We describe a novel design for a compliant arm that can be mounted on a mobile robot. Because the arm is compliant, a mobile robot can manipulate or interact with objects that are not precisely positioned in the environment. The main features of the arm are the in-parallel architecture and a novel control scheme that allows us to easily control the Cartesian stiffness or impedance in the plane. Springs are added in series to the limbs of the parallel manipulator. We analyze one limb and the manipulator to determine its performance when either controlling the force applied to an object or controlling its stiffness. Further, we present experimental results that show the performance of the compliant arm.

Issue Section:
Technical Papers
Keywords:
manipulators, compliance control
Topics:
Design, Manipulators, Stiffness, Springs
1.
Whitney, D. E., 1985, “Historical Perspective and State of the Art in Robot Force Control,” Proceedings of 1985 International Conference on Robotics and Automation.
2.
Eppinger, S., and Seering, W., 1986, “On Dynamic Models of Robot Force Control,” Proceedings of the IEEE International Conference on Robotics and Automation, pp. 29–34.
3.
Colgate
,
J. E.
, and
Hogan
,
N.
,
1988
, “
Robust Control of Dynamically Interacting Systems
,”
Int. J. Control
,
48
(
1
), pp.
65
–
88
.
4.
Kazerooni
,
H.
,
Houpt
,
P. K.
, and
Sheridan
,
T. B.
,
1986
, “
Robust Compliant Motion for Manipulators, Part 2: Design Method
,”
IEEE J. Rob. Autom.
,
RA-2
(
2
), pp.
93
–
105
.
5.
Kazerooni
,
H.
,
Sheridan
,
T. B.
, and
Houpt
,
P. K.
,
1986
, “
Robust Compliant Motion for Manipulators, Part 1: The Fundamental Concepts of Compliant Motion
,”
IEEE J. Rob. Autom.
,
RA-2
(
2
), pp.
83
–
92
.
6.
Volpe, R., and Khosla, P. K., 1992, “An Experimental Evaluation and Comparison of Explicit Force Control Strategies for Robotic Manipulators,” Proceedings of 1992 International Conference on Robotics and Automation.
7.
Mason
,
M. T.
,
1981
, “
Compliance and Force Control for Computer Controlled Manipulators
,”
Transactions on Systems, Man, and Cybernetics
,
SMC-11
(
6
), pp.
418
–
432
.
8.
Paul, R., and Shimano, B., 1976, “Compliance Control,” Proceedings of the JACC.
9.
Salisbury, J. K., 1980, “Active Stiffness Control of a Manipulator in Cartesian Coordinates,” 19th IEEE Conf. on Decision and Control.
10.
Xu, Y., and Paul, R., 1988, “On Position Compensation and Force Control Stability of a Robot with a Compliant Wrist,” Proceedings of 1988 International Conference on Robotics and Automation.
11.
Sugano, S., Tsuto, S., and Kato, I., 1992, “Force Control of the Robot Finger Joint Equipped with Mechanical Compliance Adjuster,” Proceedings of the 1992 IEEE/RSJ International Conference on Intelligent Robots and Systems, Raleigh, NC.
12.
Tasch, A. D. U., 1996, “A Two-DOF Manipulator with Adjustable Compliance Capabilities and Comparison with the Human Finger,” J. Rob. Syst., 13(1).
13.
Pratt, G., and Williamson, M., 1995, “Series Elastic Actuators,” Proceedings of the 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems.
14.
Morrell, J., and Salisbury, J., 1995, “Parallel Coupled Actuators for High Performance Force Control: A Micro-Macro Concept,” Proceedings of the 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems.
15.
Pfreundschuh
,
G.
,
Sugar
,
T.
, and
Kumar
,
V.
,
1994
, “
Design and Control of a Three-Degrees-of-Freedom, In-Parallel, Actuated Manipulator
,”
J. Rob. Syst.
,
11
(
2
), pp.
103
–
115
16.
Kolacinski, R., and Quinn, R., 1998, “Design and Mechanics of an Antagonistic Biomimetic Actuator System,” Proceedings of 1998 International Conference on Robotics and Automation, Belgium.
17.
Howell, L., Midha, A., and Murphy, M. D., 1994, “Dimensional Synthesis of Compliant Constant-Force Slider Mechanisms,” Machine Elements and Machine Dynamics, 23rd Biennial ASME Mechanisms Conference, DE-71, Minneapolis.
18.
Padmanabhan
,
B.
,
Arun
,
V.
, and
Reinholtz
,
C.
,
1992
, “
Closed-Form Inverse Kinematic Analysis of Variable-Geometry Truss Manipulators
,”
ASME J. Mech. Des.
,
114
(
3
),
438
–
443
.
19.
Lee, J., Duffy, J., and Keler, M., 1996, “The Optimum Quality Index for the Stability of In-Parallel Planar Platform Devices,” Proceedings of the 1996 ASME Design Engineering Technical Conferences and Computers in Engineering Conference, Irvine, California.
20.
Asada, H., and Slotine, J.-J. E., 1986, Robot Analysis and Control, John Wiley and Sons.
Copyright © 2002
 by ASME
You do not currently have access to this content.