Magnetorheological elastomers (MREs) are adaptive composite materials in the sense that their mechanical properties are tailored by the applied magnetic field. In this paper we developed both isotropic and anisotropic silicone-rubber-based MREs. We examined the zero-magnetic-field dynamic stiffness and damping along with the magnetic field induced changes (the magnetorheological (MR) effect) for the viscoelastic properties of the MREs by conducting both compression and shear investigations. While the anisotropic MREs exhibited substantial magnetic-field-dependent viscoelastic properties at a medium magnetic field, the isotropic ones showed a negligible MR effect. The magnetic filler structure and concentration, loading frequency, and dynamic strain amplitude were all confirmed to play significant roles in the dynamic mechanical performance of the MREs.
Skip Nav Destination
Article navigation
April 2013
Research-Article
Viscoelastic Responses of Silicone-Rubber-Based Magnetorheological Elastomers Under Compressive and Shear Loadings
L. Z. Sun
L. Z. Sun
1
e-mail: lsun@uci.edu
Irvine, CA 92697
Department of Civil and
Environmental Engineering
,University of California
,Irvine, CA 92697
1Corresponding author.
Search for other works by this author on:
L. Z. Sun
e-mail: lsun@uci.edu
Irvine, CA 92697
Department of Civil and
Environmental Engineering
,University of California
,Irvine, CA 92697
1Corresponding author.
Contributed by the Materials Division of ASME for publication in the Journal of Engineering Materials and Technology. Manuscript received June 4, 2012; final manuscript received December 7, 2012; published online March 25, 2013. Assoc. Editor: Xi Chen.
J. Eng. Mater. Technol. Apr 2013, 135(2): 021008 (7 pages)
Published Online: March 25, 2013
Article history
Received:
June 4, 2012
Revision Received:
December 7, 2012
Citation
Li, R., and Sun, L. Z. (March 25, 2013). "Viscoelastic Responses of Silicone-Rubber-Based Magnetorheological Elastomers Under Compressive and Shear Loadings." ASME. J. Eng. Mater. Technol. April 2013; 135(2): 021008. https://doi.org/10.1115/1.4023839
Download citation file:
Get Email Alerts
Reviewer's Recognition
J. Eng. Mater. Technol (July 2025)
Forming limits of thin ferritic stainless steel for fuel cell application
J. Eng. Mater. Technol
Related Articles
Investigation of Elastomer Graphite Composite Material for Proton Exchange Membrane Fuel Cell Bipolar Plate
J. Fuel Cell Sci. Technol (August,2009)
Integer and Fractional Order-Based Viscoelastic Constitutive Modeling to Predict the Frequency and Magnetic Field-Induced Properties of Magnetorheological Elastomer
J. Vib. Acoust (August,2018)
A Simple Transversely Isotropic Hyperelastic Constitutive Model Suitable for Finite Element Analysis of Fiber Reinforced Elastomers
J. Eng. Mater. Technol (April,2011)
A New Device for Measuring the Viscoelastic Properties of Hydrated
Matrix Gels
J Biomech Eng (April,2002)
Related Proceedings Papers
Related Chapters
A Review of Recent Developments in Forced Vibration Dynamic Testing of Elastomers
Rubber and Related Products: New Methods for Testing and Analyzing
Stiffening Mechanisms
Introduction to Plastics Engineering
Supporting Systems/Foundations
Handbook on Stiffness & Damping in Mechanical Design