Abstract
In this paper, a new model is proposed for system degradation evaluation under sliding wear failure mechanism. This model estimates the material loss with respect to progression of sliding distance. This model is generated by considering physical and geometrical aspects of the system which is under wear failure mechanism. Several sets of experimental data are used for validation of the presented model. These experimental data are related to the pin-on-disk test including initially conformal and nonconformal contacts. A dataset of the pin-on-disk test by ASTM-G99 standard is used for additional model validation. The rail system data are employed for validation of the model in the practical systems. Uncertainty is analyzed by Monte Carlo simulation to determine the variations of the predicted material loss. Finally, the reliability assessment of these systems is performed.
Issue Section:
Research Papers
References
1.
Straffelini
,
G.
, 2015
, Friction and Wear: Methodologies for Design and Control
,
Springer
, Cham, Switzerland.2.
Modarres
,
M.
,
Amiri
,
M.
, and
Jackson
,
C.
, 2017
, Probabilistic Physics of Failure Approach to Reliability: Modeling, Accelerated Testing, Prognosis and Reliability Assessment
,
Wiley
, College Park, MD.3.
Burwell
,
J.
, and
Strang
,
C.
, 1952
, “
Metallic Wear
,” Proc. R. Soc. London A
,
212
(1111
), pp. 470
–477
.10.1098/rspa.1952.02394.
Holm
,
R.
, and
Chapter
,
X.
, 1950
, Mechanical Wear
,
American Society for Metals
, Cleveland, OH.5.
Archard
,
J.
, 1953
, “
Contact and Rubbing of Flat Surfaces
,” J. Appl. Phys.
,
24
(8
), pp. 981
–988
.10.1063/1.17214486.
Meng
,
H. C.
, and
Ludema
,
K. C.
, 1995
, “
Wear Models and Predictive Equations: Their Form and Content
,” Wear
,
181–183
, pp. 443
–457
.10.1016/0043-1648(95)90158-27.
Barwell
,
F.
, 1958
, “
Report on Papers on Wear Presented at the Institution of Mechanical Engineers Conference
,” Wear
,
1
(5
), pp. 418
–445
.10.1016/0043-1648(58)90114-58.
Srivastava
,
A.
,
Ram
,
K. S.
, and
Lal
,
G.
, 1988
, “
A Simple Analysis for Evaluating Grinding Wheel Loading
,” Int. J. Mach. Tools Manuf.
,
28
(2
), pp. 181
–190
.10.1016/0890-6955(88)90029-69.
Zhang
,
Z.
,
Zhang
,
L.
, and
Mai
,
Y.-W.
, 1996
, “
The Running-In Wear of a Steel/SiCp-Al Composite System
,” Wear
,
194
(1–2
), pp. 38
–43
.10.1016/0043-1648(95)06671-310.
Yang
,
L.
, 2004
, “
Prediction of Net Steady-State Wear Coefficient in an Al-Al2O3 (P)/Steel System With an Integrated Wear Model
,” Tribol. Lett.
,
17
(2
), pp. 105
–118
.10.1023/B:TRIL.0000032435.03421.0211.
Yang
,
L.
, 2007
, “
Modeling Transient Adhesive Wear of Tungsten Carbide Inserts Tested With an Angular Setting
,” Tribol. Int.
,
40
(7
), pp. 1075
–1088
.10.1016/j.triboint.2006.10.00512.
Kim
,
D.
,
Quagliato
,
L.
,
Park
,
D.
,
Murugesan
,
M.
,
Kim
,
N.
, and
Hong
,
S.
, 2017
, “
Wear-Caused Deflection Evolution of a Slide Rail, Considering Linear and Non-Linear Wear Models
,” J. Phys.: Conf. Ser.
,
843
, p. 012068
.10.1088/1742-6596/843/1/01206813.
Pourmostafaei
,
M.
,
Pourgol-Mohammad
,
M.
,
Yazdani
,
M.
, and
Salimi
,
H.
, 2018
, “
System Wear Life Estimation Under Uncertainty
,” ASME
Paper No. IMECE2018-87015.10.1115/IMECE2018-8701514.
Mang
,
T.
,
Bobzin
,
K.
, and
Bartels
,
T.
, 2011
, Industrial Tribology
,
Wiley-VCH
,
Weinheim, Germany
.15.
Yazdanipour
,
M.
,
Pourgol-Mohammad
,
M.
,
Choupani
,
N.-A.
, and
Yazdani
,
M.
, 2016
, “
Fatigue Life Prediction Based on Probabilistic Fracture Mechanics: Case Study of Automotive Parts
,” ASCE-ASME J. Risk Uncertainty Eng. Syst., Part B
,
2
(1
), p. 011002
.10.1115/1.403094616.
Bayer
,
R. G.
, 2004
, Mechanical Wear Fundamentals and Testing, Revised and Expanded
,
CRC Press
, New York.17.
Queener
,
C.
,
Smith
,
T.
, and
Mitchell
,
W.
, 1965
, “
Transient Wear of Machine Parts
,” Wear
,
8
(5
), pp. 391
–400
.10.1016/0043-1648(65)90170-518.
Sarkar
,
A.
, 1976
, Wear of Metals
(International Series on Materials Science and Technology, Vol.
18
),
Pergamon Press
, Oxford, UK.19.
Davis
,
J. R.
, 1995
, Tool Materials. ASM Speciality Handbook
,
ASM International
, Cleveland, OH.20.
Bressan
,
J.
,
Daros
,
D.
,
Sokolowski
,
A.
,
Mesquita
,
R.
, and
Barbosa
,
C.
, 2008
, “
Influence of Hardness on the Wear Resistance of 17-4 PH Stainless Steel Evaluated by the Pin-on-Disc Testing
,” J. Mater. Process. Technol.
,
205
(1–3
), pp. 353
–359
.10.1016/j.jmatprotec.2007.11.25121.
Pourgol-Mohamad
,
M.
,
Mosleh
,
A.
, and
Modarres
,
M.
, 2010
, “
Methodology for the Use of Experimental Data to Enhance Model Output Uncertainty Assessment in Thermal Hydraulics Codes
,” Reliab. Eng. Syst. Saf.
,
95
(2
), pp. 77
–86
.10.1016/j.ress.2009.08.00322.
Pourgol-Mohamad
,
M.
,
Mosleh
,
A.
, and
Modarres
,
M.
, 2011
, “
Structured Treatment of Model Uncertainty in Complex Thermal-Hydraulics Codes: Technical Challenges, Prospective and Characterization
,” Nucl. Eng. Des.
,
241
(1
), pp. 285
–295
.10.1016/j.nucengdes.2010.10.03523.
Chiachio
,
M.
,
Chiachio
,
J.
, and
Rus
,
G.
, 2012
, “
Reliability in Composites—A Selective Review and Survey of Current Development
,” Composites, Part B
,
43
(3
), pp. 902
–913
.10.1016/j.compositesb.2011.10.00724.
Modarres
,
M.
,
Kaminskiy
,
M. P.
, and
Krivtsov
,
V.
, 2016
, Reliability Engineering and Risk Analysis: A Practical Guide
,
CRC Press
, New York.25.
Salimi
,
H.
,
Kiad
,
S.
, and
Pourgol-Mohammad
,
M.
, 2018
, “
Stochastic Fatigue Crack Growth Analysis for Space System Reliability
,” ASCE-ASME J. Risk Uncertainty Eng. Syst., Part B
,
4
(2
), p. 021004
.10.1115/1.403721926.
Hitomi
,
K.
,
Nakamura
,
N.
, and
Inoue
,
S.
, 1979
, “
Reliability Analysis of Cutting Tools
,” ASME J. Eng. Ind.
,
101
(2
), pp. 185
–190
.10.1115/1.343949327.
Faal
,
M. Y.
,
Salimi
,
H.
,
Pourgol-Mohammad
,
M.
, and
Saray
,
R. K.
, 2017
, “
Life Assessment Based on Numerical Thermodynamic Entropy Estimation: Case Study of Metal Fatigue
,” ASME
Paper No. IMECE2017-71739.10.1115/IMECE2017-7173928.
Sankararaman
,
S.
,
Ling
,
Y.
, and
Mahadevan
,
S.
, 2011
, “
Uncertainty Quantification and Model Validation of Fatigue Crack Growth Prediction
,” Eng. Fract. Mech.
,
78
(7
), pp. 1487
–1504
.10.1016/j.engfracmech.2011.02.01729.
Bi
,
S.
,
Prabhu
,
S.
,
Cogan
,
S.
, and
Atamturktur
,
S.
, 2017
, “
Uncertainty Quantification Metrics With Varying Statistical Information in Model Calibration and Validation
,” AIAA J.
,
55
(10
), pp. 3570
–3583
.10.2514/1.J05573330.
Bi
,
S.
,
Broggi
,
M.
,
Wei
,
P.
, and
Beer
,
M.
, 2019
, “
The Bhattacharyya Distance: Enriching the P-Box in Stochastic Sensitivity Analysis
,” Mech. Syst. Signal Process.
,
129
, pp. 265
–281
.10.1016/j.ymssp.2019.04.03531.
Shiri
,
S.
,
Pourgol-Mohammad
,
M.
, and
Yazdani
,
M.
, 2014
, “
Probabilistic Assessment of Fatigue Life in Fiber Reinforced Composites
,” ASME
Paper No. IMECE2014-37434.10.1115/IMECE2014-3743432.
Moghanlou
,
L. N.
, and
Pourgol-Mohammad
,
M.
, 2017
, “
Assessment of the Pitting Corrosion Degradation Lifetime: A Case Study of Boiler Tubes
,” ASCE-ASME J. Risk Uncertainty Eng. Syst., Part B
,
3
(4
), p. 041002
.10.1115/1.403606433.
mathwave
, 2013
, “
EasyFit: Distribution Fitting Made Easy
,” mathwave, Dnipropetrovsk, Ukraine, http://www.mathwave.com/easyfit-distributionfitting.html34.
Caleyo
,
F.
,
Velázquez
,
J.
,
Valor
,
A.
, and
Hallen
,
J.
, 2009
, “
Probability Distribution of Pitting Corrosion Depth and Rate in Underground Pipelines: A Monte Carlo Study
,” Corros. Sci.
,
51
(9
), pp. 1925
–1934
.10.1016/j.corsci.2009.05.01935.
Lee
,
N.
,
Lim
,
Y.
, and
Kim
,
N.
, 2017
, “
Life Prediction of Bearing Using Accelerated Life Test Coupled With Analysis
,” J. Phys.: Conf. Ser.
, 843(1), p. 012068
.36.
Shiri
,
S.
,
Pourgol-Mohammad
,
M.
, and
Yazdani
,
M.
, 2016
, “
Prediction of Remaining Fatigue Cycles in Composite Materials Under Uncertainty
,” ASCE-ASME J. Risk Uncertainty Eng. Syst., Part B
,
2
(1
), p. 011001
.10.1115/1.4031037Copyright © 2020 by ASME
You do not currently have access to this content.
