The design of wind turbines requires information about joint data for wind and wave conditions. Moreover, combining offshore wind and wave energy facilities is a potential way to reduce the cost of offshore wind farms. To design combined offshore renewable energy concepts, it is important to choose sites where both wind and wave energy resources are substantial. This paper deals with joint environmental data for five European offshore sites which serve as basis for the analysis and comparison of combined renewable energy concepts developed in the EU FP7 project—MARINA Platform. The five sites cover both shallow and deep water, with three sites facing the Atlantic Ocean and two sites in the North Sea. The long-term joint distributions of wind and wave parameters are presented for these sites. Simultaneous hourly mean wind and wave hindcast data from 2001 to 2010 are used as a database. The joint distributions are modeled by fitting analytical distributions to the hindcast data. The long-term joint distributions can be used to estimate the wind and wave power output from each combined concept and to estimate the fatigue lifetime of the structure. The marginal distributions of wind and wave parameters are also provided. Based on the joint distributions, contour surfaces are established for combined wind and wave parameters for which the probability of exceedance corresponds to a return period of 50 years. The design points on the 50-year contour surfaces are suggested for extreme response analysis of combined concepts.
Skip Nav Destination
Article navigation
June 2015
Research-Article
Joint Distribution of Environmental Condition at Five European Offshore Sites for Design of Combined Wind and Wave Energy Devices
Lin Li,
Lin Li
1
Centre for Ships and Ocean Structures (CeSOS),
e-mail: lin.li@ntnu.no
University of Science and Technology (NTNU)
,Trondheim NO-7491
, Norway
e-mail: lin.li@ntnu.no
1Corresponding author.
Search for other works by this author on:
Zhen Gao,
Zhen Gao
Centre for Ships and Ocean Structures (CeSOS),
Centre for Autonomous Marine Operations and
Systems (AMOS),
Norwegian University of Science and
Technology (NTNU),
Centre for Autonomous Marine Operations and
Systems (AMOS),
Department of Marine Technology
,Norwegian University of Science and
Technology (NTNU),
Trondheim NO-7491
, Norway
Search for other works by this author on:
Torgeir Moan
Torgeir Moan
Centre for Ships and Ocean Structures (CeSOS),
Centre for Autonomous Marine Operations and Systems (AMOS),
Department of Marine Technology,
Technology (NTNU),
Centre for Autonomous Marine Operations and Systems (AMOS),
Department of Marine Technology,
Norwegian University of Science and
Technology (NTNU),
Trondheim NO-7491
, Norway
Search for other works by this author on:
Lin Li
Centre for Ships and Ocean Structures (CeSOS),
e-mail: lin.li@ntnu.no
University of Science and Technology (NTNU)
,Trondheim NO-7491
, Norway
e-mail: lin.li@ntnu.no
Zhen Gao
Centre for Ships and Ocean Structures (CeSOS),
Centre for Autonomous Marine Operations and
Systems (AMOS),
Norwegian University of Science and
Technology (NTNU),
Centre for Autonomous Marine Operations and
Systems (AMOS),
Department of Marine Technology
,Norwegian University of Science and
Technology (NTNU),
Trondheim NO-7491
, Norway
Torgeir Moan
Centre for Ships and Ocean Structures (CeSOS),
Centre for Autonomous Marine Operations and Systems (AMOS),
Department of Marine Technology,
Technology (NTNU),
Centre for Autonomous Marine Operations and Systems (AMOS),
Department of Marine Technology,
Norwegian University of Science and
Technology (NTNU),
Trondheim NO-7491
, Norway
1Corresponding author.
Contributed by the Ocean, Offshore, and Arctic Engineering Division of ASME for publication in the JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING. Manuscript received August 8, 2014; final manuscript received February 11, 2015; published online March 18, 2015. Assoc. Editor: António Falcão.
J. Offshore Mech. Arct. Eng. Jun 2015, 137(3): 031901 (16 pages)
Published Online: June 1, 2015
Article history
Received:
August 8, 2014
Revision Received:
February 11, 2015
Online:
March 18, 2015
Citation
Li, L., Gao, Z., and Moan, T. (June 1, 2015). "Joint Distribution of Environmental Condition at Five European Offshore Sites for Design of Combined Wind and Wave Energy Devices." ASME. J. Offshore Mech. Arct. Eng. June 2015; 137(3): 031901. https://doi.org/10.1115/1.4029842
Download citation file:
Get Email Alerts
The Autonomous Urban Passenger Ferry milliAmpere2: Design and Testing
J. Offshore Mech. Arct. Eng (June 2025)
Study of evolving young wind waves under steady wind forcing
J. Offshore Mech. Arct. Eng
Research on Fatigue Crack Growth Life of Offshore Wind Turbine Towers With Double Cracks in Extreme Environments
J. Offshore Mech. Arct. Eng (October 2025)
Study of Temperature Field in Helical Carcass Supported Flexible Cryogenic Pipes for LNG
J. Offshore Mech. Arct. Eng
Related Articles
Model Test of a 1:8-Scale Floating Wind Turbine Offshore in the Gulf of Maine
J. Offshore Mech. Arct. Eng (August,2015)
Profiles of Two JOMAE Associate Editors (A Continuing Series)
J. Offshore Mech. Arct. Eng (October,2021)
Impact of Climate Change on Design of Offshore Wind Turbine Considering Dynamic Soil–Structure Interaction
J. Offshore Mech. Arct. Eng (December,2017)
Alternative Environmental Contours for Marine Structural Design—A Comparison Study
J. Offshore Mech. Arct. Eng (October,2015)
Related Proceedings Papers
Related Chapters
Cooling a Radar’s Electronic Board
Electromagnetic Waves and Heat Transfer: Sensitivites to Governing Variables in Everyday Life
Hydro Power Africa
Hydro, Wave and Tidal Energy Applications
A Generalized Framework for Digital Technologies for Fixed Foundation Offshore Wind Applications
Asset Integrity Management of Critical Infrastructure