Tensegrity structures have remarkable configurations and are drawing the attention of architects and engineers. They possess inextensional mechanisms and self-stress states at a static equilibrium configuration under no external loads. For geometry with its nodes fixed, different connectivity patterns of the compression bars and tension cables might bring some novel tensegrity structures. Thus, form-finding is the key to designing novel tensegrity structures. Here, we develop a discrete optimization model for the form-finding and convert it into a modified traveling salesman problem (TSP). The ant colony system (ACS) is used to search for feasible solutions, where all the predetermined nodes are taken as different cities in the network. An objective function that considers the stability and the relative stiffness is developed to obtain the optimized configurations of tensegrity structures. Examples based on some regular geometries (including a hexagon and two polyhedra) and two nonregular geometries are carried out using the proposed technique. Many different configurations of the pin-jointed assemblies are transformed into interesting tensegrity structures. To verify the proposed method, some physical models are constructed and compared to the tensegrity structures obtained from the form-finding process. We conclude that this novel algorithm can be applicable to the form-finding of both regular and nonregular tensegrity structures.
Issue Section:
Research Papers
References
1.
Fuller
, R. B.
, 1962, “Tensile-Integrity Structures
,” U.S. Patent No. 3,063,521.2.
Pugh
, A.
, 1976, An Introduction to Tensegrity
, University of California Press
, Berkeley
.3.
Motro
, R.
, 2003, Tensegrity: Structural Systems for the Future
, Kogan Page Science
, London
.4.
Zhang
, J. Y.
, Ohsaki
, M.
, and Kanno
, Y.
, 2006, “A Direct Approach to Design of Geometry and Forces of Tensegrity Systems
,” Int. J. Solids Struct.
, 43
(7–8
), pp. 2260
–2278
.5.
Pandia Raj
, P.
, and Guest
, S. D.
, 2006, “Using Symmetry for Tensegrity Form-Finding
,” J. Int. Assoc. Shell Spatial Struct.: IASS
, 47
(3
), pp. 245
–252
.6.
Yuan
, X. F.
, and Dong
, S. L.
, 2003, “Integral Feasible Prestress of Cable Domes
,” Comput. Struct.
, 81
(21
), pp. 2111
–2119
.7.
Zhang
, J. Y.
, and Ohsaki
, M.
, 2007, “Stability Conditions for Tensegrity Structures
,” Int. J. Solids Struct.
, 44
(11–12
), pp. 3875
–3886
.8.
Zhang
, J. Y.
, Guest
, S. D.
, and Ohsaki
, M.
, 2009, “Symmetric Prismatic Tensegrity Structures: Part I. Configuration and Stability
,” Int. J. Solids Struct.
, 46
(1
), pp. 1
–14
.9.
Skelton
, R. E.
, and Oliveira
, M. C.
, 2009, Tensegrity Systems
, Springer
, New York
, ISBN: 978-0-387-74241-0.10.
Tibert
, A. G.
, and Pellegrino
, S.
, 2003, “Review of Form-Finding Methods for Tensegrity Structures
,” Int. J. Space Struct.
, 18
(4
), pp. 209
–223
.11.
Juan
, S. H.
, and Mirats Tur
, J. M.
, 2008, “Tensegrity Frameworks: Static Analysis Review
,” Mech. Mach. Theory
, 43
(7
), pp. 859
–881
.12.
Sultan
, C.
, 2009, “Tensegrity: Sixty Years of Art, Science, and Engineering
,” Adv. Appl. Mech.
, 43
, pp. 69
–145
.13.
Barnes
, M. R.
, 1999, “Form Finding and Analysis of Tension Structures by Dynamic Relaxation
,” Int. J. Space Struct.
, 14
(2
), pp. 89
–104
.14.
Fest
, E.
, Shea
, K.
, Domer
, B.
, and Smith
, F. C.
, 2003, “Adjustable Tensegrity Structures
,” J. Struct. Eng.
, 129
(4
), pp. 515
–526
.15.
Zhang
, J. Y.
, and Ohsaki
, M.
, 2006, “Adaptive Force Density Method for Form-Finding Problem of Tensegrity Structures
,” Int. J. Solids Struct.
, 43
(18–19
), pp. 5658
–5673
.16.
Estrada
, G. G.
, Bungartz
, H. J.
, and Mohrdieck
, C.
, 2006, “Numerical Form-Finding of Tensegrity Structures
,” Int. J. Solids Struct.
, 43
(22–23
), pp. 6855
–6868
.17.
Tran
, H. C.
, and Lee
, J.
, 2011, “Form-Finding of Tensegrity Structures With Multiple States of Self-Stress
,” Acta Mech.
, 222
(1–2
), pp. 131
–147
.18.
Zhang
, L.
, Maurin
, B.
, and Motro
, R.
, 2006, “Form-Finding of Nonregular Tensegrity Systems
,” J. Struct. Eng.
, 132
(9
), pp. 1435
–1440
.19.
Ali
, N. B. H.
, Rhode-Barbarigos
, L.
, and Smith
, I. F. C.
, 2011, “Analysis of Clustered Tensegrity Structures Using a Modified Dynamic Relaxation Algorithm
,” Int. J. Solids Struct.
, 48
(5
), pp. 637
–647
.20.
Masic
, M.
, Skelton
, R. E.
, and Gill
, P. E.
, 2005, “Algebraic Tensegrity Form-Finding
,” Int. J. Solids Struct.
, 42
(16–17
), pp. 4833
–4858
.21.
Rieffel
, J.
, Cuevas
, F. J. V.
, and Lipson
, H.
, 2009, “Automated Discovery and Optimization of Large Irregular Tensegrity Structures
,” Comput. Struct.
, 87
(5–6
), pp. 368
–379
.22.
Pandia
Raj
, R.
, and Guest
, S. D.
, 2008, “A Tensegrity Catalogue Using Point Group Theory
,” 6th International Conference on Computation of Shell and Spatial Structures
, IASS-IACM 2008
, Ithaca, NY, May 28–31.23.
Sultan
, C.
, Corless
, M.
, and Skelton
, R. E.
, 2001, “The Prestressability Problem of Tensegrity Structures: Some Analytical Solutions
,” Int. J. Solids Struct.
, 38
, pp. 5223
–5252
.24.
Connelly
, R.
, and Back
, A.
, 1998, “Mathematics and Tensegrity
,” Am. Sci.
, 86
, pp. 142
–151
.25.
Domer
, B.
, and Smith
, I. F. C.
, 2005, “An Active Structure that Learns
,” J. Comput. Civ. Eng.
, 19
(1
), pp. 16
–24
.26.
Paul
, C.
, Lipson
, H.
, and Cuevas
, F. J. V.
, 2005, “Design and Control of Tensegrity Robots for Locomotion
,” IEEE Trans. Rob.
, 22
(5
), pp. 944
–957
.27.
Paul
, C.
, Lipson
, H.
, and Cuevas
, F. J. V.
, 2005, “Evolutionary Form-Finding of Tensegrity Structures
,” Proceedings of the 2005 Genetic and Evolutionary Computation Conference
, Washington, DC, pp. 3
–10
.28.
Xu
, X.
, and Luo
, Y. Z.
, 2010, “Form-Finding of Nonregular Tensegrities Using a Genetic Algorithm
,” Mech. Res. Commun.
, 37
(1
), pp. 85
–91
.29.
Yamamoto
, M.
, Gan
, B. S.
, Fujita
, K.
, and Kurokawa
, J.
, 2011, “A Genetic Algorithm Based Form-Finding for Tensegrity Structure
,” Procedia Eng.
, 14
, pp. 2949
–2956
.30.
Koohestani
, K.
, 2012, “Form-Finding of Tensegrity Structures via Genetic Algorithm
,” Int. J. Solids Struct.
, 49
(5
), pp. 739
–747
.31.
Pellegrino
, S.
, and Calladine
, C. R.
, 1986, “Matrix Analysis of Statically and Kinematically Indeterminate Frameworks
,” Int. J. Solids Struct.
, 22
(4
), pp. 409
–428
.32.
Azadi
, M.
, Behzadipour
, S.
, and Faulkner
, G.
, 2010, “Variable Stiffness Spring Using Tensegrity Prisms
,” ASME J. Mech. Rob.
, 2
(11
), p. 04
.1001
33.
Guest
, S. D.
, 2011, “The Stiffness of Tensegrity Structures
,” IMA J. Appl. Math.
, 76
(1
), pp. 57
–66
.34.
Ohsaki
, M.
, and Zhang
, J.
, 2006, “Stability Conditions of Prestressed Pin-Jointed Structures
,” Int. J. Non-Linear Mech.
, 41
(10
), pp. 1109
–1117
.35.
Arsenault
, M.
, 2011, “Stiffness Analysis of a 2DOF Planar Tensegrity Mechanism
,” ASME J. Mech. Rob.
, 3
(5
), p. 021011
.36.
Chen
, Y.
, Feng
, J.
, and Wu
, Y.
, 2012, “Prestress Stability of Pin-Jointed Assemblies Using Ant Colony Systems
,” Mech. Res. Commun.
, 41
, pp. 30
–36
.37.
Dorigo
, M.
, and Gambardella
, L. M.
, 1997, “Ant Colony System: A Cooperative Learning Approach to the Traveling Salesman Problem
,” IEEE Trans. Evol. Comput.
, 1
(1
), pp. 53
–66
.38.
Dorigo
, M.
, Birattari
, M.
, and Stützle
, T.
, 2006, “Ant Colony Optimization: Artificial Ants as a Computational Intelligence Technique
,” IEEE Comput. Intell. Mag.
, 1
(4
), pp. 28
–39
.39.
Kaveh
, A.
, and Shojaee
, S.
, 2007, “Optimal Design of Skeletal Structures Using Ant Colony Optimization
,” Int. J. Numer. Methods Eng.
, 70
(5
), pp. 563
–581
.40.
Kaveh
, A.
, and Jahanshahi
, M.
, 2008, “Plastic Limit Analysis of Frames Using Ant Colony Systems
,” Comput. Struct.
, 86
(11–12
), pp. 1152
–1163
.41.
Camp
, C. V.
, and Bichon
, B. J.
, 2004, “Design of Space Trusses Using Ant Colony Optimization
,” J. Struct. Eng.
, 130
(5
), pp. 741
–751
.42.
Kaveh
, A.
, and Talatahari
, S.
, 2010, “An Improved Ant Colony Optimization for the Design of Planar Steel Frames
,” Eng. Struct.
, 32
(3
), pp. 864
–873
.43.
Calladine
, C. R.
, 1978, “Buckminster Fuller’s ‘Tensegrity’ Structures and Clerk Maxwell’s Rules for the Construction of Stiff Frames
,” Int. J. Solids Struct.
, 14
(2
), pp. 161
–172
.Copyright © 2012
by American Society of Mechanical Engineers
You do not currently have access to this content.
