The convective heat transfer process between the orthogonal air jet impingement on a uniformly heated flat plate is studied numerically. In this numerical study, three-dimensional (3D) simulations are carried out in Fluent 14.0 to investigate the effect of Reynolds number, distance between nozzle exit and the plate on the heat transfer characteristics. V2F turbulence model has been used to model turbulence. Standard κ–ε, Realizable κ–ε, κ–ε RNG, SST κ–ω, Standard κ–ω, V2F turbulence models have been studied for orthogonal jet impingement in this work. It is observed that for jet exit to plate distance (Z/d) of 0.5 ≤ Z/d ≤ 6, V2F model is best suited. For Z/d ≤ 0.5 and Z/d ≥ 6, numerical results vary significantly from the experimental results. Reynolds number of 12,000, 20,000, and 28,000 has been studied. In this paper, results for various jet exit to the plate distance (Z/d) from 0.5 to 10 are presented. At low jet plate spacing Z/d < 4, secondary peak in Nusselt number distribution over the plate is visible in experimental results. V2F model correctly predicts the secondary peak in Nusselt number variation over the plate. Other models fail to predict the secondary peak which is of significant importance in air jet impingement at low jet-plate spacing (Z/d < 4).
Convective Heat Transfer From a Heated Plate to the Orthogonally Impinging Air Jet
Contributed by the Heat Transfer Division of ASME for publication in the JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS. Manuscript received November 9, 2015; final manuscript received June 9, 2016; published online August 2, 2016. Assoc. Editor: Ali J. Chamkha.
Bhagwat, A. B., and Sridharan, A. (August 2, 2016). "Convective Heat Transfer From a Heated Plate to the Orthogonally Impinging Air Jet." ASME. J. Thermal Sci. Eng. Appl. December 2016; 8(4): 041009. https://doi.org/10.1115/1.4034058
Download citation file: