A performance study is presented of a Rankine organic cycle powered by a low temperature solar collector. In this work a two-phase collector is considered where the heat transfer fluid is vaporized and its saturated vapor expands in a turbine according to a Rankine cycle. The collector system is divided into a boiling and a nonboiling (subcooled) part: The limit between the two depends upon the value of flow rate and radiation. A modified form of the Bliss equation is used to model the thermal performance of the collector in terms of thermal efficiency versus DTI [DTI= (Absorber average temperature-Ambient temperature)/ Solar Radiation]. The system is analyzed by second-law analysis, and it includes several exergy losses of different types (heat transfer, heat loss, etc.) which determine the overall exergy balance. Different working fluids are considered, and optimization to a certain extent is demonstrated from this point of view. In order to minimize irreversibilities and guarantee the most efficient conversion processes, the most important point is the right selection of the collector operating pressure level, which depends on the instantaneous value of radiation and ambient temperature (as well as on the collector thermal performance). The choice of the optimal pressure level is done by means of second-law arguments; the flow rates across the collector, the turbine, and the condenser are consequently determined. A simulation over a typical sunny day in Florence, Italy allows the calculation of the expected daily performance.
Skip Nav Destination
Article navigation
Research Papers
Exergy Control for a Flat-Plate Collector/Rankine Cycle Solar Power System
Giampaolo Manfrida,
Giampaolo Manfrida
Istituto di Energetica, Universita degli Studi di Perugia, Perugia, Italy
Search for other works by this author on:
Shukuru J. M. Kawambwa
Shukuru J. M. Kawambwa
Institute of Production Innovation, University of Dar es Salaam, Tanzania
Search for other works by this author on:
Giampaolo Manfrida
Istituto di Energetica, Universita degli Studi di Perugia, Perugia, Italy
Shukuru J. M. Kawambwa
Institute of Production Innovation, University of Dar es Salaam, Tanzania
J. Sol. Energy Eng. May 1991, 113(2): 89-93 (5 pages)
Published Online: May 1, 1991
Article history
Received:
March 7, 1990
Revised:
February 1, 1991
Online:
June 6, 2008
Citation
Manfrida, G., and Kawambwa, S. J. M. (May 1, 1991). "Exergy Control for a Flat-Plate Collector/Rankine Cycle Solar Power System." ASME. J. Sol. Energy Eng. May 1991; 113(2): 89–93. https://doi.org/10.1115/1.2929963
Download citation file:
Get Email Alerts
Mass Flow Control Strategy for Maximum Energy Extraction in Thermal Energy Storage Tanks
J. Sol. Energy Eng (December 2025)
Related Articles
Performance Evaluation of an Evacuated Flat-Plate Collector System for Domestic Hot Water Applications
J. Sol. Energy Eng (October,2023)
Numerical Simulation of Direct Solar Vapor Generation of Acetone for an Organic Rankine Cycle Using an Evacuated Tube Collector
J. Sol. Energy Eng (April,2021)
Exergy Optimization of a Novel Combination of a Liquid Air Energy Storage System and a Parabolic Trough Solar Collector Power Plant
J. Energy Resour. Technol (August,2019)
Analysis of Boiling Flat-Plate Collectors
J. Sol. Energy Eng (May,1986)
Related Proceedings Papers
Related Chapters
Combined Cycle Power Plant
Energy and Power Generation Handbook: Established and Emerging Technologies
Energy Balance for a Swimming Pool
Electromagnetic Waves and Heat Transfer: Sensitivites to Governing Variables in Everyday Life
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential