This paper demonstrates a novel quadstable monolithic mechanism (QsMM), which provides four stable equilibrium positions within its planar operation range. The QsMM has been realized from the use of both - and -directional bistable structures, which utilize curved snapping beams. Two pairs of curved beams were attached to an inner frame in both and directions to present an independent bistable behavior in the directions. It was found out that the design of the inner frame is crucial for the quadstability and dynamic responses of the mechanism. A millimeter-scale brass mechanism was actually fabricated by ultraprecision milling to test the quadstability and the force-displacement behavior. The prototype clearly demonstrates four distinct stable positions in its millimeter-scale operation range. The design concept, finite element simulation, fabrication, and experimental measurement of the proposed multistable mechanism have been presented. The mechanical multistability of the proposed QsMM can be utilized for multiple switching and optical networking applications, yielding low power consumption operations.
Skip Nav Destination
e-mail: jshan@andong.ac.kr
e-mail: clmuelle@imtek.de
e-mail: wallrabe@imtek.de
e-mail: korvink@imtek.de
Article navigation
November 2007
Technical Briefs
Design, Simulation, and Fabrication of a Quadstable Monolithic Mechanism With - and -Directional Bistable Curved Beams
Jeong Sam Han,
Jeong Sam Han
School of Mechanical Engineering,
e-mail: jshan@andong.ac.kr
Andong National University
, 388 Songchon-dong, 760-749 Andong, Korea
Search for other works by this author on:
Claas Müller,
Claas Müller
Institute for Microsystem Technology (IMTEK),
e-mail: clmuelle@imtek.de
University of Freiburg
, Georges-Köhler-Allee 103, D-79110 Freiburg, Germany
Search for other works by this author on:
Ulrike Wallrabe,
Ulrike Wallrabe
Institute for Microsystem Technology (IMTEK),
e-mail: wallrabe@imtek.de
University of Freiburg
, Georges-Köhler-Allee 103, D-79110 Freiburg, Germany
Search for other works by this author on:
Jan G. Korvink
Jan G. Korvink
Institute for Microsystem Technology (IMTEK),
e-mail: korvink@imtek.de
University of Freiburg
, Georges-Köhler-Allee 103, D-79110 Freiburg, Germany
Search for other works by this author on:
Jeong Sam Han
School of Mechanical Engineering,
Andong National University
, 388 Songchon-dong, 760-749 Andong, Koreae-mail: jshan@andong.ac.kr
Claas Müller
Institute for Microsystem Technology (IMTEK),
University of Freiburg
, Georges-Köhler-Allee 103, D-79110 Freiburg, Germanye-mail: clmuelle@imtek.de
Ulrike Wallrabe
Institute for Microsystem Technology (IMTEK),
University of Freiburg
, Georges-Köhler-Allee 103, D-79110 Freiburg, Germanye-mail: wallrabe@imtek.de
Jan G. Korvink
Institute for Microsystem Technology (IMTEK),
University of Freiburg
, Georges-Köhler-Allee 103, D-79110 Freiburg, Germanye-mail: korvink@imtek.de
J. Mech. Des. Nov 2007, 129(11): 1198-1203 (6 pages)
Published Online: November 20, 2006
Article history
Received:
March 16, 2006
Revised:
November 20, 2006
Citation
Han, J. S., Müller, C., Wallrabe, U., and Korvink, J. G. (November 20, 2006). "Design, Simulation, and Fabrication of a Quadstable Monolithic Mechanism With - and -Directional Bistable Curved Beams." ASME. J. Mech. Des. November 2007; 129(11): 1198–1203. https://doi.org/10.1115/1.2771577
Download citation file:
Get Email Alerts
Multi-Split Configuration Design for Fluid-Based Thermal Management Systems
J. Mech. Des (February 2025)
Related Articles
Dynamics Modeling and Analysis of Thin-Walled Aerospace Structures for Fixture Design in Multiaxis Milling
J. Manuf. Sci. Eng (June,2008)
A New Analytical Formulation for the Dynamics of Multipocket Thin-Walled Structures Considering the Fixture Constraints
J. Manuf. Sci. Eng (April,2011)
Development of a New Model for the Varying Dynamics of Flexible Pocket-Structures During Machining
J. Manuf. Sci. Eng (August,2011)
Shape Optimization of Flexible Robotic Manipulators
J. Mech. Des (May,2006)
Related Proceedings Papers
Related Chapters
The Nuclear and Related Industry
Decommissioning Handbook
Digital Human in Engineering and Bioengineering Applications
Advances in Computers and Information in Engineering Research, Volume 1
Data Tabulations
Structural Shear Joints: Analyses, Properties and Design for Repeat Loading