Figure 2 on p. 216 of the article does not have the correct dimensions for the Arcan test specimens. The discrepancy can be seen by comparing Fig. 2 to Fig. 6 in the article. The properly dimensioned drawing for Fig. 2 is shown below along with a note in the figure caption to indicate that the thickness is ≈6.3 mm.
2
Arcan specimen with location of friction stir weld. Thickness≈6.3 mm after light machining of surfaces.
2
Arcan specimen with location of friction stir weld. Thickness≈6.3 mm after light machining of surfaces.
