In Part I [1] of this paper, Gurson’s mixed hardening plasticity model with strain and stress-controlled nucleations, was used in a large deformation finite element program to study the plastic flow and damage in the uniaxial compression of cylinders under sticking friction. Due to low stress triaxiality at the bulge of the cylinders, it was found that localization may occur before void coalescence. In this paper, necessary conditions of localizations are analyzed for the axial compression of porous cylinders under sticking friction. Shear band type of localization with a normal mode of fracture has been predicted for the majority of the cases studied. Various existing localization conditions and fracture criteria are assessed using the results from the simulation. The maximum shear stress at failure is approximately constant and a constant critical damage can not be found.
Skip Nav Destination
Article navigation
April 1996
Technical Papers
A Finite-Element Work-Hardening Plasticity Model of the Uniaxial Compression and Subsequent Failure of Porous Cylinders Including Effects of Void Nucleation and Growth—Part II: Localization and Fracture Criteria
J. H. Lee
Department of Mechanical Engineering, University of Alaska Fairbanks, AK 99775
Y. Zhang
Department of Mechanical Engineering, University of Alaska Fairbanks, AK 99775
J. Eng. Mater. Technol. Apr 1996, 118(2): 169-178 (10 pages)
Published Online: April 1, 1996
Article history
Received:
June 10, 1993
Online:
November 27, 2007
Article
Article discussed|
View article
Citation
Lee, J. H., and Zhang, Y. (April 1, 1996). "A Finite-Element Work-Hardening Plasticity Model of the Uniaxial Compression and Subsequent Failure of Porous Cylinders Including Effects of Void Nucleation and Growth—Part II: Localization and Fracture Criteria." ASME. J. Eng. Mater. Technol. April 1996; 118(2): 169–178. https://doi.org/10.1115/1.2804883
Download citation file:
Get Email Alerts
Cited By
Failure Analysis and Piezo-Resistance Response of Intralaminar Glass/Carbon Hybrid Composites Under Blast Loading Conditions
J. Eng. Mater. Technol (January 2025)
Active Constrained Layer Damping of Beams With Natural Fiber Reinforced Viscoelastic Composites
J. Eng. Mater. Technol (January 2025)
High-Temperature Fatigue of Additively Manufactured Inconel 718: A Short Review
J. Eng. Mater. Technol (January 2025)
Related Articles
A Finite-Element Work-Hardening Plasticity Model of the Uniaxial Compression and Subsequent Failure of Porous Cylinders Including Effects of Void Nucleation and Growth—Part I: Plastic Flow and Damage
J. Eng. Mater. Technol (January,1994)
Localization, Delocalization, and Compression Fracture in Moderately Thick Transversely Isotropic Bilinear Rings Under External Pressure
J. Eng. Mater. Technol (October,2006)
Experimental Characterization of Damage Processes in Aluminum AA2024-O
J. Eng. Mater. Technol (July,2010)
Material Behavior in Powder Preform Forging
J. Eng. Mater. Technol (January,1973)
Related Proceedings Papers
Related Chapters
In Situ Observations of the Failure Mechanisms of Hydrided Zircaloy-4
Zirconium in the Nuclear Industry: 20th International Symposium
Understanding the Problem
Design and Application of the Worm Gear
Introduction and Definitions
Handbook on Stiffness & Damping in Mechanical Design