The objective of this study is to predict the Brinell hardness distribution in cold formed parts by relating the plastic strains found by finite element (FE) analysis to hardness. Based on the material’s plastic flow curve, an analytical relation was established between the plastic strain induced in the metal during cold working and its Brinell hardness so that its hardness can be determined from numerically obtained plastic strains without producing the part and taking measurements. In order to verify the model developed in this study, cold extrusion experiments were performed on samples made of two different metals at five different extrusion ratios. These samples were cut, and at their centers Brinell hardness measurements were taken, which were then compared with the analytical predictions. The results of the analytical model compared quite well with the data obtained from experiments. The model was also verified by comparing its predictions with the experimentally determined values of hardness reported by previous researchers. The results showed that within the applicable range of Brinell hardness test, which covers a great percentage of hardness levels resulting from cold forming operations, the analytical model can reliably be used.

Issue Section:
Research Papers
Keywords:
steel, hardness, hardness testing, cold working, plastic flow, forming processes, extrusion, finite element analysis, Brinell Hardness, Flow Curve, Effective Strain, Spherical Indentation, Cold Forming, Extrusion, Plastic Deformation, Steels
Topics:
Deformation, Extruding, Flow (Dynamics), Steel, Work hardening, Finite element analysis
1.
Kim
,
H.
,
Lee
,
S.-M.
, and
Altan
,
T.
,
1996
, “
Prediction of Hardness Distribution in Cold Backward Extruded Cups
,”
J. Mater. Process. Technol.
,
59
, pp.
113
–
121
.
2.
Gouveia
,
B. P. P. A.
,
Rodrigues
,
J. M. C.
, and
Martins
,
P. A. F.
,
1998
, “
Steady State Finite-Element Analysis of Cold Forward Extrusion
,”
J. Mater. Process. Technol.
,
73
, pp.
281
–
288
.
3.
Gouveia
,
B. P. P. A.
,
Rodrigues
,
J. M. C.
, and
Martins
,
P. A. F.
,
1998
, “
Finite Element Modeling of Cold Forward Extrusion and Combined Eulerian—Lagrangian Formulations
,”
J. Mater. Process. Technol.
,
80–81
, pp.
647
–
652
.
4.
Ruminski
,
M.
,
Luksza
,
J.
,
Kusiak
,
J.
, and
Packo
,
M.
,
1998
, “
Analysis of the Effect of Die Shape on the Distribution of Mechanical Properties and Strain Field in the Tube Sinking Process
,”
J. Mater. Process. Technol.
,
80–81
, pp.
683
–
689
.
5.
Choi
,
Y.
,
Park
,
J. H.
,
Kim
,
B. M.
,
Choi
,
J. C.
, and
Min
,
B. H.
,
2000
, “
Estimation of Relation between Effective Strain and Hardness by Rigid-Plastic FEM
,”
Metals and Materials
,
6
, pp.
111
–
116
.
6.
Tekkaya
,
A. E.
,
2001
, “
Improved Relationship between Vickers Hardness and Yield Stress for Cold Formed Materials
,”
Steel Res.
,
72
, pp.
304
–
310
.
7.
Boyer, H. E., 1987, Hardness Testing, ASM International, US.
8.
Tabor
,
D.
,
1996
, “
Indentation Hardness: Fifty Years On, A Personal View
,”
Philos. Mag. A
,
74
, pp.
1207
–
1212
.
9.
Timoshenko, S. and Goodier, J. N., 1951, Theory of Elasticity, McGraw–Hill.
10.
Tabor, D., 1951, The Hardness of Metals, Clarendon Press, New York.
11.
Tabor
,
D.
,
1948
, “
A Simple Theory of Static and Dynamic Hardness
,”
Proc. R. Soc. London, Ser. A
,
192
, pp.
247
–
274
.
12.
Tirupataiah
,
Y.
, and
Sundararajan
,
G.
,
1991
, “
On the Constraint Factor Associated With the Indentation of Work-Hardening Materials With a Spherical Ball
,”
Metall. Trans. A
,
22A
, pp.
2375
–
2384
.
13.
Chaudhri
,
M. M.
,
1996
, “
Subsurface Plastic Strain Distribution Around Spherical Indentations in Metals
,”
Philos. Mag. A
,
74
, pp.
1213
–
1224
.
14.
Sinclair
,
G. B.
,
Follansbee
,
P. S.
, and
Johnson
,
K. L.
,
1985
, “
Quasi-Static Normal Indentation of an Elasto-Plastic Half Space by a Rigid Sphere-II Results
,”
Int. J. Solids Struct.
,
21
, pp.
865
–
888
.
15.
Francis
,
H. A.
,
1976
, “
Phenomenological Analysis of Plastic Spherical Indentation
,”
Trans. ASME; J. Eng. Mater. Technol.
,
98
, pp.
272
–
281
.
16.
Chen, W. F. and Han, D. J., 1988, Plasticity for Structural Engineers, Springer-Verlag, New York.
17.
Richmond
,
O.
,
Morrison
,
H. L.
, and
Devenpeck
,
M. L.
,
1974
, “
Sphere Indentation With Application to the Brinell Hardness Test
,”
Int. J. Mech. Sci.
,
16
, pp.
75
–
82
.
18.
Follansbee
,
P. S.
, and
Sinclair
,
G. B.
,
1984
, “
Quasi-Static Normal Indentation of an Elasto-Plastic Half-Space by a Rigid Sphere-I. Analysis
,”
Int. J. Solids Struct.
,
20
, pp.
81
–
91
.
19.
Edlinger
,
M. L.
,
Gratacos
,
P.
,
Montmitonnet
,
P.
, and
Felder
,
E.
,
1993
, “
Finite Element Analysis of Elastoplastic Indentation with a Deformable Indenter
,”
Eur. J. Mech. A/Solids
,
12
, pp.
679
–
698
.
20.
Guyot
,
N.
,
Kosior
,
F.
, and
Maurice
,
G.
,
2000
, “
Numerical Study of the Brinell Hardness Test of Elastoplastic Indentation
,”
Z. Angew. Math. Mech.
,
80
, pp.
555
–
563
.
21.
Hill
,
R.
,
Storakers
,
B.
, and
Zdunek
,
A. B.
,
1989
, “
A Theoretical Study of the Brinell Hardness Test
,”
Proc. R. Soc. London, Ser. A
,
423
, pp.
301
–
330
.
22.
Biwa
,
S.
, and
Storakers
,
B.
,
1995
, “
An Analysis of Fully Plastic Brinell Indentation
,”
J. Mech. Phys. Solids
,
43
, pp.
1303
–
1333
.
23.
Mesarovic
,
S.
, and
Fleck
,
N. A.
,
1999
, “
Spherical Indentation of Elastic-Plastic Solids
,”
Proc. R. Soc. London
,
455
, pp.
2707
–
2728
.
24.
Chaudri
,
M. M.
,
2000
, “
Strain Hardening around Spherical Indentations
,”
Phys. Status Solidi A
,
182
, pp.
641
–
652
.
25.
Matthews
,
J. R.
,
1980
, “
Indentation Hardness and Hot Pressing
,”
Acta Metall.
,
28
, pp.
311
–
318
.
26.
Taljat
,
B.
,
Zacharia
,
T.
, and
Kosel
,
F.
,
1998
, “
New Analytical Procedure to Determine Stress-Strain Curve from Spherical Indentation Data
,”
Int. J. Solids Struct.
,
35
, pp.
4411
–
4426
.
27.
Tirupataiah
,
Y.
, and
Sundararajan
,
G.
,
1987
, “
A Comprehensive Analysis of the Static Indentation Process
,”
Mater. Sci. Eng.
,
91
, pp.
169
–
180
.
28.
Nayebi
,
A.
,
El Abdi
,
R.
,
Bartier
,
O.
, and
Mauvoisin
,
G.
,
2002
, “
New Procedure to Determine Steel Mechanical Properties from the Spherical Indentation Technique
,”
Mech. Mater.
,
34
, pp.
243
–
254
.
29.
Carlsson
,
S.
, and
Larsson
,
P.-L.
,
2001
, “
On the Determination of Residual Stress and Strain Fields by Sharp Indentation Testing. Part II: Experimental Investigation
,”
Acta Mater.
,
49
, pp.
2193
–
2203
.
30.
Dowling, N. E., 1999, Mechanical Behavior of Materials: Engineering Methods for Deformation Fracture and Fatigue, Prentice–Hall, NJ.
31.
Oberg, E., Jones, F. D., and Horton, H. L., 1979, Machinery’s Handbook, 21st ed., Industrial Press Inc., New York.
32.
Po¨hland, K., 1989, Materials Testing for the Metal Forming Industry, Springer-Verlag, Berlin.
33.
Demir, A., 2001, “Prediction of Brinell Hardness Distribution in Cold Formed Parts,” Bogazici University, MS thesis, Istanbul.
Copyright © 2004
 by ASME
You do not currently have access to this content.