Based on the theory of damage mechanics, a viscoplastic constitutive modeling of anisotropic damage for the prediction of forming limit curve (FLC) is developed. The model takes into account the effect of rotation of principal damage coordinates on the deformation and damage behaviors. With the aid of the damage viscoplastic potential, the damage evolution equations are established. Based on a proposed damage criterion for localized necking, the model is employed to predict the FLC of aluminum 6111-T4 sheet alloy. The predicted results agree well with those determined experimentally.
Issue Section:
Technical Papers
1.
Wang
, J.
, and Chow
, C. L.
, 1989
, “Hysteretic Effects Damage and Stress on Ductile Fracture Characterization
,” Eng. Fract. Mech.
, 34, pp
209
–220
.2.
Chow
, C. L.
, and Chen
, X. F.
, 1992
, “An Anisotropic Model of Damage Mechanics Based on Endochronic Theory of Plasticity
,” Int. J. Fract.
, 55
, pp. 115
–130
.3.
Chaboche
, J. L.
, 1992
, “Damage Induced Anisotropy: On the Difficulties Associated with the Active/Passive Unilateral Condition
,” Int. J. Damage Mech.
, 1
, pp. 148
–171
.4.
Hayakawa
, K.
, and Murakami
, S.
, 1997
, “Thermodynamical Modeling of Elastic-Plastic Damage and Experimental Validation of Damage Potential
,” Int. J. Damage Mech.
, 6
, pp. 333
–363
.5.
Ju
, J. W.
, 1990
, “Isotropic and Anisotropic Damage Variable in Continuum Damage Mechanics
,” J. Eng. Mech.
, 116
, pp. 2764
–2770
.6.
Chow, C. L., Yu L. G., and Demeri, M. Y., 1996, “Prediction of Forming Limit Diagram with Damage Analysis,” SAE Technical Paper Series 960598, pp. 73–80.
7.
Chow
, C. L.
, Yu
, L. G.
, and Demeri
, M. Y.
, 1997
, “A Unified Damage Approach for Predicting Forming Limit Diagrams
,” ASME J. Eng. Mater. Technol.
, 119
, pp. 346
–353
.8.
Laukonis
, J. V.
, and Ghosh
, A. K.
, 1978
, “Effect of Strain Path Changes on the Formability of Sheet Metals
,” Metall. Mater. Trans. A
, 9A
, pp. 1849
–56
.9.
Graf
, A. F.
, and Hosford
, W.
, 1993
, “Calculation of Forming Limit Diagrams for Changing Strain Paths
,” Metall. Mater. Trans. A
, 24a
, pp. 2497
–2501
.10.
Graf
, A. F.
, and Hosford
, W.
, 1994
, “The Influence of Strain-Path Changes on Forming Limit Diagram of AL 6111-T4
,” Int. J. Mech. Sci.
, 36
, pp. 897
–910
.11.
Barata da Rocha
, A.
, Barlat
, F.
, and Jalinier
, J. M.
, 1984
, “Prediction of the Forming Limit Diagram of Anisotropic Sheets in Linear and Nonlinear loading
,” Mater. Sci. Eng.
, 68
, pp. 151
–164
.12.
Stoughton T. B., 2000, “Stress-based Forming Limits in Sheet Metal Forming,” 2000 ASME International Mechanical Engineering Congress and Exposition, Proceedings of the ASME Manufacturing in Engineering Division-2000, MED-11, pp. 713–720.
13.
Chen
, X. F.
, and Chow
, C. L.
, 1995
, “On Damage Strain Energy Release Rate Y
,” Int. J. Damage Mech.
, 4
, No. 3
, pp. 251
–263
.14.
Hill, R. 1950, The Mathematical Theory of Plasticity, Oxford University Press, NY.
15.
Parmar
, A.
, and Mellor
, P. B.
, 1980
, “Growth of Voids in Biaxial Stress Fields
,” Int. J. Mech. Sci.
, 22
, pp. 133
–150
.16.
Schmitt
, J. H.
, and Jalinier
, J. M.
, 1982
, “Damage in Sheet Metal Forming-I. Physical Behavior
,” Acta Metall.
, 30
, pp. 1789
–1798
.17.
Schmitt
, J. H.
, and Jalinier
, J. M.
, 1982
, “Damage in Sheet Metal Forming-II. Plastic Instability
,” Acta Metall.
, 30
, pp. 1799
–1809
.Copyright © 2001
by ASME
You do not currently have access to this content.
