Skip Nav Destination
Issues
July 1999
ISSN 0094-4289
EISSN 1528-8889
In this Issue
Technical Papers
Dynamic Indentation Hardness and Rate Sensitivity in Metals
J. Eng. Mater. Technol. July 1999, 121(3): 257–263.
doi: https://doi.org/10.1115/1.2812373
Topics:
High speed machining
,
Metals
,
Vickers hardness testing
,
Yield stress
Statistical Modeling of Creep Rupture Data
J. Eng. Mater. Technol. July 1999, 121(3): 264–271.
doi: https://doi.org/10.1115/1.2812374
Topics:
Creep
,
Modeling
,
Rupture
,
Clearances (Engineering)
,
Failure
,
Reliability
Nonlinear Properties of High Strength Paperboards
J. Eng. Mater. Technol. July 1999, 121(3): 272–277.
doi: https://doi.org/10.1115/1.2812375
Topics:
Anisotropy
,
Compression
,
Deformation
,
Laminates
,
Materials properties
,
Shear (Mechanics)
,
Solid mechanics
,
Stress
Fatigue Damage Initiation in Waspaloy Under Complex Cyclic Loading
J. Eng. Mater. Technol. July 1999, 121(3): 278–285.
doi: https://doi.org/10.1115/1.2812376
Topics:
Damage
,
Fatigue damage
,
Low cycle fatigue
Multiaxial Fatigue Under Variable Amplitude Loads
J. Eng. Mater. Technol. July 1999, 121(3): 286–293.
doi: https://doi.org/10.1115/1.2812377
Topics:
Fatigue
,
Stress
,
Damage
,
Computation
,
Cycles
,
Shear (Mechanics)
,
Fatigue life
,
Torsion
,
Steel
,
Tension
Quantitative Prediction of Impact Forces In Elastomers
J. Eng. Mater. Technol. July 1999, 121(3): 294–304.
doi: https://doi.org/10.1115/1.2812378
Topics:
Elastomers
,
Deflection
,
Deformation
,
Design
,
Electronic equipment
,
Solids
,
Temperature
,
Urethane elastomers
Fatigue Life Parameter for Type 304 Stainless Steel Under Biaxial-Tensile Loading at Elevated Temperature
J. Eng. Mater. Technol. July 1999, 121(3): 305–312.
doi: https://doi.org/10.1115/1.2812379
Topics:
Fatigue life
,
Stainless steel
,
Temperature
,
Stress
,
Disks
,
Fatigue
,
Testing
,
Damage
,
Fatigue testing
,
Machinery
A Method for Determining the Elastic-Plastic Response Ahead of a Notch Tip
J. Eng. Mater. Technol. July 1999, 121(3): 313–320.
doi: https://doi.org/10.1115/1.2812380
Topics:
Deformation
,
Finite element analysis
,
Fracture (Materials)
,
Plasticity
,
Stress
,
Stress concentration
Fatigue Crack Growth Rate Characteristics of Laser Shock Peened Ti-6Al-4V
J. Eng. Mater. Technol. July 1999, 121(3): 321–329.
doi: https://doi.org/10.1115/1.2812381
Topics:
Fatigue cracks
,
Lasers
,
Shock (Mechanics)
,
Laser hardening
,
Stress
,
Compressive stress
,
Damage
,
Fracture (Materials)
,
Titanium
Numerical Modeling of Resistance Brazing Process Behavior in Joining Electrical Contact Materials
J. Eng. Mater. Technol. July 1999, 121(3): 330–335.
doi: https://doi.org/10.1115/1.2812382
Topics:
Brazing
,
Computer simulation
,
Joining
,
Transients (Dynamics)
,
Approximation
,
Convection
,
Cooling
,
Copper
,
Electrodes
,
Finite difference methods
Characterization of a Water Peening Process
J. Eng. Mater. Technol. July 1999, 121(3): 336–340.
doi: https://doi.org/10.1115/1.2812383
Topics:
Shot peening
,
Water
,
Residual stresses
,
Aluminum
,
Compressive stress
,
Deformation
,
Finite element analysis
,
Modeling
,
Stress
,
Surface roughness
Optimum Forming Loading Paths for Pb-Sn Superplastic Sheet Materials
J. Eng. Mater. Technol. July 1999, 121(3): 341–345.
doi: https://doi.org/10.1115/1.2812384
Topics:
Sheet materials
,
Superplasticity
,
Tin
,
Pressure
,
Deformation
,
Failure
,
Hardening
Residual Stresses and Surface Roughness in Turning
J. Eng. Mater. Technol. July 1999, 121(3): 346–351.
doi: https://doi.org/10.1115/1.2812385
Topics:
Residual stresses
,
Surface roughness
,
Turning
,
Fatigue
,
Cutting
,
Finishes
,
Machining
,
Steel
Strip Yield Analysis on Coalescence of Plastic Zones for Multiple Cracks in a Riveted Stiffened Sheet
J. Eng. Mater. Technol. July 1999, 121(3): 352–359.
doi: https://doi.org/10.1115/1.2812386
Topics:
Fracture (Materials)
,
Strips
,
Algebra
,
Displacement
,
Fasteners
,
Stress
,
Stress singularity
A Micromechanics-Based Finite Element Model for Compressive Failure of Notched Uniply Composite Laminates Under Remote Biaxial Loads
J. Eng. Mater. Technol. July 1999, 121(3): 360–366.
doi: https://doi.org/10.1115/1.2812387
Theoretical and Experimental Evaluation of Double-Notch Shear Strength of G-10CR Glass-Cloth/Epoxy Laminates at Cryogenic Temperatures
J. Eng. Mater. Technol. July 1999, 121(3): 367–373.
doi: https://doi.org/10.1115/1.2812388
Topics:
Epoxy adhesives
,
Epoxy resins
,
Glass
,
Laminates
,
Shear strength
,
Temperature
,
Textiles
,
Shear (Mechanics)
,
Fracture (Materials)
,
Fracture (Process)
Stress-Strain Analysis of a Taper-Taper Adhesive-Bonded Joint Under Cylindrical Bending
J. Eng. Mater. Technol. July 1999, 121(3): 374–380.
doi: https://doi.org/10.1115/1.2812389
Delamination Growth Behavior of a Fabric Reinforced Laminated Composite Under Mode I Fatigue
J. Eng. Mater. Technol. July 1999, 121(3): 381–385.
doi: https://doi.org/10.1115/1.2812390
Topics:
Composite materials
,
Delamination
,
Fatigue
,
Textiles
,
Stress
,
Tension
,
Fatigue cracks
,
Glass
,
Weight (Mass)
Computer Simulation of 3-D Random Distribution of Short Fibers in Metal Matrix Composite Materials
J. Eng. Mater. Technol. July 1999, 121(3): 386–392.
doi: https://doi.org/10.1115/1.2812391
Effect of Wrought Product Thickness and Stress Ratio on Fatigue Crack Growth Behavior of a Quaternary Aluminium-Lithium Alloy
J. Eng. Mater. Technol. July 1999, 121(3): 393–398.
doi: https://doi.org/10.1115/1.2812392
Topics:
Alloys
,
Aluminum
,
Fatigue cracks
,
Lithium
,
Stress
,
Fracture (Materials)
,
Plane strain
,
Surface roughness
Technical Brief
Estimating the Location and Depth of Normal Cracks in Cantilevers From Holographic Fringe Patterns
J. Eng. Mater. Technol. July 1999, 121(3): 399–401.
doi: https://doi.org/10.1115/1.2812393
Topics:
Cantilevers
,
Diffraction patterns
,
Fracture (Materials)
Email alerts
RSS Feeds
Modeling Growth and Viscous Flow of Oxide on Cylindrical Silicon Surfaces Including Piezoviscous Inhibition
J. Eng. Mater. Technol (April 2025)
Thermal Conductivity of 3D-Printed Metal Using Extrusion-Based Metal Additive Manufacturing Process
J. Eng. Mater. Technol (April 2025)