Heat exchangers with boiling in coils are widely used in the industry. Various researchers have recommended different correlations for heat transfer but there has been no comprehensive comparison of data and correlations to identify the most reliable ones. This was done in the present study. Eight correlations for straight tubes and six for coils were compared with data from 12 studies. The data included four fluids, tube diameters 2.8–14.5 mm, coil to tube diameter ratios 12–107, reduced pressure 0.0046–0.7857, flow rates 80–1200 kg m−2 s−1, and boiling number 0.16–13.6 × 104. None of the correlations for coils were found satisfactory. Four general correlations for straight tubes gave good agreement with the 484 data points, mean absolute deviation (MAD) being 19.8–22.6%.
Skip Nav Destination
Article navigation
June 2019
Research-Article
Prediction of Heat Transfer During Saturated Boiling in Helical Coils
Mirza M. Shah
Mirza M. Shah
Fellow ASME
Engineering Research Associates,
10 Dahlia Lane,
Redding, CT 06896
e-mail: Mshah.erc@gmail.com
Engineering Research Associates,
10 Dahlia Lane,
Redding, CT 06896
e-mail: Mshah.erc@gmail.com
Search for other works by this author on:
Mirza M. Shah
Fellow ASME
Engineering Research Associates,
10 Dahlia Lane,
Redding, CT 06896
e-mail: Mshah.erc@gmail.com
Engineering Research Associates,
10 Dahlia Lane,
Redding, CT 06896
e-mail: Mshah.erc@gmail.com
Contributed by the Heat Transfer Division of ASME for publication in the JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS. Manuscript received October 28, 2018; final manuscript received December 10, 2018; published online February 6, 2019. Assoc. Editor: Wei Li.
J. Thermal Sci. Eng. Appl. Jun 2019, 11(3): 031013 (7 pages)
Published Online: February 6, 2019
Article history
Received:
October 28, 2018
Revised:
December 10, 2018
Citation
Shah, M. M. (February 6, 2019). "Prediction of Heat Transfer During Saturated Boiling in Helical Coils." ASME. J. Thermal Sci. Eng. Appl. June 2019; 11(3): 031013. https://doi.org/10.1115/1.4042354
Download citation file:
Get Email Alerts
Cited By
Numerical simulation of enhanced geothermal system with complex fracture networks
J. Thermal Sci. Eng. Appl
Multi-objective optimization of an inlet air-cooled combined cycle power plant
J. Thermal Sci. Eng. Appl
Related Articles
The Influence of Surface Roughness on Nucleate Pool Boiling Heat Transfer
J. Heat Transfer (December,2009)
Submerged Jet Impingement Boiling of Water Under Subatmospheric Conditions
J. Heat Transfer (February,2012)
An Experimental Investigation on Flow Boiling of Ethylene-Glycol/Water Mixtures
J. Heat Transfer (April,2003)
Flow Boiling Heat Transfer Characteristics of a Minichannel up to Dryout Condition
J. Heat Transfer (August,2011)
Related Proceedings Papers
Related Chapters
Thermal Design Guide of Liquid Cooled Systems
Thermal Design of Liquid Cooled Microelectronic Equipment
Post-CHF Heat Transfer in Flow Boiling
Two-Phase Heat Transfer
Fundamentals of Convective and Boiling Heat Transfer
Thermal Design of Liquid Cooled Microelectronic Equipment