The earlier aerodynamic models for studying vertical axis wind turbines (VAWT’s) are based on constant incident wind conditions and are thus capable of predicting only periodic variations in the loads. The purpose of the present study is to develop a mode capable of predicting the aerodynamic loads on the Darrieus rotor in a turbulent wind. This model is based on the double-multiple streamtube method (DMS) and incorporates a stochastic wind model The method used to simulate turbulent velocity fluctuations is based on the power spectral density. The problem consists in generating a region of turbulent flow with a relevant spectrum and spatial correlation. The first aerodynamic code developed is based on a one-dimensional turbulent wind model. However, since this model ignores the structure of the turbulence in the crossflow plane, an extension to three dimensions has been made. The computer code developed, CARDAAS, has been used to predict aerodynamic loads for the Sandia-17m rotor and compared to CARDAAV results and experimental data. Results have shown that the computed aerodynamic loads have been improved by including stochastic wind into the aerodynamic model.

1.
Akins, R. E., and Berg, D. E. Cyrus, 1987, “Measurements and Calculations of Aerodynamic Torques for a Vertical Axis Wind Turbine,” Sandia National Laboratories, SAND86-2164, Albuquerque, NM.
2.
Akins, R. E., 1989, “Measurements of Surface Pressure on an Operating Vertical Axis Wind Turbine,” Sandia National Laboratories, SAND89-7051, Albuquerque, NM.
3.
Brochier
G.
,
Fraunier
P.
,
Beguier
C.
, and
Paraschivoiu
I.
,
1986
, “
Water Channel Experiments of Dynamic Stall on Darrieus Wind Turbine Blades
,”
Journal of Propulsion and Power
, Vol.
2
, No.
9
, pp.
445
449
.
4.
De´sy, P., Beguier, C., and Paraschivoiu, I., 1986, “Experimental Study of Dynamic Stall for an Oscillating Blade,” EPM/RT-86-25, Dept. of Mechanical Eng., E´cole Polytechnique de Montre´al, Montre´al.
5.
Frost, W., Long, B. H., and Turner, R. E., 1978, “Engineering Handbook on the Atmospheric Environmental Guidelines for Use in Wind Turbine Generator Development,” NASA Technical Paper 1359.
6.
Gormont, R. E., 1973, “A Mathematical Model of unsteady Aerodynamics and Raidal Flow for Application to Helicopter Rotors,” USAAMRDL, TR-72-67.
7.
Homicz, G. F., 1988, “VAWT Stochastic Loads Produced by Atmospheric Turbulence,” Proceedings of the 7th ASME Wind Energy Symposium, New Orleans, LA, Jan. 10–14, SED Vol. 5, pp. 127–137.
8.
Homicz
G. F.
,
1989
, “
VAWT Stochastic Loads Produced by Atmospheric Turbulence
,”
ASME JOURNAL OF SOLAR ENERGY ENGINEERING
, Vol.
111
, pp.
358
366
.
9.
Lobitz, D. W., 1984, “NASTRAN-Based Software for the Structural Dynamic Analysis of Horizontal Axis Wind Turbines,” Proceedings of the European Wind Energy Conference, Hamburg, Germany, W. Palz, ed., Commission of the European Communities, published by H. S. Stephens and Associates, Bedford, England, 1985.
10.
Malcolm, D. J., 1987, “Vertical Axis Wind Turbine Turbulent Wind Response Model,” Final Report, Vol. 1 and 2, Indal Technologies, Inc., (also Sandia National Laboratories, SAND88-7021, Albuquerque, NM, July, 1988).
11.
Marchand, O., Brahimi, M. T., and Paraschivoiu, I., 1987, “Stochastic Wind Effects on Vertical Axis Wind Turbines,” Proceedings of the Canadian Wind Energy Conference, Calgary, pp. 273–301.
12.
Paraschivoiu
I.
,
1988
a, “
Double-Multiple Streamtube Model for Studying VAWT’s
,”
Journal of Propulsion and Power
, Vol.
4
, No.
4
, pp.
370
378
.
13.
Paraschivoiu, I., 1988b, “Aerodynamic Models and Experiments for Studying Darrieus Wind Turbines,” Proceedings of the European Community Wind Energy Conference, Herning, Denmark, pp. 617–622.
14.
Powell, D. C., and Conell, J. R., 1986, “A Model for Simulating Rotational Data for Wind Turbine Applications,” Pacific Northwest Laboratory Report PNL–5857.
15.
Shinozuka
M.
, and
Jan
C. M.
,
1972
, “
Digital Simulation of Random Processes and its Applications
,”
Journal of Sound and Vibration
, Vol.
25
, No.
1
, pp.
111
128
.
16.
Solari
G.
,
1987
, “
Turbulence Modeling for Gust Loading
,”
Journal of Structural Engineering, ASCE
, Vol.
113
, No.
7
, pp.
1550
1569
.
17.
Strickland, J. H., 1986, “A Review of Aerodynamic Analysis Methods for Vertical Axis Wind Turbine,” Proceedings of the 5th ASME Wind Energy Symposium, New Orleans, LA, pp. 1–7.
18.
Strickland, J. H., 1987, “VAWT Stochastic Wind Simulation,” National Laboratories SAND87-0501, Albuquerque, NM.
19.
Turyan
K. J.
,
Strickland
J. H.
, and
Berg
D. E.
,
1987
, “
Electric Power from Vertical Axis Wind Turbines
,”
AIAA Journal of Propulsion and Power
, Vol.
3
, No.
6
, pp.
481
493
.
20.
Veers, P. S., 1984, “Modeling Stochastic Wind Loads on Vertical Axis Wind Turbines,” Sandia National Laboratories SAND83-2909, Albuquerque, NM.
21.
Veers, P. S., 1988, “Three-dimensional Wind Simulation, Sandia National Laboratories,” SAND88-0152, Albuquerque, NM.
This content is only available via PDF.
You do not currently have access to this content.