Skip Nav Destination
Issues
December 2015
This article was originally published in
Journal of Micro and Nano-Manufacturing
ISSN 2166-0468
EISSN 2166-0476
In this Issue
Research Papers
Microthreading in Whirling
J. Micro Nano-Manuf. December 2015, 3(4): 041001.
doi: https://doi.org/10.1115/1.4030704
Topics:
Cutting
,
Whirls
,
Wire
,
Machine tools
Graphene Oxide Colloidal Suspensions as Cutting Fluids for Micromachining—Part I: Fabrication and Performance Evaluation
J. Micro Nano-Manuf. December 2015, 3(4): 041002.
doi: https://doi.org/10.1115/1.4031135
Topics:
Cutting
,
Fluids
,
Graphene
,
Manufacturing
,
Micromachining
,
Temperature
,
Platelets
,
Performance evaluation
,
Surface roughness
Graphene Oxide Colloidal Suspensions as Cutting Fluids for Micromachining—Part II: Droplet Dynamics and Film Formation
J. Micro Nano-Manuf. December 2015, 3(4): 041003.
doi: https://doi.org/10.1115/1.4031136
Topics:
Cutting
,
Drops
,
Evaporation
,
Fluids
,
Graphene
,
Micromachining
,
Temperature
,
Temperature profiles
Design of a Compact Biaxial Tensile Stage for Fabrication and Tuning of Complex Micro- and Nano-scale Wrinkle Patterns
J. Micro Nano-Manuf. December 2015, 3(4): 041004.
doi: https://doi.org/10.1115/1.4031382
Feasibility of Fiber-Deposition Control by Secondary Electric Fields in Near-Field Electrospinning
J. Micro Nano-Manuf. December 2015, 3(4): 041005.
doi: https://doi.org/10.1115/1.4031491
Topics:
Electric fields
,
Electrodes
,
Electrospinning
,
Fibers
,
Resolution (Optics)
Three-Dimensional Printing of Nanoscale Powders Using Laser Shockwaves
J. Micro Nano-Manuf. December 2015, 3(4): 041006.
doi: https://doi.org/10.1115/1.4031462
Topics:
Lasers
,
Shock waves
,
Sintering
,
Diamonds
,
Shock (Mechanics)
,
Additive manufacturing
,
Nanoscale phenomena
,
Particulate matter
Finite Element-Based Brownian Dynamics Simulation of Nanofiber Suspensions Using Monte Carlo Method
J. Micro Nano-Manuf. December 2015, 3(4): 041007.
doi: https://doi.org/10.1115/1.4031492
Topics:
Fibers
,
Simulation
,
Fluids
,
Brownian motion
Atomized Dielectric Spray-Based Electric Discharge Machining for Sustainable Manufacturing
J. Micro Nano-Manuf. December 2015, 3(4): 041008.
doi: https://doi.org/10.1115/1.4031666
Topics:
Electrical discharge machining
,
Sprays
,
Thin films
,
Electrodes
Email alerts
RSS Feeds
Investigation of Virtual Impactor Design Parameters in Aerosol Jet Printing Using Computational Fluid Dynamics
J. Micro Nano Sci. Eng (September 2025)
Digital Microfluidics Automation of Oligonucleotide Assemblies
J. Micro Nano Sci. Eng (June 2025)
An Experimental Study on Material Removal Mechanisms in Quasi-Continuous Wave Fiber Laser Microdrilling of SS 304
J. Micro Nano Sci. Eng (June 2025)
