computers , Interpolation
Application of MOIRE Technique to the Determination of Stresses on the Rake Surface of Single Point Cutting Tool Models
R. L. Murty, M. A. Qayyum
J. Eng. Ind. August 1976, 98(3): 890–894. doi: https://doi.org/10.1115/1.3439048
View articletitled, Application of MOIRE Technique to the Determination of Stresses on the Rake Surface of Single Point Cutting Tool Models
Open the PDF for in another window
Topics: Cutting tools , Stress
Vibration Damping Characteristics of Multilayered Beams With Constrained Viscoelastic Layers
N. T. Asnani, B. C. Nakra
J. Eng. Ind. August 1976, 98(3): 895–901. doi: https://doi.org/10.1115/1.3439049
View articletitled, Vibration Damping Characteristics of Multilayered Beams With Constrained Viscoelastic Layers
Open the PDF for in another window
Topics: Damping , Vibration , Stiffness , Weight (Mass) , Displacement , Simply supported beams
A Simplified Technique for Prediction of Collapse Modes in Crash-Impacted Structural Systems
K. J. Saczalski, K. C. Park
J. Eng. Ind. August 1976, 98(3): 902–908. doi: https://doi.org/10.1115/1.3439050
View articletitled, A Simplified Technique for Prediction of Collapse Modes in Crash-Impacted Structural Systems
Open the PDF for in another window
Topics: Collapse , Crashworthiness , Design , Energy management , Linear systems , Shock (Mechanics)
The Effect of Receiver Pressure on the Observed Flow Pattern in the Hydrostatic Extrusion of Bimetal Rods
J. M. Story, B. Avitzur, W. C. Hahn, Jr.
J. Eng. Ind. August 1976, 98(3): 909–913. doi: https://doi.org/10.1115/1.3439051
View articletitled, The Effect of Receiver Pressure on the Observed Flow Pattern in the Hydrostatic Extrusion of Bimetal Rods
Open the PDF for in another window
Topics: Extruding , Flow (Dynamics) , Hydrostatics , Pressure , Rods , Aluminum , Alloys , Atmospheric pressure , Bond strength , Bonding
Semiactive Control of Multimode Vibratory Systems Using the ILSM Concept
D. Karnopp, Ross R. Allen
J. Eng. Ind. August 1976, 98(3): 914–918. doi: https://doi.org/10.1115/1.3439052
View articletitled, Semiactive Control of Multimode Vibratory Systems Using the ILSM Concept
Open the PDF for in another window
Topics: Computer simulation , Dampers , Excitation , Generators , Noise (Sound) , Signals
Dynamic Acceptance Tests for Horizontal Milling Machines Based on a Statistical Theory of Machine Tool Chatter
M. A. El Baradie, M. M. Sadek, S. A. Tobias
J. Eng. Ind. August 1976, 98(3): 919–929. doi: https://doi.org/10.1115/1.3439053
View articletitled, Dynamic Acceptance Tests for Horizontal Milling Machines Based on a Statistical Theory of Machine Tool Chatter
Open the PDF for in another window
Topics: Chatter , Machine tools , Milling machines , Machinery , Electromagnetic scattering , Cutting , Stability
A General Method for Simulating the Flow Dependent Nonlinear Vibrations of Compressor Reed Valves
J. P. Elson, W. Soedel, R. Cohen
J. Eng. Ind. August 1976, 98(3): 930–934. doi: https://doi.org/10.1115/1.3439054
View articletitled, A General Method for Simulating the Flow Dependent Nonlinear Vibrations of Compressor Reed Valves
Open the PDF for in another window
Topics: Compressors , Flow (Dynamics) , Valves , Vibration , Differential equations , Oscillations , Plates (structures) , Refrigeration
Dynamics of a Drifting Buoy-Cable-Array Assembly Used in Submarine Detection
V. J. Modi, A. K. Misra
J. Eng. Ind. August 1976, 98(3): 935–940. doi: https://doi.org/10.1115/1.3439055
View articletitled, Dynamics of a Drifting Buoy-Cable-Array Assembly Used in Submarine Detection
Open the PDF for in another window
Topics: Buoys , Cables , Dynamics (Mechanics) , Manufacturing , Underwater vehicles , Steady state , Eigenvalues
Axisymmetrical Vibrations of Underwater Hemispherical Shells
F. C. Chen, T. C. Huang
J. Eng. Ind. August 1976, 98(3): 941–947. doi: https://doi.org/10.1115/1.3439056
View articletitled, Axisymmetrical Vibrations of Underwater Hemispherical Shells
Open the PDF for in another window
Topics: Boundary-value problems , Differential equations , Fluids , Free vibrations , Mode shapes , Pressure , Shapes , Shells , Spherical shells , Thin shells
Guide Vane Vibrations Caused by Wakes and Blower Noise—Part 1: The Vortex Degeneration in the Asymmetrical Wakes
Y. N. Chen, G. Baylac, R. Walther
J. Eng. Ind. August 1976, 98(3): 948–955. doi: https://doi.org/10.1115/1.3439057
View articletitled, Guide Vane Vibrations Caused by Wakes and Blower Noise—Part 1: The Vortex Degeneration in the Asymmetrical Wakes
Open the PDF for in another window
Topics: Guide vanes , Noise (Sound) , Vibration , Vortices , Wakes , Vortex street , Flat plates , Blades , Cascades (Fluid dynamics) , Locks (Waterways)
Guide Vane Vibrations Caused by Wakes and Blower Noise—Part 2: Transferability From the Model to the Prototype
Y. N. Chen, G. Baylac, R. Walther
J. Eng. Ind. August 1976, 98(3): 956–964. doi: https://doi.org/10.1115/1.3439058
View articletitled, Guide Vane Vibrations Caused by Wakes and Blower Noise—Part 2: Transferability From the Model to the Prototype
Open the PDF for in another window
Topics: Engineering prototypes , Guide vanes , Noise (Sound) , Vibration , Wakes , Resonance , Acoustics , Blades , Damping , Loudspeakers
Effect of Sweep and Drag on Hydrofoil Stability
J. Mahig
J. Eng. Ind. August 1976, 98(3): 965–967. doi: https://doi.org/10.1115/1.3439059
View articletitled, Effect of Sweep and Drag on Hydrofoil Stability
Open the PDF for in another window
Topics: Drag (Fluid dynamics) , Hydrofoil , Stability , Electronics engineers , Flutter (Aerodynamics) , Linear systems , Stiffness , Strength (Materials) , Strips
Transient Torsional Vibration of Steam Turbine and Generator Shafts due to High Speed Reclosing of Electric Power Lines
A. Hizume
J. Eng. Ind. August 1976, 98(3): 968–979. doi: https://doi.org/10.1115/1.3439060
View articletitled, Transient Torsional Vibration of Steam Turbine and Generator Shafts due to High Speed Reclosing of Electric Power Lines
Open the PDF for in another window
Topics: Electricity (Physics) , Generators , Steam turbines , Transients (Dynamics) , Vibration , Torque , Approximation , Computers , Damping , Machinery
Predicting Natural Frequencies of a Hydrodynamically Lubricated Journal Bearing With Constant Oil Supply Pressure
D. C. Edwards, N. Khorzad, C. L. Edwards
J. Eng. Ind. August 1976, 98(3): 980–987. doi: https://doi.org/10.1115/1.3439061
View articletitled, Predicting Natural Frequencies of a Hydrodynamically Lubricated Journal Bearing With Constant Oil Supply Pressure
Open the PDF for in another window
Topics: Journal bearings , Pressure , Bearings , Stress , Equations of motion
Experimental Evaluation of Multiplane-Multispeed Rotor Balancing Through Multiple Critical Speeds
J. M. Tessarzik, R. H. Badgley, D. P. Fleming
J. Eng. Ind. August 1976, 98(3): 988–998. doi: https://doi.org/10.1115/1.3439062
View articletitled, Experimental Evaluation of Multiplane-Multispeed Rotor Balancing Through Multiple Critical Speeds
Open the PDF for in another window
Topics: Rotor balancing , Rotors , Vibration , Bearings , Design , Machinery , Sensors
Surface Integrity in Machining AISI 4340 Steel
J. A. Bailey, S. Jeelani, S. E. Becker
J. Eng. Ind. August 1976, 98(3): 999–1006. doi: https://doi.org/10.1115/1.3439063
View articletitled, Surface Integrity in Machining AISI 4340 Steel
Open the PDF for in another window
Topics: Machining , Steel , Cutting , Damage , Scanning electron microscopy , Temperature , Wear , Cutting tools , Microhardness , Microprobe analysis
Vibration Analysis of Axial Flow Turbine Disks Using Finite Elements
G. J. Wilson, J. Kirkhope
J. Eng. Ind. August 1976, 98(3): 1008–1013. doi: https://doi.org/10.1115/1.3438992
View articletitled, Vibration Analysis of Axial Flow Turbine Disks Using Finite Elements
Open the PDF for in another window
Topics: Axial flow , Disks , Finite element analysis , Turbines , Vibration analysis , Plates (structures) , Deflection , Finite element methods , Rotation , Rotational inertia
Nonlinear Stresses and Deflections of Beams Subjected to Random Time Dependent Uniform Pressure
P. Seide
J. Eng. Ind. August 1976, 98(3): 1014–1020. doi: https://doi.org/10.1115/1.3438993
View articletitled, Nonlinear Stresses and Deflections of Beams Subjected to Random Time Dependent Uniform Pressure
Open the PDF for in another window
Topics: Deflection , Pressure , Stress , Displacement , Excitation , White noise
Optimal Design of a Class of Welded Structures Using Geometric Programming
K. M. Ragsdell, D. T. Phillips
J. Eng. Ind. August 1976, 98(3): 1021–1025. doi: https://doi.org/10.1115/1.3438995
View articletitled, Optimal Design of a Class of Welded Structures Using Geometric Programming
Open the PDF for in another window
Topics: Computer programming , Design , Engineering design
Efficient Optimal Design of Suspension Systems for Rotating Shafts
W. D. Pilkey, B. P. Wang, D. Vannoy
J. Eng. Ind. August 1976, 98(3): 1026–1029. doi: https://doi.org/10.1115/1.3438996
View articletitled, Efficient Optimal Design of Suspension Systems for Rotating Shafts
Open the PDF for in another window
Topics: Design , Suspension systems , Errors , Performance characterization , Rotors
A Linear Programming Approach for Balancing Flexible Rotors
R. M. Little, W. D. Pilkey
J. Eng. Ind. August 1976, 98(3): 1030–1035. doi: https://doi.org/10.1115/1.3438997
View articletitled, A Linear Programming Approach for Balancing Flexible Rotors
Open the PDF for in another window
Topics: Linear programming , Rotors , Computers , Rotor balancing
A Survey of Optimization Methods Applied to the Design of Mechanisms
R. R. Root, K. M. Ragsdell
J. Eng. Ind. August 1976, 98(3): 1036–1041. doi: https://doi.org/10.1115/1.3438999
View articletitled, A Survey of Optimization Methods Applied to the Design of Mechanisms
Open the PDF for in another window
Topics: Design , Optimization
Optimum Design of Automatic Depth Control System for Underwater Divers
A. Baz, A. Seireg
J. Eng. Ind. August 1976, 98(3): 1042–1047. doi: https://doi.org/10.1115/1.3439000
View articletitled, Optimum Design of Automatic Depth Control System for Underwater Divers
Open the PDF for in another window
Topics: Control systems , Design , Buoyancy , Control panels , Pneumatic control , Pressure , Pressure transducers , Signals , Solenoids , Stability
Parameter Optimization of the Steel Grinding Process
R. W. Mayne, S. Malkin
J. Eng. Ind. August 1976, 98(3): 1048–1052. doi: https://doi.org/10.1115/1.3439002
View articletitled, Parameter Optimization of the Steel Grinding Process
Open the PDF for in another window
Topics: Grinding , Optimization , Steel , Grinding wheels , Machining , Nonlinear programming , Surface quality , Tradeoffs , Wear
Suppression of Rotor-Bearing System Vibrations Through Flexible Bearing Support Damping
J. M. Tessarzik, T. Chiang, R. H. Badgley
J. Eng. Ind. August 1976, 98(3): 1053–1061. doi: https://doi.org/10.1115/1.3439003
View articletitled, Suppression of Rotor-Bearing System Vibrations Through Flexible Bearing Support Damping
Open the PDF for in another window
Topics: Bearings , Damping , Rotors , Vibration , Dampers , Random vibration , Journal bearings , Machinery , Turbogenerators , Bending (Stress)
Prediction of Failure in Ductile Machine Elements Operating at Elevated Temperatures
G. M. Kurajian, T. Y. Na
J. Eng. Ind. August 1976, 98(3): 1062–1065. doi: https://doi.org/10.1115/1.3439005
View articletitled, Prediction of Failure in Ductile Machine Elements Operating at Elevated Temperatures
Open the PDF for in another window
Topics: Failure , Machine components , Temperature , Design , Engineering design processes , Mechanical properties , Metals , Steel , Stress
Optimum Reliability at Minimum Cost
R. G. Fenton
J. Eng. Ind. August 1976, 98(3): 1066–1068. doi: https://doi.org/10.1115/1.3439007
View articletitled, Optimum Reliability at Minimum Cost
Open the PDF for in another window
Topics: Reliability , Failure , Optimization , Service life (Equipment)
Design Problem Solving by Functional Analysis and Creativity
S. M. Chohan
J. Eng. Ind. August 1976, 98(3): 1069–1073. doi: https://doi.org/10.1115/1.3439008
View articletitled, Design Problem Solving by Functional Analysis and Creativity
Open the PDF for in another window
Topics: Creativity , Design , Functional analysis , Hardware , Failure , Innovation
The Failure-Experience Matrix—A Useful Design Tool
J. A. Collins, B. T. Hagan, H. M. Bratt
J. Eng. Ind. August 1976, 98(3): 1074–1079. doi: https://doi.org/10.1115/1.3439009
View articletitled, The Failure-Experience Matrix—A Useful Design Tool
Open the PDF for in another window
Topics: Design , Failure , Army , Corrective actions , Failure mechanisms , Helicopters
On The Use of The Extreme Value Distribution in Reliability Analysis and Design
P. H. Wirsching, L. H. Jones
J. Eng. Ind. August 1976, 98(3): 1080–1085. doi: https://doi.org/10.1115/1.3439011
View articletitled, On The Use of The Extreme Value Distribution in Reliability Analysis and Design
Open the PDF for in another window
Topics: Design , Event history analysis , Reliability , Algorithms , Design engineering , Engineers , Risk
The Interaction of Collinear Arrays of Griffith Cracks on Two Radial Lines
O. Aksogan
J. Eng. Ind. August 1976, 98(3): 1086–1091. doi: https://doi.org/10.1115/1.3439012
View articletitled, The Interaction of Collinear Arrays of Griffith Cracks on Two Radial Lines
Open the PDF for in another window
Topics: Fracture (Materials) , Fracture mechanics , Geometry , Integral equations , Polynomials , Stress , Weight (Mass)
Multiple Internal Resonance in a Structure-Liquid System
R. A. Ibrahim
J. Eng. Ind. August 1976, 98(3): 1092–1098. doi: https://doi.org/10.1115/1.3439013
View articletitled, Multiple Internal Resonance in a Structure-Liquid System
Open the PDF for in another window
Topics: Resonance , Containers , Sloshing , Degrees of freedom , Engineering systems and industry applications , Equations of motion , Excitation , Inertia (Mechanics) , Structural failures , Vibration
Physical Interpretations of the Instabilities Encountered in the Deflection Equations of the Unconstrained Pipeline
G. C. Daley
J. Eng. Ind. August 1976, 98(3): 1099–1102. doi: https://doi.org/10.1115/1.3439015
View articletitled, Physical Interpretations of the Instabilities Encountered in the Deflection Equations of the Unconstrained Pipeline
Open the PDF for in another window
Topics: Deflection , Pipelines , Seabed , Tension , Weight (Mass) , Stiffness , Differential equations , Pipeline construction , Pipes
Strength, Permeabilities, and Porosity of Oilwell Foam Cement
C. A. Aldrich, B. J. Mitchell
J. Eng. Ind. August 1976, 98(3): 1103–1106. doi: https://doi.org/10.1115/1.3439016
View articletitled, Strength, Permeabilities, and Porosity of Oilwell Foam Cement
Open the PDF for in another window
Topics: Cements (Adhesives) , Permeability , Porosity
Maximum Moment Capability of Pipe With Various D/T Ratios
P. D. Weiner, S. A. Smith, Jr.
J. Eng. Ind. August 1976, 98(3): 1107–1111. doi: https://doi.org/10.1115/1.3439017
View articletitled, Maximum Moment Capability of Pipe With Various <em>D/T</em> Ratios
Open the PDF for in another window
Topics: Pipes
Casing Collapse Performance
P. Mehdizadeh
J. Eng. Ind. August 1976, 98(3): 1112–1119. doi: https://doi.org/10.1115/1.3439018
View articletitled, Casing Collapse Performance
Open the PDF for in another window
Topics: Collapse , Quenching (Metalworking) , Testing , Manufacturing , Oil well casings , Quality control , Residual stresses

Discussions

Discussion: “Surface Integrity in Machining AISI 4340 Steel” (Bailey, J. A., Jeelani, S., and Becker, S. E., 1976, ASME J. Eng. Ind., 98, pp. 999–1006)
G. Bellows
J. Eng. Ind. August 1976, 98(3): 1006. doi: https://doi.org/10.1115/1.3438986
View articletitled, Discussion: “Surface Integrity in Machining AISI 4340 Steel” (Bailey, J. A., Jeelani, S., and Becker, S. E., 1976, ASME J. Eng. Ind., 98, pp. 999–1006)
Open the PDF for in another window
Topics: Machining , Steel
Discussion: “Surface Integrity in Machining AISI 4340 Steel” (Bailey, J. A., Jeelani, S., and Becker, S. E., 1976, ASME J. Eng. Ind., 98, pp. 999–1006)
J. F. Kahles
J. Eng. Ind. August 1976, 98(3): 1007. doi: https://doi.org/10.1115/1.3438987
View articletitled, Discussion: “Surface Integrity in Machining AISI 4340 Steel” (Bailey, J. A., Jeelani, S., and Becker, S. E., 1976, ASME J. Eng. Ind., 98, pp. 999–1006)
Open the PDF for in another window
Topics: Machining , Steel
Discussion: “Surface Integrity in Machining AISI 4340 Steel” (Bailey, J. A., Jeelani, S., and Becker, S. E., 1976, ASME J. Eng. Ind., 98, pp. 999–1006)
J. Williams
J. Eng. Ind. August 1976, 98(3): 1007. doi: https://doi.org/10.1115/1.3438989
View articletitled, Discussion: “Surface Integrity in Machining AISI 4340 Steel” (Bailey, J. A., Jeelani, S., and Becker, S. E., 1976, ASME J. Eng. Ind., 98, pp. 999–1006)
Open the PDF for in another window
Topics: Machining , Steel
Closure to “Discussions of ‘Surface Integrity in Machining AISI 4340 Steel’” (1976, ASME J. Eng. Ind., 98, pp. 1006–1007)
J. A. Bailey, S. Jeelani, S. E. Becker
J. Eng. Ind. August 1976, 98(3): 1007. doi: https://doi.org/10.1115/1.3438991
View articletitled, Closure to “Discussions of ‘Surface Integrity in Machining AISI 4340 Steel’” (1976, ASME J. Eng. Ind., 98, pp. 1006–1007)
Open the PDF for in another window
Topics: Machining
All Issues
ADDITIVE MANUFACTURING OF WHEAT STRAW FIBERS FOR SUSTAINABLE THERMAL INSULATION APPLICATION
J. Manuf. Sci. Eng
Repurposing Supply Chains and Process Planning Across Products Using a Similarity Model Based on Supernetworks
J. Manuf. Sci. Eng
On-Orbit Processing and Hardware Performance of Microgravity Hydrothermal Synthesis for Graphene Aerogel
J. Manuf. Sci. Eng (December 2024)
Powder Compaction Characteristics and Modeling of Calendering Process for Powder-Based Solvent-Free Manufacturing of Electrodes for Lithium-Ion Batteries
J. Manuf. Sci. Eng (April 2025)
A Review on Metallic Drilling Burrs: Geometry, Formation, and Effect on the Mechanical Strength of Metallic Assemblies
J. Manuf. Sci. Eng (April 2025)
  • Online ISSN 1528-8935
  • Print ISSN 1087-1357

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

  • Crossref Logo
  • Crossref Open Funder Registry Logo
  • Crossref Open Cited-By Logo
  • Crossref Crossmark Logo
  • Crossref Similarity Check Logo
  • Chorus Logo
  • Counter Logo
  • Cope Logo
  • STM Logo
Copyright © 2024 The American Society of Mechanical Engineers
Close Modal
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal
This site uses cookies. By continuing to use our website, you are agreeing to our privacy policy.
Accept