This paper studies the design of a spring-actuated mechanism of 69KV SF6 Gas insulated circuit breakers. The creative mechanism design method is first used to synthesize all the feasible mechanisms that satisfy the requirements for the circuit breaker. The kinematics of the mechanism are then analyzed using the vector-loop method. Subsequently, the equations of motion are derived with the Lagrange equation and solved by the Runge-Kutta method. The duration of individual operation, and hence the total duration to complete the full cycle of the mechanism has also been calculated. The times taken for the closing and opening operations were found to be 0.116 and 0.076 sec, respectively, comparable with the experiments.
Issue Section:
Technical Briefs
1.
Erdman, A. G., Nelson, E., Peterson, J., and Bowen, J., 1980, “Type and Dimensional Synthesis of Casement Window Mechanisms,” ASME Paper No. 80-DET-78.
2.
Freudenstein
, F.
, and Maki
, E. R.
, 1979
, “The Creation of Mechanisms According to Kinematic Structure and Function
,” J. of Environmental and Planning B
, 6
, pp. 357
–391
.3.
Freudenstein
, F.
, and Maki
, E. R.
, 1983
, “Development of an Optimum Variable-Stroke Internal-Combustion Engine Mechanism from the Viewpoint of Kinematic Structure
,” ASME J. Mech., Transm., Autom. Des.
, 105
, pp. 259
–266
.4.
Yan
, H. S.
, 1992
, “A Methodology for Creative Mechanism Design
,” Mech. Mach. Theory
, 27
(3
), pp. 235
–242
.5.
Chen
, F. C.
, and Yan
, H. S.
, 1999
, “On the Configuration Synthesis of Machining Centers With Tool Change Mechanisms
,” Int. J. Mach. Tools Manuf.
, 39
(2
), pp. 273
–295
.6.
Chen
, F. C.
, and Yan
, H. S.
, 1999
, “A Design Methodology for the Configuration Synthesis of Machining Centers With Automatic Tool Changer
,” ASME J. Mech. Des.
, 121
(3
), pp. 359
–367
.7.
Tsai
, L. W.
, and Lin
, C. C.
, 1989
, “The Creation of Nonfractionated Two-Degree-Freedom Epicyclic Gear Trains
,” ASME J. Mech., Transm., Autom. Des.
, 111
(4
), pp. 524
–529
.8.
Root
, R. R.
, and Ragsdell
, K. M.
, 1983
, “Circuit Breaker-A Practical Example in Engineering Optimization
,” Mech. Mach. Theory
, 18
(3
), pp. 229
–235
.9.
Jobes
, C. C.
, Palmer
, G. M.
, and Means
, K. H.
, 1990
, “Synthesis of a Controllable Circuit Breaker Mechanism
,” ASME J. Mech. Des.
, 112
(3
), pp. 324
–330
.10.
Greenwood, D. T., 1988, Principles of Dynamics, Prentice-Hall, Inc., Englewood Cliffs, New Jersey.
11.
Chen
, F. C.
, and Hsu
, M. H.
, 2001
, “On the Transmission Efficiency of Spring-Type Operating Mechanism for SF6 Gas Insulated Circuit Breakers
,” J. Mech. Eng. Sci.
, 215
(10
), pp. 1239
–1249
.Copyright © 2003
by ASME
You do not currently have access to this content.