This paper deals with the spallation induced by shock wave propagation in targets during the laser shock peening process. Physical aspects concerning laser-matter interaction, shock wave propagation, and spallation are considered. A continuous kinetic model for the spallation process is included in a one-dimensional finite-difference hydrodynamic code using Lagrangian coordinates in order to calculate the laser-induced spallation phenomena. Shock wave propagation in solids is calculated and validated by experimental data. The spallation zone location is then calculated for various materials with different thickness of foils and various laser shock peening parameters. The numerical simulations are compared with previously reported experimental results and good agreement is obtained for the spallation threshold and damage zone location.
Issue Section:
Research Papers
1.
Berthe
, L.
, Fabbro
, R.
, Peyre
, P.
, Tollier
, L.
, and Bartnicki
, E.
, 1997, “Shock Waves From a Water-Confined Laser-Generated Plasma
,” J. Appl. Phys.
0021-8979, 82
(6
), pp. 2826
–2832
.2.
Wu
, B.
, and Shin
, Y. C.
, 2005, “A Self-Closed Thermal Model for Laser Shock Peening Under the Water Confinement Regime Configuration and Comparisons to Experiments
,” J. Appl. Phys.
0021-8979, 97
(11
), p. 113517
.3.
Braisted
, W.
, and Brockman
, R.
, 1999, “Finite Element Simulation of Laser Shock Peening
,” Int. J. Fatigue
0142-1123, 21
, pp. 719
–724
.5.
Gupta
, V.
, Yuan
, J.
, and Pronin
, A.
, 1994, “Recent Developments in the Laser Spallation Technique to Measure the Interface Strength and Its Relationship to Interface Toughness With Applications to Metal/Ceramic, Ceramic/Ceramic and Ceramic/Polymer Interfaces
,” J. Adhes. Sci. Technol.
0169-4243, 8
(6
), pp. 713
–747
.6.
Auroux
, E.
, Boustie
, M.
, Romain
, J. P.
, Bertheau
, D.
, Peyre
, P.
, Berthe
, L.
, and Bartnicki
, E.
, 2001, “Debonding Study of Ni-Base Substrate/Pt Coatings Interfaces Using Laser Shock Waves: Characterization of the Targets and Experimental Study
,” Surf. Coat. Technol.
0257-8972, 138
, pp. 269
–277
.7.
Cottet
, F.
, and Boustie
, M.
, 1989, “Spallation studies in Aluminum Targets Using Shock Waves Induced in Laser Irradiation at Various Pulse Durations
,” J. Appl. Phys.
0021-8979, 66
(9
), pp. 4067
–4073
.8.
Fortov
, V. E.
, and Kostin
, V. V.
, 1991, “Spallation of Metals Under Laser Irradiation
,” J. Appl. Phys.
0021-8979, 70
(8
), pp. 4524
–4531
.9.
Tollier
, L.
, Fabbro
, R.
, and Bartnicki
, E.
, 1998, “Study of the Laser-Driven Spallation Process by the Velocity Interferometer System for Any Reflector Interferometry Technique. I. Laser-Shock Characterization
,” J. Appl. Phys.
0021-8979, 83
(3
), pp. 1224
–1230
.10.
Tollier
, L.
, and Fabbro
, R.
, 1998, “Study of the Laser-Driven Spallation Process by the VISAR Interferometry Technique. II. Experimental and Simulation of the Spallation Process
,” J. Appl. Phys.
0021-8979, 83
(3
), pp. 1231
–1237
.11.
Bolis
, C.
, Berthe
, L.
, Boustie
, M.
, Arrigoni
, M.
, Barradas
, S.
, and Jeandin
, M.
, 2007, “Physical Approach to Adhesion Testing Using Laser-Driven Shock Waves
,” J. Phys. D
0022-3727, 40
, pp. 3155
–3163
.12.
Meyers
, M. A.
, 1994, Dynamic Behavior of Materials
, Wiley-Interscience
, New York
.13.
Miklowitz
, J.
, 1969, Wave Propagation in Solids
, ASME
, New York
.14.
Kanel
, G. I.
, Razorenov
, S. V.
, and Fortov
, V. E.
, 2004, Shock-Wave Phenomena and the Properties of Condensed Matter
, Springer-Verlag
, New York
.15.
Peikrishvili
, A. B.
, Japaridze
, L. A.
, Staudhammer
, K. P.
, Marquis
, F. S.
, Chikhradze
, N. M.
, Gobejishvili
, T. G.
, and Bantzuri
, E. G.
, 2000, “Explosive Compaction of Clad Graphite Powders and Obtaining of Coating on Their Base
,” Proceedings of EXPLOMET 2000, International Conference on Fundamental Issues and Applications of Shock-Wave and High-Strain-Rate Phenomena
, K. P.
Staudhammer
, L. E.
Murr
, and M. A.
Meyers
, eds., Elsevier
, Albuquerque, NM
, pp. 249
–258
.16.
Davison
, L.
, 2008, Fundamentals of Shock Wave Propagation in Solids
, Springer-Verlag
, Berlin
, Chap. 2-4.17.
Antoun
, T.
, Seaman
, L.
, Curran
, D. R.
, Kanel
, G. I.
, Razorenov
, S. V.
, and Utkin
, A. V.
, 2003, Spall Fracture
, Springer-Verlag
, New York
, Chap. 2, 6.18.
Fan
, Y.
, Wang
, Y.
, Vukelic
, S.
, and Yao
, Y. L.
, 2005, “Wave-Solid Interactions in Laser-Shock-Induced Deformation Processes
,” J. Appl. Phys.
0021-8979, 98
, p. 104904
.19.
Thoma
, K.
, Hornemann
, U.
, Sauer
, M.
, and Schneider
, E.
, 2005, “Shock Waves—Phenomenology, Experimental, and Numerical Simulation
,” Meteorit. Planet. Sci.
1086-9379, 40
, pp. 1283
–1298
.20.
Peters
, D. J.
, 1978, “HUFF, A One-Dimensional Hydrodynamics Code for Strong Shocks
,” MS thesis, Air Force Institute of Technology.21.
Mitchell
, A. C.
, and Nellis
, W. J.
, 1981, “Shock Compression of Aluminum, Copper, and Tantalum
,” J. Appl. Phys.
0021-8979, 52
(5
), pp. 3363
–3374
.Copyright © 2010
by American Society of Mechanical Engineers
You do not currently have access to this content.
