Opto-thermophoretic manipulation is an emerging field, which exploits the thermophoretic migration of particles and colloidal species under a light-controlled temperature gradient field. The entropically favorable photon–phonon conversion and widely applicable heat-directed migration make it promising for low-power manipulation of variable particles in different fluidic environments. By exploiting an optothermal substrate, versatile opto-thermophoretic manipulation of colloidal particles and biological objects can be achieved via optical heating. In this paper, we summarize the working principles, concepts, and applications of the recently developed opto-thermophoretic techniques. Opto-thermophoretic trapping, tweezing, assembly, and printing of colloidal particles and biological objects are discussed thoroughly. With their low-power operation, simple optics, and diverse functionalities, opto-thermophoretic manipulation techniques will offer great opportunities in materials science, nanomanufacturing, life sciences, colloidal science, and nanomedicine.
Skip Nav Destination
Article navigation
December 2018
This article was originally published in
Journal of Micro and Nano-Manufacturing
Review Articles
Opto-Thermophoretic Tweezers and Assembly
Jingang Li,
Jingang Li
Materials Science and Engineering Program
and Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78712
and Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78712
Search for other works by this author on:
Linhan Lin,
Linhan Lin
Materials Science and Engineering Program and
Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78712
Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78712
Search for other works by this author on:
Yuji Inoue,
Yuji Inoue
Materials Science and Engineering Program and
Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78712
Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78712
Search for other works by this author on:
Yuebing Zheng
Yuebing Zheng
Materials Science and Engineering Program and
Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78712
e-mail: zheng@austin.utexas.edu
Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78712
e-mail: zheng@austin.utexas.edu
Search for other works by this author on:
Jingang Li
Materials Science and Engineering Program
and Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78712
and Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78712
Linhan Lin
Materials Science and Engineering Program and
Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78712
Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78712
Yuji Inoue
Materials Science and Engineering Program and
Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78712
Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78712
Yuebing Zheng
Materials Science and Engineering Program and
Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78712
e-mail: zheng@austin.utexas.edu
Department of Mechanical Engineering,
The University of Texas at Austin,
Austin, TX 78712
e-mail: zheng@austin.utexas.edu
1Corresponding author.
Contributed by the Manufacturing Engineering Division of ASME for publication in the JOURNAL OF MICRO-AND NANO-MANUFACTURING. Manuscript received August 13, 2018; final manuscript received September 16, 2018; published online October 18, 2018. Editor: Nicholas Fang.
J. Micro Nano-Manuf. Dec 2018, 6(4): 040801 (10 pages)
Published Online: October 18, 2018
Article history
Received:
August 13, 2018
Revised:
September 16, 2018
Citation
Li, J., Lin, L., Inoue, Y., and Zheng, Y. (October 18, 2018). "Opto-Thermophoretic Tweezers and Assembly." ASME. J. Micro Nano-Manuf. December 2018; 6(4): 040801. https://doi.org/10.1115/1.4041615
Download citation file:
Get Email Alerts
Reviewer's Recognition
J. Micro Nano Sci. Eng (June 2025)
Reviewer's Recognition
J. Micro Nano Sci. Eng (June 2025)
Fabrication and Characterization of Metallic Glass Nanowire-Anchored Microfluidic Channels
J. Micro Nano Sci. Eng (June 2025)
Design of Experiments Informed Investigation of Magnetic Field-Assisted Nickel Electroplating on Copper
J. Micro Nano Sci. Eng (June 2025)
Related Articles
Damage-Free Low Temperature Pulsed Laser Printing of Gold Nanoinks On Polymers
J. Heat Transfer (July,2005)
On the Analysis of Short-Pulse Laser Heating of Metals Using the Dual Phase Lag Heat Conduction Model
J. Heat Transfer (November,2009)
Three-Dimensional Temperature Gradient Mechanism in Selective Laser Melting of Ti-6Al-4V
J. Manuf. Sci. Eng (December,2014)
Measurement of the Transient Glass Surface Deformation During Laser Heating
J. Heat Transfer (November,1999)
Related Proceedings Papers
Related Chapters
Hot Melt Ink Printing with Focus on Customized Protective Layers for Metal and Silicon Structuring and Sacrificial Molds for Die Fabrication
International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)
A Laser Heating Device for Metallographic Studies
Advances in Electron Metallography: Vol. 6
Research Protocol for Approval of Drift-Reducing Adjuvants for Dicamba in Brazil
Pesticide Formulation and Delivery Systems: 42nd Volume, Building the Future of Agrochemicals for 2030 and Beyond